Dataset Information

Three-dimensional reconstruction/personalized three-dimensional printed model for thoracoscopic anatomical partial-lobectomy in stage I lung cancer: a retrospective study.

ABSTRACT: Background:Considering the complexity of vascular or bronchial variations and the difficulty of nodule localization during segmental resection, the three-dimensional (3D) reconstruction and printing model can provide a guarantee for safe operation and, to some extent, can simplify the surgical procedure. We conducted this study to estimate the avail of 3D reconstruction and personalized model in anatomical partial-lobectomy (APL). Methods:We prospectively collected and retrospectively reviewed the data of 298 cases who underwent APL in our institute from April 2017 to May 2019. The patients were divided into "3D-reconstruction" group (131 patients), "3D model" group (31 patients) and "non-3D" group (136 patients). We adopted the ANOVA analysis and Chi-square test to compare the perioperative data between the three groups. Subjective satisfaction questionnaires for surgeons were provided to evaluate the value of personalized 3D printed model. Results:The proportion of complex segmentectomy in 3D model group (87.1%) was significantly higher than that in the 3D-reconstruction group (60.3%) and non-3D group (55.9%) (P=0.006), and the average operation time of complex segmentectomy in 3D model group (99.56 minutes) was significantly shorter than that of the other group (all P<0.05). The average intraoperative blood loss in the 3D model group (12.9 mL) was significantly lower than that in the 3D reconstruction group (20.9 mL) (P=0.001) and non-3D group (18.2 mL) (P=0.022). For simple segmentectomy, the operation time, postoperative drainage, and postoperative hospital stay were similar among the three groups. The questionnaire survey showed that most surgeons were satisfied with the clinical effectiveness of the personalized 3D printed model. Conclusions:3D printing technology can improve understanding of the anatomy, decrease the operation time, and reduce the potential risk of thoracoscopic anatomical partial lobectomy in stage I lung cancer. A pre-operative rating scale was designed to standardize the application of this technology.

SUBMITTER: Qiu B

PROVIDER: S-EPMC7481601 | biostudies-literature | 2020 Aug

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Three-dimensional reconstruction/personalized three-dimensional printed model for thoracoscopic anatomical partial-lobectomy in stage I lung cancer: a retrospective study.

Qiu Bin B Ji Ying Y He Huayu H Zhao Jun J Xue Qi Q Gao Shugeng S

Translational lung cancer research 20200801 4

<h4>Background</h4>Considering the complexity of vascular or bronchial variations and the difficulty of nodule localization during segmental resection, the three-dimensional (3D) reconstruction and printing model can provide a guarantee for safe operation and, to some extent, can simplify the surgical procedure. We conducted this study to estimate the avail of 3D reconstruction and personalized model in anatomical partial-lobectomy (APL).<h4>Methods</h4>We prospectively collected and retrospecti ...[more]

PMID: 32953501

Similar Datasets

Project description:BackgroundReconstruction of pelvis girdle stability after tumor-induced hemipelvectomy remains challenging. We surgically treated 13 patients with custom-made, three-dimensional printed hemipelvic prostheses. We aim to identify the preliminary outcomes for patients who have been managed with more mixed regions of prosthetic pelvic reconstruction and the feasibility of two reconstructive systems.MethodsSeven male patients and 6 female patients treated at our center between January 2019 and May 2021 were included. There were 11 primary sarcomas and 2 solitary bone metastases. After en bloc tumor resection, two types of personalized, three-dimensional printed prostheses were fixed to restore the stability and rebuild the load transfer. The position of the reconstructed hemipelvis was evaluated on an anteroposterior plain radiograph. The complications and outcomes were traced. One amputation specimen was discovered through histological analysis of the porous structure.ResultsThe operative duration was 467 ± 144 min, and the blood loss was 3,119 ± 662 ml. During a follow-up of 22.4 ± 8.5 months, two patients had delayed wound healing and one had a second-stage flap transfer. One patient with osteosarcoma died of pulmonary metastasis 27 months after surgery. Two patients with marginal resection suffered from local recurrence and had extra surgeries. One patient had traumatic hip dislocation 2 months after surgery and manipulative reduction was performed. The acetabular inclination of the affected side was 42.2 ± 4.3°, compared with 42.1 ± 3.9° on the contralateral side. The horizontal distance between the center of the femoral head and the middle vertical line was 10.4 ± 0.6 cm, while the reconstructed side was 9.8 ± 0.8 cm. No significant difference in acetabular position after surgery was found (p > 0.05). The amputation specimen harvested from one patient with local recurrence demonstrated bone and soft tissue ingrowth within the three-dimensional printed trabecular structure. Walking ability was preserved in all patients who are still alive and no prosthesis-related complications occurred. The MSTS score was 22.0 ± 3.7.ConclusionsBoth types of custom-made, three-dimensional printed prostheses manifested excellent precision, mechanical stability, and promising functional rehabilitation. The porous structure exhibited favorable histocompatibility to facilitate the ingrowth of bone and soft tissue.

Project description:RATIONALE:Video-assisted thoracoscopic surgery (VATS) and open lobectomy are both standard of care for the treatment of early-stage non-small cell lung cancer (NSCLC) because of equivalent long-term survival. OBJECTIVES:To evaluate whether the improved perioperative outcomes associated with VATS lobectomy are explained by surgeon characteristics, including case volume and specialty training. METHODS:We analyzed the Surveillance, Epidemiology, and End Results-Medicare-linked registry to identify stage I-II NSCLC in patients above 65 years of age. We used a propensity score model to adjust for differences in patient characteristics undergoing VATS versus open lobectomy. Perioperative complications, extended length of stay, and perioperative mortality among patients were compared after adjustment for surgeon's volume and specialty using linear mixed models. We compared survival using a Cox model with robust standard errors. RESULTS:We identified 9,508 patients in the registry who underwent lobectomy for early-stage NSCLC. VATS lobectomies were more commonly performed by high-volume surgeons (P?<?0.001) and thoracic surgeons (P?=?0.01). VATS lobectomy was associated with decreased adjusted odds of cardiovascular complications (odds ratio [OR]?=?0.65; 95% confidence interval [CI]?=?0.47-0.90), thromboembolic complications (OR?=?0.47; 95% CI?=?0.38-0.58), extrapulmonary infections (OR?=?0.75; 95% CI?=?0.61-0.94), extended length of stay (OR?=?0.47; 95% CI?=?0.40-0.56), and perioperative mortality (OR?=?0.33; 95% CI?=?0.23-0.48) even after controlling for differences in surgeon volume and specialty. Long-term survival was equivalent for VATS and open lobectomy (hazard ratio?=?0.95; 95% CI?=?0.85-1.08) after controlling for patient and tumor characteristics, surgeon volume, and specialization. CONCLUSIONS:VATS lobectomy for NSCLC is associated with better postoperative outcomes, but similar long-term survival, compared with open lobectomy among older adults, even after controlling for surgeon experience.

Project description:BackgroundPrevious classification of renal pelvicalyceal anatomical structure may be difficult to intuitively understand and unpractical for endourological surgery. We aim to put forward a modified Takazawa anatomical classification of renal pelvicalyceal system based on three-dimensional (3D) virtual reconstruction models for endourological surgery.MethodsWe retrospectively collected data on 225 patients (320 kidneys) in total between Apr. 2017 and Dec. 2020, spatial anatomical structure of renal pelvis and calyces were modeled and corresponding morphological parameters were measured after 3D virtual reconstruction of computed tomography urography (CTU). The modified Takazawa renal pelvicalyceal anatomical classification was advanced based on the renal pelvicalyceal morphological parameters [bifurcated branches of renal pelvis, cross sectional area of renal pelvis and ureteropelvic junction (UPJ), infundibuloureteral angle (IUA), lower pole infundibular calyceal length (IL)] by 3D virtual reconstruction models, and comparison of renal pelvicalyceal system morphological parameters were performed to evaluate the differences in various classification types of renal pelvis and calyces.ResultsAnatomical structure of renal pelvis and calyces were divided into two main types (Type A and Type B) according to renal pelvic branch patterns. A single pelvis without bifurcated branch was regarded as Type A (62%) and subclassified into three subtypes: Type A1 (22%), Type A2 (27%) and Type A3 (13%), the slimline pelvis was classified as Type A1, the typical pelvis as Type A2 and the broad pelvis as Type A3. A divided pelvis with bifurcated branches was seen as Type B (38%) and subclassified into two subtypes: Type B1 (15%) with the wide and flat lower calyx branch, Type B2 (23%) with the narrow and steep lower calyx branch.ConclusionsPrevious studies have reported that the visualization and classification of renal pelvicalyceal anatomical structure by endocast, autopsy, ultrasonography and excretory urography, the modified Takazawa classification system based on 3D virtual reconstruction models enables to standardized different anatomical morphology of renal pelvicalyceal system and provide intuitive and concise information on anatomy, thus leading to the improvement in treatment modality.

Project description:ObjectiveAnatomical segmentectomy has been proven to be a viable surgical treatment for small-size peripheral lung nodules. Three-dimensional (3D) reconstruction computed tomography (CT) has been proposed as an effective approach to overcome the challenges of encountering pulmonary anatomical variations when performing segmentectomy. Therefore, to further investigate the usefulness of preoperative 3D reconstruction CT in segmentectomy, we will conduct this prospective, multicenter randomized controlled DRIVATS study to compare the use of 3D reconstruction CT with standard chest CT in video-assisted segmentectomy (ClinicalTrials.gov ID: NCT04004494).MethodsThis study began in July 2019 and a total of 190 patients will be accrued from three clinical centers within 4 years. The main inclusion criteria are patients with a single peripheral nodule 0.8-2 cm with at least one of the following requirements: (i) histology of adenocarcinoma in situ; (ii) nodule has ≥50% ground-glass appearance on CT; (iii) radiologic surveillance confirms a long doubling time (≥400 days). Surgical procedures include segmental resection of the lesion and mediastinal lymph node sampling (subsegmental resection or combined subsegmental resection will not be included in this study). The primary endpoint is operative time. The secondary endpoints include incidence of change of surgical plan, intraoperative blood loss, conversion rate, operative accident event, incidence of postoperative complications, postoperative hospital stay, length of hospitalization, duration of chest tube placement, postoperative 30-day mortality, dissection of lymph nodes, overall survival, disease-free survival, preoperative lung function, and postoperative lung function.DiscussionThis multicenter DRIVATS study aims to verify the usefulness of preoperative 3D reconstruction CT compared with standard chest CT in segmentectomy. If successfully completed, this multicenter prospective study will provide a higher level of evidence for the use of 3D reconstruction CT in segmentectomy.

Dataset Information

Three-dimensional reconstruction/personalized three-dimensional printed model for thoracoscopic anatomical partial-lobectomy in stage I lung cancer: a retrospective study.

Publications

Three-dimensional reconstruction/personalized three-dimensional printed model for thoracoscopic anatomical partial-lobectomy in stage I lung cancer: a retrospective study.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets