Dataset Information

Influence of temperature on the electrochemical window of boron doped diamond: a comparison of commercially available electrodes.

ABSTRACT: This work compares the electrochemical windows of polished and unpolished boron doped diamond (BDD) electrodes with hydrogen and oxygen terminations at a series of temperatures up to 125 °C. The experiment was run at 5 bar pressure to avoid complications due to bubble formation. An alternative method for determining the electrochemical window is compared to the most commonly used method, which defines the window at an arbitrary current density cut-off (J_cut-off) value. This arbitrary method is heavily influenced by the mass transport of the electrolyte and cannot be used to compare electrodes across literature where different J_cut-off values have been used. A linear fit method is described which is less affected by the experimental conditions in a given measurement system. This enables a more accurate comparison of the relative electrochemical window from various diamond electrode types from reported results. Through comparison of polished and unpolished BDD electrodes, with hydrogen and oxygen surface terminations, it is determined that the electrochemical window of BDD electrodes narrows as temperature increases; activation energies are reported.

SUBMITTER: McLaughlin MHS

PROVIDER: S-EPMC7518440 | biostudies-literature | 2020 Sep

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Influence of temperature on the electrochemical window of boron doped diamond: a comparison of commercially available electrodes.

McLaughlin Maeve H S MHS Corcoran Emma E Pakpour-Tabrizi Alexander C AC de Faria Débora Campos DC Jackman Richard B RB

Scientific reports 20200924 1

This work compares the electrochemical windows of polished and unpolished boron doped diamond (BDD) electrodes with hydrogen and oxygen terminations at a series of temperatures up to 125 °C. The experiment was run at 5 bar pressure to avoid complications due to bubble formation. An alternative method for determining the electrochemical window is compared to the most commonly used method, which defines the window at an arbitrary current density cut-off (J<sub>cut-off</sub>) value. This arbitrary ...[more]

PMID: 32973196

Similar Datasets

Project description:Fabrication of patterned boron-doped diamond (BDD) in an inexpensive and straightforward way is required for a variety of practical applications, including the development of BDD-based electrochemical sensors. This work describes a simplified and novel bottom-up fabrication approach for BDD-based three-electrode sensor chips utilizing direct inkjet printing of diamond nanoparticles on silicon-based substrates. The whole seeding process, accomplished by a commercial research inkjet printer with piezo-driven drop-on-demand printheads, was systematically examined. Optimized and continuous inkjet-printed features were obtained with glycerol-based diamond ink (0.4% vol/wt), silicon substrates pretreated by exposure to oxygen plasma and subsequently to air, and applying a dot density of 750 drops (volume 9 pL) per inch. Next, the dried micropatterned substrate was subjected to a chemical vapor deposition step to grow uniform thin-film BDD, which satisfied the function of both working and counter electrodes. Silver was inkjet-printed to complete the sensor chip with a reference electrode. Scanning electron micrographs showed a closed BDD layer with a typical polycrystalline structure and sharp and well-defined edges. Very good homogeneity in diamond layer composition and a high boron content (∼2 × 1021 atoms cm-3) was confirmed by Raman spectroscopy. Important electrochemical characteristics, including the width of the potential window (2.5 V) and double-layer capacitance (27 μF cm-2), were evaluated by cyclic voltammetry. Fast electron transfer kinetics was recognized for the [Ru(NH3)6]3+/2+ redox marker due to the high doping level, while somewhat hindered kinetics was observed for the surface-sensitive [Fe(CN)6]3-/4- probe. Furthermore, the ability to electrochemically detect organic compounds of different structural motifs, such as glucose, ascorbic acid, uric acid, tyrosine, and dopamine, was successfully verified and compared with commercially available screen-printed BDD electrodes. The newly developed chip-based manufacture method enables the rapid prototyping of different small-scale electrode designs and BDD microstructures, which can lead to enhanced sensor performance with capability of repeated use.

Dataset Information

Influence of temperature on the electrochemical window of boron doped diamond: a comparison of commercially available electrodes.

Publications

Influence of temperature on the electrochemical window of boron doped diamond: a comparison of commercially available electrodes.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets