Heterogeneity in lobar and near-acini deposition of inhaled aerosol in the mouse lung.
Ontology highlight
ABSTRACT:
SUBMITTER: Gu W
PROVIDER: S-EPMC7480823 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:BackgroundThe understanding of inhaled particle respiratory tract deposition is a key link to understand the health effects of particles or the efficiency for medical drug delivery via the lung. However, there are few experimental data on particle respiratory tract deposition, and the existing data deviates considerably when comparing results for particles > 1 μm.MethodsWe designed an experimental set-up to measure deposition in the respiratory tract for particles > 1 μm, more specifically 2.3 μm, with careful consideration to minimise foreseen errors. We measured the deposition in seventeen healthy adults (21-68 years). The measurements were performed at tidal breathing, during three consecutive 5-minute periods while logging breathing patterns. Pulmonary function tests were performed, including the new airspace dimension assessment (AiDA) method measuring distal lung airspace radius (rAiDA). The lung characteristics and breathing variables were used in statistical models to investigate to what extent they can explain individual variations in measured deposited particle fraction. The measured particle deposition was compared to values predicted with whole lung models. Model calculations were made for each subject using measured variables as input (e.g., breathing pattern and functional residual capacity).ResultsThe measured fractional deposition for 2.3 μm particles was 0.60 ± 0.14, which is significantly higher than predicted by any of the models tested, ranging from 0.37 ± 0.08 to 0.53 ± 0.09. The multiple-path particle dosimetry (MPPD) model most closely predicted the measured deposition when using the new PNNL lung model. The individual variability in measured particle deposition was best explained by breathing pattern and distal airspace radius (rAiDA) at half inflation from AiDA. All models underestimated inter-subject variability even though the individual breathing pattern and functional residual capacity for each participant was used in the model.ConclusionsWhole lung models need to be tuned and improved to predict the respiratory tract particle deposition of micron-sized particles, and to capture individual variations - a variation that is known to be higher for aged and diseased lungs. Further, the results support the hypothesis that the AiDA method measures dimensions in the peripheral lung and that rAiDA, as measured by the AiDA, can be used to better understand the individual variation in the dose to healthy and diseased lungs.
| S-EPMC10594870 | biostudies-literature
Project description:BackgroundInformation on particle deposition, retention and clearance are important for the evaluation of the risk of inhaled nanomaterials to human health. Recent revised OECD inhalation toxicity test guidelines require to evaluate the lung burden of nanomaterials after rodent subacute and subchronic inhalation exposure (OECD 412, OECD 413). These revised test guidelines require additional post-exposure observation (PEO) periods that include lung burden measurements that can inform on lung clearance behavior and translocation. The latter being particularly relevant when the testing chemical is a solid poorly soluble nanomaterial. Therefore, in the spirit of 3 R's, we investigated whether measurement of retained lung burden of inhaled nanoparticles (NPs) in individual lung lobes is sufficient to determine retained lung burden in the total lung. If it is possible to use only one lobe, it will reduce animal use and maximize the number of endpoints evaluated.ResultsTo achieve these goals, rats were exposed nose-only for 1 or 5 days (6 h/day) to an aerosol of 20 nm well-dispersed silver nanoparticles (AgNPs), which is the desired particle diameter resulting in maximum deposition in the pulmonary region when inhaled as singlets. After exposure, the five lung lobes were separated and silver concentration was measured using inductively coupled plasma-mass spectrophotometer (ICP-MS). The results showed that the retention of deposited silver nanoparticle in the different lung lobes did not show any statistically significant difference among lung lobes in terms of silver mass per gram lung lobe. This novel finding of evenness of retention/deposition of inhaled 20 nm NPs in rats for all five lobes in terms of mass per unit tissue weight contrasts with earlier studies reporting greater apical lobe deposition of inhaled micro-particles in rodents. The difference is most likely due to preferred and efficient deposition of inhaled NPs by diffusion vs. additional deposition by sedimentation and impaction for micron-sized particles.ConclusionAgNPs following acute inhalation by rats are evenly retained in each lung lobe in terms of mass per unit lung tissue weight. Accordingly, we suggest sampling any of the rat lung lobes for lung burden analysis can be used to determine deposited or retained total lung burden after short-term inhalation of NPs and using the other lobes for collecting and analyzing bronchoalveolar lavage fluid (BALF) and for histopathological analysis. Therefore, by combining lung burden measurement, histopathological tissue preparation, and BALF assay in the same rat will reduce the number of animals used and maximize the number of endpoints measured.
| S-EPMC6322301 | biostudies-literature
Project description:Coronavirus disease 2019 (COVID-19), due to infection by the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), is now causing a global pandemic. Aerosol transmission of COVID-19, although plausible, has not been confirmed by the World Health Organization (WHO) as a general transmission route. Considering the rapid spread of SARS-CoV-2, especially nosocomial outbreaks and other superspreading events, there is an urgent need to study the possibility of airborne transmission and its impact on the lung, the primary body organ attacked by the virus. Here, we review the complete pathway of airborne transmission of SARS-CoV-2 from aerosol dispersion in air to subsequent biological uptake after inhalation. In particular, we first review the aerodynamic and colloidal mechanisms by which aerosols disperse and transmit in air and deposit onto surfaces. We then review the fundamental mechanisms that govern regional deposition of micro- and nanoparticles in the lung. Focus is given to biophysical interactions between particles and the pulmonary surfactant film, the initial alveolar-capillary barrier and first-line host defense system against inhaled particles and pathogens. Finally, we summarize the current understanding about the structural dynamics of the SARS-CoV-2 spike protein and its interactions with receptors at the atomistic and molecular scales, primarily as revealed by molecular dynamics simulations. This review provides urgent and multidisciplinary knowledge toward understanding the airborne transmission of SARS-CoV-2 and its health impact on the respiratory system.
| S-EPMC7724984 | biostudies-literature
Project description:BackgroundCT scanning is increasingly used to characterize COPD. Although it is possible to obtain CT scan-measured lung lobe volumes, normal ranges remain unknown. Using COPDGene data, we developed reference equations for lobar volumes at maximal inflation (total lung capacity [TLC]) and relaxed exhalation (approximating functional residual capacity [FRC]).MethodsLinear regression was used to develop race-specific (non-Hispanic white [NHW], African American) reference equations for lobar volumes. Covariates included height and sex. Models were developed in a derivation cohort of 469 subjects with normal pulmonary function and validated in 546 similar subjects. These cohorts were combined to produce final prediction equations, which were applied to 2,191 subjects with old GOLD (Global Initiative for Chronic Obstructive Lung Disease) stage II to IV COPD.ResultsIn the derivation cohort, women had smaller lobar volumes than men. Height positively correlated with lobar volumes. Adjusting for height, NHWs had larger total lung and lobar volumes at TLC than African Americans; at FRC, NHWs only had larger lower lobes. Age and weight had no effect on lobar volumes at TLC but had small effects at FRC. In subjects with COPD at TLC, upper lobes exceeded 100% of predicted values in GOLD II disease; lower lobes were only inflated to this degree in subjects with GOLD IV disease. At FRC, gas trapping was severe irrespective of disease severity and appeared uniform across the lobes.ConclusionsReference equations for lobar volumes may be useful in assessing regional lung dysfunction and how it changes in response to pharmacologic therapies and surgical or endoscopic lung volume reduction.
| S-EPMC3673661 | biostudies-literature
Project description:BackgroundThe effectiveness of metered-dose inhalers (MDIs) in delivering medication to the lungs highly depends on its correct usage technique. Current guidelines state optimal technique for high lung deposition should include a slow inhalation (>5 seconds) at an inspiratory flow rate of 30 L/min and inhaler actuation at the start of inhalation. However, these recommendations were based on clinical studies using CFC (chlorofluorocarbon)-MDIs and in vitro studies of HFA (hydrofluoroalkane)-MDIs using idealized MDI techniques of uniform inhalation and actuation, disregarding the nonuniform techniques of actual patients.MethodsTo better understand the effects of time-varying MDI usage parameters on lung deposition of aerosol delivered by an HFA-MDI, we conducted an in vitro study modeled on real-life variable inspiratory flow and actuation techniques recorded from 15 subjects with asthma/chronic obstructive pulmonary disease (COPD). We developed a model representing the time-varying inspiratory flow waveforms and actuation timings based on 43 MDI techniques recorded from patients. Furthermore, we constructed an in vitro experimental setup using a mouth-throat cast, programmable MDI actuator, and breath simulator to evaluate lung deposition for the MDI techniques derived from our model.ResultsHigh inspiratory flow rates, 60-90 L/min, consistently resulted in high in vitro lung deposition (>40%) of aerosol (albuterol delivered from Ventolin HFA-MDI) compared to 30 L/min when MDI actuation occurred in the first half of inhalation. Also, positive coordination resulted in higher in vitro lung deposition compared with negative or zero coordination (actuating before or at the start of inspiration). Furthermore, variation in coordination affected lung deposition more significantly (23%) than flow rate or duration of inspiration (≤5%).ConclusionsIn an in vitro experimental model based on inhalation data from patients with asthma and COPD, we demonstrated that aerosol lung deposition emitted from Ventolin HFA-MDI is most optimal for MDI actuation in the first half of inspiration at high flow rates (60-90 L/min).
| S-EPMC5564031 | biostudies-literature
Project description:Aerodynamic forces provide the primary means of distributing aerosol medications within the lungs. Partial airway obstructions can limit both air flow and aerosol penetration into diseased zones. We hypothesize that low surface tension additives may help to disperse aerosol medications after deposition in the airways, improving dose uniformity and drug delivery to underventilated regions. To test this, we performed a pilot scintigraphy study of surfactant and saline deposition and postdeposition dispersion.Because inhaled antibiotics for cystic fibrosis provide an example of where self-dispersing medications may be useful, we administered calfactant and saline aerosols with added Technetium 99m sulfur colloid (Tc-SC; 100?nm filtered) on different days in randomized order to eight cystic fibrosis (CF) subjects (average FEV(1)%, p=85 ± 12%). Nebulized delivery was matched (similar aerosol sizes and volume delivery rates, fixed breathing patterns). Tc-SC distribution in the lungs was imaged continuously for 30?min after delivery.Both aerosols were well tolerated. Aerosol distribution was mostly peripheral (58/42%) and initially similar for saline and surfactant. Changes in whole lung counts after 30?min were also similar. Peripheral lung activity decreased more rapidly on average with calfactant though the difference versus saline was not statistically significant. Central to peripheral count ratio decreased with saline and increased with calfactant and c/p changes approached significance (-0.05 ± 0.16 vs. 0.10 ± 0.10; p=0.07 Wilcoxon).Our results lack statistical significance, but suggest that inhaled calfactant increased peripheral clearance, due to either surfactant-based dispersion or mucociliary effects. Further studies are needed to define the potential for low surface tension carriers to improve drug delivery.
| S-EPMC3817860 | biostudies-literature
Project description:To test the hypothesis that autoimmunity induced by inhalation of aerosolized brain tissue caused outbreaks of sensory-predominant polyradiculoneuropathy among swine abattoir employees in the Midwestern United States.Mice were exposed intranasally, 5 days per week, to liquefied brain tissue. Serum from exposed mice, patients, and unaffected abattoir employees were analyzed for clinically pertinent neural autoantibodies.Patients, coworkers, and mice exposed to liquefied brain tissue had an autoantibody profile dominated by neural cation channel immunoglobulin Gs (IgGs). The most compelling link between patients and exposed mice was magnetic resonance imaging (MRI) evidence of grossly swollen spinal nerve roots. Autoantibody responses in patients and mice were dose-dependent and declined after antigen exposure ceased. Autoantibodies detected most frequently, and at high levels, bound to detergent-solubilized macromolecular complexes containing neuronal voltage-gated potassium channels ligated with a high affinity Kv1 channel antagonist, 125I-?-dendrotoxin. Exposed mice exhibited a behavioral phenotype consistent with potassium channel dysfunction recognized in drosophila with mutant ("shaker") channels: reduced sensitivity to isoflurane-induced anesthesia. Pathological and electrophysiological findings in patients supported peripheral nerve hyperexcitability over destructive axonal loss. The pain-predominant symptoms were consistent with sensory nerve hyperexcitability.Our observations establish that inhaled neural antigens readily induce neurological autoimmunity and identify voltage-gated potassium channel complexes as a major immunogen.
| S-EPMC3315155 | biostudies-literature
Project description:BackgroundAirborne environmental and engineered nanoparticles (NPs) are inhaled and deposited in the respiratory system. The inhaled dose of such NPs and their deposition location in the lung determines their impact on health. When calculating NP deposition using particle inhalation models, a common approach is to use the bulk material density, ρb, rather than the effective density, ρeff. This neglects though the porous agglomerate structure of NPs and may result in a significant error of their lung-deposited dose and location.ResultsHere, the deposition of various environmental NPs (aircraft and diesel black carbon, wood smoke) and engineered NPs (silica, zirconia) in the respiratory system of humans and mice is calculated using the Multiple-Path Particle Dosimetry model accounting for their realistic structure and effective density. This is done by measuring the NP ρeff which was found to be up to one order of magnitude smaller than ρb. Accounting for the realistic ρeff of NPs reduces their deposited mass in the pulmonary region of the respiratory system up to a factor of two in both human and mouse models. Neglecting the ρeff of NPs does not alter significantly the distribution of the deposited mass fractions in the human or mouse respiratory tract that are obtained by normalizing the mass deposited at the head, tracheobronchial and pulmonary regions by the total deposited mass. Finally, the total deposited mass fraction derived this way is in excellent agreement with those measured in human studies for diesel black carbon.ConclusionsThe doses of inhaled NPs are overestimated by inhalation particle deposition models when the ρb is used instead of the real-world effective density which can vary significantly due to the porous agglomerate structure of NPs. So the use of realistic ρeff, which can be measured as described here, is essential to determine the lung deposition and dosimetry of inhaled NPs and their impact on public health.
| S-EPMC10874077 | biostudies-literature
Project description:UnlabelledDeath-associated protein kinase (DAPK3) is a serine/threonine kinase involved in various signaling pathways important to tissue homeostasis and mammalian biology. Considered to be a putative tumor suppressor, the molecular mechanism by which DAPK3 exerts its suppressive function is not fully understood and the field lacks an appropriate mouse model. To address these gaps, an in vitro three-dimensional tumorigenesis model was used and a constitutive DAPK3-knockout mouse was generated. In the 3D morphogenesis model, loss of DAPK3 through lentiviral-mediated knockdown enlarged acinar size by accelerated acini proliferation and apoptosis while maintaining acini polarity. Depletion of DAPK3 enhanced growth factor-dependent mTOR activation and, furthermore, enlarged DAPK3 acini structures were uniquely sensitive to low doses of rapamycin. Simultaneous knockdown of RAPTOR, a key mTORC1 component, reversed the augmented acinar size in DAPK3-depleted structures indicating an epistatic interaction. Using a validated gene trap strategy to generate a constitutive DAPK3-knockout mouse, it was demonstrated that DAPK3 is vital for early mouse development. The Dapk3 promoter exhibits spatiotemporal activity in developing mice and is actively expressed in normal breast epithelia of adult mice. Importantly, reduction of DAPK3 expression correlates with the development of ductal carcinoma in situ (DCIS) and more aggressive breast cancer as observed in the Oncomine database of clinical breast cancer specimens.ImplicationsNovel cellular and mouse modeling studies of DAPK3 shed light on its tumor-suppressive mechanisms and provide direct evidence that DAPK3 has relevance in early development.
| S-EPMC4336824 | biostudies-literature
Project description:The existence and identity of multipotent stem cells in the adult lung is currently highly debated. At present, it remains unclear whether candidate stem/progenitor cells are located in the airways, alveoli, or throughout the epithelial lining of the lung. Here, we introduce a method of airway microdissection, which enabled us to study the progenitor behavior of pulmonary epithelial cells in region-specific contexts. The progenitor characteristics of epithelial cells isolated from the trachea, proximal and distal airways, and lung parenchyme were evaluated in vitro and in vivo. We identified a population of airway-derived basal-like epithelial cells with the potential to self-renew and differentiate into airway and alveolar lineages in culture and in vivo after subcutaneous transplantation. The multipotent candidate progenitors originated from a minor fraction of the airway epithelial cell population characterized by high expression of ?6 integrin. Results of the current study provide new insights into the regenerative potential of region-specific integrin ?6-positive pulmonary epithelial cells.
| S-EPMC4216526 | biostudies-literature