Dataset Information

Long-Term Cyclic Loading Impact on the Creep Deformation Mechanism in Cohesive Materials.

ABSTRACT: Long-term cyclic loading is observed in a wide range of human activities, as well as in nature, such as in the case of ocean waves. Cyclic loading can lead to ratcheting which is defined as progressive accumulation of plastic deformation in a material. Long-term cyclic loading causes a time effect (creep), which is a secondary compression effect. In this article, we conducted 15 triaxial tests on four types of cohesive materials in undrained conditions to evaluate the damage and failure mechanism. To characterize the strain and pore pressure development, we modified the Yanbu resistance concept. On the basis of the static creep tests, we concluded that the stress paths for undrained creep behavior have to take into account the pore pressure developed during long-term cyclic loading. Pore pressure build-up and plastic strain accumulation during long-term cyclic loading are dependent on the number of loading cycles. Finally, we proposed the failure criterion, which was based on the Modified Cam-Clay constitutive model.

SUBMITTER: Gluchowski A

PROVIDER: S-EPMC7503864 | biostudies-literature | 2020 Sep

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Long-Term Cyclic Loading Impact on the Creep Deformation Mechanism in Cohesive Materials.

Głuchowski Andrzej A Sas Wojciech W

Materials (Basel, Switzerland) 20200903 17

Long-term cyclic loading is observed in a wide range of human activities, as well as in nature, such as in the case of ocean waves. Cyclic loading can lead to ratcheting which is defined as progressive accumulation of plastic deformation in a material. Long-term cyclic loading causes a time effect (creep), which is a secondary compression effect. In this article, we conducted 15 triaxial tests on four types of cohesive materials in undrained conditions to evaluate the damage and failure mechanis ...[more]

PMID: 32899404

Similar Datasets

Project description:Viscoelasticity is a fundamental property of virtually all biological materials, and proteinaceous, fibrous materials that constitute the extracellular matrix (ECM) are no exception. Viscoelasticity may be particularly important in the ECM since cells can apply mechanical stress resulting from cell contractility over very long periods of time. However, measurements of ECM fiber response to long-term constant force loading are scarce, despite the increasing recognition that mechanical strain regulates the biological function of some ECM fibers. We developed a dual micropipette system that applies constant force to single fibers for up to 8?h. We utilized this system to study the time dependent response of fibronectin (Fn) fibers to constant force, as Fn fibers exhibit tremendous extensibility before mechanical failure as well as strain dependent alterations in biological properties. These data demonstrate the Fn fibers continue to stretch under constant force loading for at least 8?h and that this long-term creep results in plastic deformation of Fn fibers, in contrast to elastic deformation of Fn fibers under short-term, but fast loading rate extension. These data demonstrate that physiologically-relevant loading may impart mechanical features to Fn fibers by switching them into an extended state that may have altered biological functions. STATEMENT OF SIGNIFICANCE: Measurements of extracellular matrix (ECM) fiber response to constant force loading are scarce, so we developed a novel technique for applying constant force to single ECM fibers. We used this technique to measure constant force creep of fibronectin fibers since these fibers have been shown to be mechanotransducers whose functions can be altered by mechanical strain. We found that fibronectin fibers creep under constant force loading for the duration of the experiment and that this creep behavior resembles a power law. Furthermore, we found that constant force creep results in plastic deformation of the fibers, which suggests that the mechanobiological switching of fibronectin can only occur once after long-term loading.

Project description:The deformation and fracture characteristics of shale in the Changning-Xingwen region were experimentally studied under triaxial cyclic loading with a controlled pore-water pressure. An RLW-2000M microcomputer-controlled coal-rock rheometer was used in the State key Laboratory of coal mine disaster dynamics and control in Chongqing University. These experimental results have indicated the following. (i) The shale softened after being saturated with water, while its failure strength decreased with the increase of axial strain. (ii) A complete cyclic loading-unloading process can be divided into four stages under the coupling action of axial cyclic loading and pore-water pressure; namely the slow or accelerated increasing of strain in the loading stage, and the slow or accelerated decreasing of strain in the unloading stage. (iii) The axial plastic deformation characteristics were similar when pore-water pressures were set to 2, 6 and 10 MPa. Nevertheless, the shale softened ostensibly and fatigue damage occurred during the circulation process when the pore-water pressure was set to 14 MPa. (iv) It has been observed that the mean strain and strain amplitude under axial cyclic are positively correlated with pore-water pressure, while the elastic modulus is negatively correlated with pore-water pressure. As the cycle progresses, the trends in these parameters vary, which indicates that the deformation and elastic characteristics of shale are controlled by pore-water pressure and cyclic loading conditions. (v) Evidenced via triaxial compression tests, it was predominantly shear failure that occurred in the shale specimens. In addition, axial cyclic loading caused the shale to generate complex secondary fractures, resulting in the specimens cracking along the bedding plane due to the effect of pore-water pressure. This study provides valuable insight into the understanding of the deformation and failure mechanisms of shale under complicated stress conditions.

Dataset Information

Long-Term Cyclic Loading Impact on the Creep Deformation Mechanism in Cohesive Materials.

Publications

Long-Term Cyclic Loading Impact on the Creep Deformation Mechanism in Cohesive Materials.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets