Dataset Information

Graphitic mesoporous carbon-silica composites from low-value sugarcane by-products for the removal of toxic dyes from wastewaters.

ABSTRACT: Highly porous carbon-silica composites (CSC) were prepared for the first time through a simple wet impregnation process and subsequent pyrolysis of low-value sugarcane by-products, namely molasses. These CSC materials demonstrate a distinct range of functionalities, which significantly differ from similar materials published in the literature. Importantly, the carbon-silica composites prepared at 800°C exhibited exceptional adsorption capacities for the azo-dye congo red (445 mg g-1), due to the graphitic carbon coating and unique functionality including C-O-C within the porous structure. Congo red adsorption capacity of the highly mesoporous graphitic carbon-silica composites significantly exceeds that of commercial activated carbon and silica, these carbon-silica composites therefore represent an effective step towards the development of porous bio-derived adsorbent for remediation of dye wastewaters. Both the porous properties (surface area and pore size distribution) and the functionality of the carbon coating were dependent on the temperature of preparation. The sustainable synthetic methods employed led to a versatile material that inherited the mesoporosity characteristics from the parent silica, demonstrating mesoporous volumes greater than 90% (as calculated from the total pore volume). Adsorption on the 800°C prepared carbon-silica composites demonstrated an excellent fit with the Langmuir isotherm and the pseudo-first-order kinetic model.

SUBMITTER: Janekarn I

PROVIDER: S-EPMC7540760 | biostudies-literature | 2020 Sep

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Graphitic mesoporous carbon-silica composites from low-value sugarcane by-products for the removal of toxic dyes from wastewaters.

Janekarn Intuorn I Hunt Andrew J AJ Ngernyen Yuvarat Y Youngme Sujittra S Supanchaiyamat Nontipa N

Royal Society open science 20200909 9

Highly porous carbon-silica composites (CSC) were prepared for the first time through a simple wet impregnation process and subsequent pyrolysis of low-value sugarcane by-products, namely molasses. These CSC materials demonstrate a distinct range of functionalities, which significantly differ from similar materials published in the literature. Importantly, the carbon-silica composites prepared at 800°C exhibited exceptional adsorption capacities for the azo-dye congo red (445 mg g<sup>-1</sup>), ...[more]

PMID: 33047018

Similar Datasets

Project description:Carbon dots (CDs) and graphitic carbon nitride (g-C3N4) composites (CD/g-C3N4) were successfully synthesized by a hydrothermal method using urea and sugarcane juice as starting materials. The chemical composition, morphological structure and optical properties of the composites and CDs were characterized using various spectroscopic techniques as well as transmission electron microscopy. X-ray photoelectron spectroscopy (XPS) results revealed new signals for carbonyl and carboxyl groups originating from the CDs in CD/g-C3N4 composites while X-ray diffraction (XRD) results showed distortion of the host matrix after incorporating CDs into g-C3N4. Both analyses signified the interaction between g-C3N4 and CDs. The photoluminescence (PL) analysis indicated that the presence of too many CDs will create trap states at the CD/g-C3N4 interface, decelerating the electron (e-) transport. However, the CD/g-C3N4(0.5) composite with the highest coverage of CDs still achieved the best bisphenol A (BPA) degradation rate at 3.87 times higher than that of g-C3N4. Hence, the charge separation efficiency should not be one of the main factors responsible for the enhancement of the photocatalytic activity of CD/g-C3N4. Instead, the light absorption capability was the dominant factor since the photoreactivity correlated well with the ultraviolet-visible diffuse reflectance spectra (UV-vis DRS) results. Although the CDs did not display upconversion photoluminescence (UCPL) properties, the ?-conjugated CDs served as a photosensitizer (like organic dyes) to sensitize g-C3N4 and injected electrons to the conduction band (CB) of g-C3N4, resulting in the extended absorption spectrum from the visible to the near-infrared (NIR) region. This extended spectral absorption allows for the generation of more electrons for the enhancement of BPA degradation. It was determined that the reactive radical species responsible for the photocatalytic activity were the superoxide anion radical (O2•-) and holes (h+) after performing multiple scavenging tests.

Project description:Porous coordination polymers have received intensive attention for pollution abatement, such as dye removal, because of their high porosity and specific surface areas. However, the commonly used water-stable porous coordination polymers are microporous and synthesized within organic solvents, which deters seriously their widespread application. In this report, we developed a facile strategy for the synthesis of mesoporous Zr-based coordination polymer (Zr-BDC-CP) within aqueous solutions. The morphology and structure of Zr-BDC-CP were characterized with scanning electron microscopy, powder X-ray diffraction, and Fourier transform infrared spectroscopy. Pore size distribution analysis confirms that the as-synthesized material is mesoporous, which allows the efficient adsorption of methylene blue, 2.6 times higher than that of the microporous coordination polymer, UiO-66. The decolorization ratio can reach higher than 93.5% in the range of 10 and 400 mg/L for methylene blue solutions. This Zr-based coordination polymer shows wonderful pH stability, where no significant loss of adsorption capacities was observed between pH values of 3 and 11. The simulation of adsorption isotherm indicates that the Freundlich model can fit the adsorption isotherm very well, which reflects that the surface of adsorbents is inhomogeneous. Fitting of kinetic curves shows that the dye adsorption by Zr-BDC-CP follows the pseudo-second-order model, which confirms that the rate-determining step may be a chemisorption process involving valence forces because of the defects within the frameworks of the mesoporous coordination polymer. Zr-BDC-CP also shows desirable recyclability without significant capacity loss. This work presents a facile and sustainable method for the preparation of mesoporous Zr-based coordination polymer for dye removal with excellent stability and recyclability, which could further push the porous coordination polymers for application in the areas of pollution abatement.

Dataset Information

Graphitic mesoporous carbon-silica composites from low-value sugarcane by-products for the removal of toxic dyes from wastewaters.

Publications

Graphitic mesoporous carbon-silica composites from low-value sugarcane by-products for the removal of toxic dyes from wastewaters.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets