Browse
Submit Data
Databases
API
Help

Dataset Information

28 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Stable High-Efficiency Two-Dimensional Perovskite Solar Cells Via Bromine Incorporation.

ABSTRACT: Two-dimensional (2D) organic-inorganic perovskites as one of the most important photovoltaic material used in solar cells have attracted remarkable attention. These 2D perovskites exhibit superior environmental stability and wide tunability of their optoelectronic properties. However, their photovoltaic performance is far behind those of traditional three-dimensional (3D) perovskites. In this work, we demonstrate the power conversion efficiency (PCE) of 2D perovskite solar cells (PVSCs) is greatly improved from 3.01% for initial to 12.19% by the incorporation of PbBr₂. The enhanced efficiency is attributed to superior surface quality, enhanced crystallinity, and the resulting reduced trap-state density. Furthermore, PbBr₂ incorporated devices without encapsulation show excellent humidity stability, illumination stability, and thermal stability. This work provides a universal and viable avenue toward efficient and stable 2D PVSCs.

SUBMITTER: Han F

PROVIDER: S-EPMC7530156 | biostudies-literature | 2020 Oct

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Stable High-Efficiency Two-Dimensional Perovskite Solar Cells Via Bromine Incorporation.

Han Feng F Yang Wenyao W Li Hao H Zhu Lei L

Nanoscale research letters 20201001 1

Two-dimensional (2D) organic-inorganic perovskites as one of the most important photovoltaic material used in solar cells have attracted remarkable attention. These 2D perovskites exhibit superior environmental stability and wide tunability of their optoelectronic properties. However, their photovoltaic performance is far behind those of traditional three-dimensional (3D) perovskites. In this work, we demonstrate the power conversion efficiency (PCE) of 2D perovskite solar cells (PVSCs) is great ...[more]

PMID: 33001319

Similar Datasets

Additive Engineering to Grow Micron-Sized Grains for Stable High Efficiency Perovskite Solar Cells.

Project description:A high-quality perovskite photoactive layer plays a crucial role in determining the device performance. An additive engineering strategy is introduced by utilizing different concentrations of N,1-diiodoformamidine (DIFA) in the perovskite precursor solution to essentially achieve high-quality monolayer-like perovskite films with enhanced crystallinity, hydrophobic property, smooth surface, and grain size up to nearly 3 µm, leading to significantly reduced grain boundaries, trap densities, and thus diminished hysteresis in the resultant perovskite solar cells (PSCs). The optimized devices with 2% DIFA additive show the best device performance with a significantly enhanced power conversion efficiency (PCE) of 21.22%, as compared to the control devices with the highest PCE of 19.07%. 2% DIFA modified devices show better stability than the control ones. Overall, the introduction of DIFA additive is demonstrated to be a facile approach to obtain high-efficiency, hysteresis-less, and simultaneously stable PSCs.

| S-EPMC6755530 | biostudies-literature

Acetic Acid Assisted Crystallization Strategy for High Efficiency and Long-Term Stable Perovskite Solar Cell.

Project description:Improving the quality of perovskite poly-crystalline film is essential for the performance of associated solar cells approaching their theoretical limit efficiency. Pinholes, unwanted defects, and nonperovskite phase can be easily generated during film formation, hampering device performance and stability. Here, a simple method is introduced to prepare perovskite film with excellent optoelectronic property by using acetic acid (Ac) as an antisolvent to control perovskite crystallization. Results from a variety of characterizations suggest that the small amount of Ac not only reduces the perovskite film roughness and residual PbI2 but also generates a passivation effect from the electron-rich carbonyl group (C=O) in Ac. The best devices produce a PCE of 22.0% for Cs0.05FA0.80MA0.15Pb(I0.85Br0.15)3 and 23.0% for Cs0.05FA0.90MA0.05Pb(I0.95Br0.05)3 on 0.159 cm2 with negligible hysteresis. This further improves device stability producing a cell that maintained 96% of its initial efficiency after 2400 h storage in ambient environment (with controlled relative humidity (RH) <30%) without any encapsulation.

| S-EPMC7055551 | biostudies-literature

A Novel Organic Dopant for Spiro-OMeTAD in High-Efficiency and Stable Perovskite Solar Cells.

Project description:Perovskite solar cells (PSCs) have achieved excellent power conversion efficiencies (PCEs); however, there still exist some major challenges on device stability due to hydrophilic bis(trifluoromethane)sulfonimide lithium (Li-TFSI), which is commonly introduced as a p-dopant to increase the hole mobility and conductivity of 2,2',7,7'-tetrakis-(N,N-di-4-methoxyphenylamino)-9,9'-spirobifluorene (spiro-OMeTAD) hole-transporting materials (HTMs). Ion migration, corrosiveness, and hygroscopicity induced by the additive Li-TFSI are detrimental to the device stability, which significantly hinders further commercialization of PSCs. Herein, a hydrophobic organic ionic compound, trityltetra(pentafluorophenyl)borate (TPP), is explored as a novel efficient and stable alternative p-dopant, avoiding the long-term aging process to improve the conductivity of spiro-OMeTAD. As a result, the champion efficiency of TPP-based devices delivers performance up to 23.03%, which is higher than that of the Li-TFSI-based devices (22.39%). In addition, the TPP-based devices also exhibit higher average PCE values. The excellent performance with TPP may be associated with the higher work function of doped spiro-OMeTAD and a better alignment of energy levels with the valence band of perovskite, which substantially accelerate interfacial carrier transportation and minimize the open-circuit voltage (V oc) loss of PSCs. More importantly, the un-encapsulated TPP-doped devices also display much superior operational stability under maximum power point (MPP) tracking with continuous light illumination in an ambient humid environment, which maintained 96-97% of the initial PCE over 1,100 h outputting. Thus, this work will open up new possibilities for hydrophilic Li-TFSI dopant replacements.

| S-EPMC9357902 | biostudies-literature

Planar Metasurfaces Enable High-Efficiency Colored Perovskite Solar Cells.

Project description:The achievement of perfect light absorption in ultrathin semiconductor materials is not only a long-standing goal, but also a critical challenge for solar energy applications, and thus requires a redesigned strategy. Here, a general strategy is demonstrated both theoretically and experimentally to create a planar metasurface absorber comprising a 1D ultrathin planar semiconductor film (replacing the 2D array of subwavelength elements in classical metasurfaces), a transparent spacer, and a metallic back reflector. Guided by derived formulisms, a new type of macroscopic planar metasurface absorber is experimentally demonstrated with light near-perfectly and exclusively absorbed by the ultrathin semiconductor film. To demonstrate the power and simplicity of this strategy, a prototype of a planar metasurface solar cell is experimentally demonstrated. Furthermore, the device model predicts that a colored planar metasurface perovskite solar cell can maintain 75% of the efficiency of its black counterpart despite the use of a perovskite film that is one order of magnitude thinner. The displayed cell colors have high purities comparable to those of state-of-the-art color filters, and are insensitive to viewing angles up to 60°. The general theoretical framework in conjunction with experimental demonstrations lays the foundation for designing miniaturized, planar, and multifunctional solar cells and optoelectronic devices.

| S-EPMC6193155 | biostudies-literature

Highly efficient and stable perovskite solar cells enabled by low-dimensional perovskitoids.

Project description:Deep traps originated from the defects formed at the surfaces and grain boundaries of the perovskite absorbers during their lattice assembly are the main reasons that cause nonradiative recombination and material degradation, which notably affect efficiency and stability of perovskite solar cells (PSCs). Here, we demonstrate the substantially improved PSC performance by capping the photoactive layer with low-dimensional (LD) perovskitoids. The undercoordinated Pb ions and metallic Pb at the surfaces of the three-dimensional (3D) perovskite are effectively passivated via the Pb-I bonding from the favorably lattice-matched 3D/LD interface. The good stability and hydrophobicity of the LD (0D and 1D) perovskitoids allow excellent protection of the 3D active layer under severe environmental conditions. The PSC exhibits a power conversion efficiency of 24.18%, reproduced in an accredited independent photovoltaic testing laboratory. The unencapsulated device maintains 90% of its initial efficiency after 800 hours of continuous illumination under maximum power point operating conditions.

| S-EPMC8791463 | biostudies-literature

Enhanced electronic properties in mesoporous TiO2 via lithium doping for high-efficiency perovskite solar cells.

Project description:Perovskite solar cells are one of the most promising photovoltaic technologies with their extraordinary progress in efficiency and the simple processes required to produce them. However, the frequent presence of a pronounced hysteresis in the current voltage characteristic of these devices arises concerns on the intrinsic stability of organo-metal halides, challenging the reliability of technology itself. Here, we show that n-doping of mesoporous TiO2 is accomplished by facile post treatment of the films with lithium salts. We demonstrate that the Li-doped TiO2 electrodes exhibit superior electronic properties, by reducing electronic trap states enabling faster electron transport. Perovskite solar cells prepared using the Li-doped films as scaffold to host the CH3NH3PbI3 light harvester produce substantially higher performances compared with undoped electrodes, improving the power conversion efficiency from 17 to over 19% with negligible hysteretic behaviour (lower than 0.3%).

| S-EPMC4735553 | biostudies-literature

Perfection of Perovskite Grain Boundary Passivation by Rhodium Incorporation for Efficient and Stable Solar Cells.

Project description:Organic cation and halide anion defects are omnipresent in the perovskite films, which will destroy perovskite electronic structure and downgrade the properties of devices. Defect passivation in halide perovskites is crucial to the application of solar cells. Herein, tiny amounts of trivalent rhodium ion incorporation can help the nucleation of perovskite grain and passivate the defects in the grain boundaries, which can improve efficiency and stability of perovskite solar cells. Through first-principle calculations, rhodium ion incorporation into the perovskite structure can induce ordered arrangement and tune bandgap. In experiment, rhodium ion incorporation with perovskite can contribute to preparing larger crystalline and uniform film, reducing trap-state density and enlarging charge carrier lifetime. After optimizing the content of 1% rhodium, the devices achieved an efficiency up to 20.71% without obvious hysteresis, from 19.09% of that pristine perovskite. In addition, the unencapsulated solar cells maintain 92% of its initial efficiency after 500 h in dry air. This work highlights the advantages of trivalent rhodium ion incorporation in the characteristics of perovskite solar cells, which will promote the future industrial application.

| S-EPMC7770677 | biostudies-literature

Denatured M13 Bacteriophage-Templated Perovskite Solar Cells Exhibiting High Efficiency.

Project description:The M13 bacteriophage, a nature-inspired environmentally friendly biomaterial, is used as a perovskite crystal growth template and a grain boundary passivator in perovskite solar cells. The amino groups and carboxyl groups of amino acids on the M13 bacteriophage surface function as Lewis bases, interacting with the perovskite materials. The M13 bacteriophage-added perovskite films show a larger grain size and reduced trap-sites compared with the reference perovskite films. In addition, the existence of the M13 bacteriophage induces light scattering effect, which enhances the light absorption particularly in the long-wavelength region around 825 nm. Both the passivation effect of the M13 bacteriophage coordinating to the perovskite defect sites and the light scattering effect intensify when the M13 virus-added perovskite precursor solution is heated at 90 °C prior to the film formation. Heating the solution denatures the M13 bacteriophage by breaking their inter- and intra-molecular bondings. The denatured M13 bacteriophage-added perovskite solar cells exhibit an efficiency of 20.1% while the reference devices give an efficiency of 17.8%. The great improvement in efficiency comes from all of the three photovoltaic parameters, namely short-circuit current, open-circuit voltage, and fill factor, which correspond to the perovskite grain size, trap-site passivation, and charge transport, respectively.

| S-EPMC7578877 | biostudies-literature

High-efficiency robust perovskite solar cells on ultrathin flexible substrates.

Project description:Wide applications of personal consumer electronics have triggered tremendous need for portable power sources featuring light-weight and mechanical flexibility. Perovskite solar cells offer a compelling combination of low-cost and high device performance. Here we demonstrate high-performance planar heterojunction perovskite solar cells constructed on highly flexible and ultrathin silver-mesh/conducting polymer substrates. The device performance is comparable to that of their counterparts on rigid glass/indium tin oxide substrates, reaching a power conversion efficiency of 14.0%, while the specific power (the ratio of power to device weight) reaches 1.96?kW?kg(-1), given the fact that the device is constructed on a 57-?m-thick polyethylene terephthalate based substrate. The flexible device also demonstrates excellent robustness against mechanical deformation, retaining >95% of its original efficiency after 5,000 times fully bending. Our results confirmed that perovskite thin films are fully compatible with our flexible substrates, and are thus promising for future applications in flexible and bendable solar cells.

| S-EPMC4729901 | biostudies-other

High efficiency perovskite quantum dot solar cells with charge separating heterostructure.

Project description:Metal halide perovskite semiconductors possess outstanding characteristics for optoelectronic applications including but not limited to photovoltaics. Low-dimensional and nanostructured motifs impart added functionality which can be exploited further. Moreover, wider cation composition tunability and tunable surface ligand properties of colloidal quantum dot (QD) perovskites now enable unprecedented device architectures which differ from thin-film perovskites fabricated from solvated molecular precursors. Here, using layer-by-layer deposition of perovskite QDs, we demonstrate solar cells with abrupt compositional changes throughout the perovskite film. We utilize this ability to abruptly control composition to create an internal heterojunction that facilitates charge separation at the internal interface leading to improved photocarrier harvesting. We show how the photovoltaic performance depends upon the heterojunction position, as well as the composition of each component, and we describe an architecture that greatly improves the performance of perovskite QD photovoltaics.

| S-EPMC6599010 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data