Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Experimental measurements and modelling of viscosity and density of calcium and potassium chlorides ternary solutions

ABSTRACT: Measured viscosity and density data for ternary aqueous solutions of CaCl2 and KCl are presented at temperatures between 293 and 323 K with 5 K increment. A modified Jones–Dole was introduced by adding extra terms and proved to be suitable for modelling of the viscosity data. Goldsack and Franchetto, Hu and Exponential models are used to correlate the viscosity data, too. Al models are correlated as a function of temperature and concentration. All models had successfully predicted the viscosity with high precision reaching a maximum average absolute deviation (AAD) of less than 2.3%. The modified Jones–Dole showed the best results among other models. Viscosity of the ternary solution is higher than the viscosity of water by about 15% at low concentrations and reaches about 270% at the highest concentrations. The amount of CaCl2 has more significant effect on the ternary mixture viscosity compared to KCl. This has created difficulty in measuring the viscosity and consequently the challenge in finding the different models parameters. Ternary solution densities were successfully correlate with Kumar’s model with AAD of less than 0.4%. Comparison of the ternary solution density and viscosity with the few available data literature showed a good agreement.

SUBMITTER: Arshad M

PROVIDER: S-EPMC7530761 | biostudies-literature | 2020 Jan

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Laboratory measurements of viscosity, density, and bulk contact angle on marble and soda lime glass for three naphthenic acid + <i>n</i>-decane solutions.

Project description:This paper presents static oil/brine contact angles measured using the sessile drop method on soda lime glass and polished marble. Pure n-decane and three 66 mM naphthenic acid solutions in n-decane were considered as model oils. Selected naphthenic acids were: cyclohexanecarboxylic acid (CHCA), cyclohexanebutyric acid (CHBA), and cyclohexanepentanoic acid (CHPA); all oils were dyed with Oil Red O (ORO) at a concentration of 0.9 mM. Also presented are complementary density and viscosity measurements by rotational viscometry at selected temperatures ranging from T = 16.00-28.00 °C. For the application of the data to interpret microfluidic experiments, see Tanino et al. [1] and Christensen et al. [2].

| S-EPMC6536672 | biostudies-literature

Investigations of the Density and Solubility of Ammonium Perrhenate and Potassium Perrhenate Aqueous Solutions.

Project description:Rhenium is largely used as an additive to nickel- and cobalt-based superalloys. Their resistance to temperature and corrosion makes them suitable for the production of turbines in civil and military aviation, safety valves in drilling platforms, and tools working at temperatures exceeding 1000 °C. The purity of commercial rhenium salts is highly important. Potassium, which is a particularly undesirable element, can be removed by recrystallization. Therefore, it is crucial to possess detailed knowledge concerning process parameters including the dissolved solid concentration and the resulting saturation temperature. This can be achieved using simple densimetric methods. Due to the fact that data concerning the physicochemical properties of ammonium perrhenate (APR) NH4ReO4 and potassium perrhenate (PPR) KReO4 are imprecise or unavailable in the scientific literature, the goal of this study is to present experimental data including the solubility and density of water solutions of both salts. In the experiments, a densimeter with a vibrating cell was used to precisely determine the densities. Although the investigated solutions did not fit into the earlier proposed mathematical model, some crucial conclusions could still be made based on the results.

| S-EPMC10420235 | biostudies-literature

Experimental and Theoretical Study on Theobromine Solubility Enhancement in Binary Aqueous Solutions and Ternary Designed Solvents.

Project description:The solubility of theobromine was studied both experimentally and theoretically. The solubility was determined spectrophotometrically at 25 °C in neat organic solvents, aqueous binary mixtures, Natural Deep Eutectic Solvents (NADES) and ternary NADES mixtures with water. It was found that addition of water in unimolar proportions with some organic solvents increases theobromine solubility compared to neat solvents. Additionally, using NADES results in a solubility increase of the studied compound not only in relation to water but also DMSO. The addition of water (0.2 molar fraction) to NADES is responsible for an even larger increase of solubility. The measured solubilities were interpreted in terms of three theoretical frameworks. The first one-belonging to the set of data reduction techniques-proved to be very efficient in quantitative back-computations of excess solubility of theobromine in all studied systems. The default approach utilizing the well-recognized COSMO-RS (Conductor-like Screening Model for Real Solvents) framework offered at most a qualitative solubility description. The extended search for possible contacts provided evidence for the existence of many intermolecular complexes that alter the electron density of the solute molecule, thus influencing solubility computations. Taking into account such intermolecular contacts by using the COSMO-RS-DARE (Conductor-like Screening Model for Realistic Solvation-Dimerization, Aggregation, and Reaction Extension) framework seriously increased the accuracy of solubility computations.

| S-EPMC8401494 | biostudies-literature

Experimental measurements of the viscosity and melt structure of alkali basalts at high pressure and temperature.

Project description:Volcanic eruptions are shallow phenomena that represent the final stage of density- and viscosity- driven processes of melt migration from source rocks at upper mantle depths. In this experimental study, we investigated the effect of pressure (0.7-7.0 GPa) and temperature (1335-2000 °C) on the viscosity and the atomic melt structure of a synthetic anhydrous primitive alkaline basalt, an analogue of the pre-eruptive magma that likely feeds the Campi Flegrei Volcanic District at present day. Obtained viscosities (0.5-3.0 Pa s), mobility (0.1-0.4 g cm3 Pa-1 s-1) and ascent velocity (1.5-6.0 m yr-1) are presented to support geochemical and geophysical observations of Campi Flegrei as a critical volcanic district currently undergoing gradual magma recharge at depth.

| S-EPMC8850584 | biostudies-literature

Stability of numerous novel potassium chlorides at high pressure.

Project description:K-Cl is a simple system displaying all four main types of bonding, as it contains (i) metallic potassium, (ii) elemental chlorine made of covalently bonded Cl2 molecules held together by van der Waals forces, and (iii) an archetypal ionic compound KCl. The charge balance rule, assigning classical charges of "+1" to K and "-1" to Cl, predicts that no compounds other than KCl are possible. However, our quantum-mechanical variable-composition evolutionary simulations predict an extremely complex phase diagram, with new thermodynamically stable compounds K3Cl, K2Cl, K3Cl2, K4Cl3, K5Cl4, K3Cl5, KCl3 and KCl7. Of particular interest are 2D-metallic homologs Kn+1Cln, the presence of positively charged Cl atoms in KCl7, and the predicted stability of KCl3 already at nearly ambient pressures at zero Kelvin. We have synthesized cubic -KCl3 at 40-70 GPa and trigonal -KCl3 at 20-40 GPa in a laser-heated diamond anvil cell (DAC) at temperature exceeding 2000 K from KCl and Cl2. These phases were identified using in situ synchrotron X-ray diffraction and Raman spectroscopy. Upon unloading to 10 GPa, -KCl3 transforms to a yet unknown structure before final decomposition to KCl and Cl2 at near-ambient conditions.

| S-EPMC4876327 | biostudies-literature

Suzuki coupling of potassium cyclopropyl- and alkoxymethyltrifluoroborates with benzyl chlorides.

Project description:Efficient Csp(3)-Csp(3) Suzuki couplings have been developed with both potassium cyclopropyl- and alkoxymethyltrifluoroborates. Moderate to good yields have been achieved in the cross-coupling of potassium cyclopropyltrifluoroborate with benzyl chlorides possessing electron-donating or electron-withdrawing substituents. Benzyl chloride was also successfully cross-coupled to potassium alkoxymethyltrifluoroborates derived from primary, secondary, and tertiary alcohols.

| S-EPMC3306449 | biostudies-literature

Macroscopic Viscosity of Polymer Solutions from the Nanoscale Analysis.

Project description:The effective viscosity in polymer solutions probed by diffusion of nanoparticles depends on their size. It is a well-defined function of the probe size, the radius of gyration, mesh size (correlation length), activation energy, and its parameters. As the nanoparticle's size exceeds the radius of gyration of polymer coils, the effective viscosity approaches its macroscopic limiting value. Here, we apply the equation for effective viscosity in the macroscopic limit to the following polymer solutions: hydroxypropyl cellulose (HPC) in water, polymethylmethacrylate (PMMA) in toluene, and polyacrylonitrile (PAN) in dimethyl sulfoxide (DMSO). We compare them with previous data for PEG/PEO in water and PDMS in ethyl acetate. We determine polymer parameters from the measurements of the macroscopic viscosity in a wide range of average polymer molecular weights (24-300 kg/mol), temperatures (283-303 K), and concentrations (0.005-1.000 g/cm3). In addition, the polydispersity of polymers is taken into account in the appropriate molecular weight averaging functions. We provide the model applicable for the study of nanoscale probe diffusion in polymer solutions and macroscopic characterization of different polymer materials via rheological measurements.

| S-EPMC8159165 | biostudies-literature

Prediction of Antibody Viscosity from Dilute Solution Measurements.

Project description:The high antibody doses required to achieve a therapeutic effect often necessitate high-concentration products that can lead to challenging viscosity issues in production and delivery. Predicting antibody viscosity in early development can play a pivotal role in reducing late-stage development costs. In recent years, numerous efforts have been made to predict antibody viscosity through dilute solution measurements. A key finding is that the entanglement of long, flexible complexes contributes to the sharp rise in antibody viscosity at the required dosing. This entanglement model establishes a connection between the two-body binding affinity and the many-body viscosity. Exploiting this insight, this study connects dilute solution measurements of self-association to high-concentration viscosity profiles to quantify the relationship between these regimes. The resulting model has exhibited success in predicting viscosity at high concentrations (around 150 mg/mL) from dilute solution measurements, with only a few outliers remaining. Our physics-based approach provides an understanding of fundamental physics, interpretable connections to experimental data, the potential to extrapolate beyond training conditions, and the capacity to effectively explain the physical mechanics behind these outliers. Conducting hypothesis-driven experiments that specifically target the viscosity and relaxation mechanisms of outlier molecules may allow us to unravel the intricacies of their behavior and, in turn, enhance the performance of our model.

| S-EPMC10740665 | biostudies-literature

Preparation of potassium alkoxymethyltrifluoroborates and their cross-coupling with aryl chlorides.

Project description:A wide variety of alkoxymethyltrifluoroborate substrates were prepared via SN2 displacement of potassium bromomethyltrifluoroborate with various alkoxides in excellent yields. These alkoxymethyltrifluoroborates were effectively cross-coupled with several aryl chlorides. This method provides a unique dissonant disconnect that allows greater flexibility in the design of new and improved synthetic pathways.

| S-EPMC4470619 | biostudies-literature

Suzuki-Miyaura cross-coupling of potassium dioxolanylethyltrifluoroborate and aryl/heteroaryl chlorides.

Project description:A robust and efficient protocol for the introduction of the dioxolanylethyl moiety onto various aryl and heteroaryl halides has been developed, providing cross-coupling yields up to 93%. Copper-catalyzed borylation of 2-(2-bromoethyl)-1,3-dioxolane with bis(pinacolato)diboron followed by treatment with potassium bifluoride provides the key organotrifluoroborate reagent.

| S-EPMC3663905 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data