Exploring the SARS-CoV-2 structural proteins for multi-epitope vaccine development: an in-silico approach.
Ontology highlight
ABSTRACT: Introduction
The ongoing life-threatening pandemic of coronavirus disease 2019 (COVID-19) has extensively affected the world. During this global health crisis, it is fundamentally crucial to find strategies to combat SARS-CoV-2. Despite several efforts in this direction and continuing clinical trials, no vaccine has been approved for it yet.Methods
To find a preventive measure, we have computationally designed a multi-epitopic subunit vaccine using immuno-informatic approaches.Results
The structural proteins of SARS-CoV-2 involved in its survival and pathogenicity were used to predict antigenic epitopes. The antigenic epitopes were capable of eliciting a strong humoral as well as cell-mediated immune response, our predictions suggest. The final vaccine was constructed by joining the all epitopes with specific linkers and to enhance their stability and immunogenicity. The physicochemical property of the vaccine was assessed. The vaccine 3D structure prediction and validation were done and docked with the human TLR-3 receptor. Furthermore, molecular dynamics simulations of the vaccine-TLR-3 receptor complex are employed to assess its dynamic motions and binding stability in-silico.Conclusion
Based on this study, we strongly suggest synthesizing this vaccine, which further can be tested in-vitro and in-vivo to check its potency in a cure for COVID-19.
SUBMITTER: Kumar A
PROVIDER: S-EPMC7544969 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:In December 2019, a new virus called SARS-CoV-2 was reported in China and quickly spread to other parts of the world. The development of SARS-COV-2 vaccines has recently received much attention from numerous researchers. The present study aims to design an effective multi-epitope vaccine against SARS-COV-2 using the reverse vaccinology method. In this regard, structural proteins from SARS-COV-2, including the spike (S), envelope (E), membrane (M), and nucleocapsid (N) proteins, were selected as target antigens for epitope prediction. A total of five helper T lymphocytes (HTL) and five cytotoxic T lymphocytes (CTL) epitopes were selected after screening the predicted epitopes for antigenicity, allergenicity, and toxicity. Subsequently, the selected HTL and CTL epitopes were fused via flexible linkers. Next, the cholera toxin B-subunit (CTxB) as an adjuvant was linked to the N-terminal of the chimeric structure. The proposed vaccine was analyzed for the properties of physicochemical, antigenicity, and allergenicity. The 3D model of the vaccine construct was predicted and docked with the Toll-like receptor 4 (TLR4). The molecular dynamics (MD) simulation was performed to evaluate the stable interactions between the vaccine construct and TLR4. The immune simulation was also conducted to explore the immune responses induced by the vaccine. Finally, in silico cloning of the vaccine construct into the pET-28 (+) vector was conducted. The results obtained from all bioinformatics analysis stages were satisfactory; however, in vitro and in vivo tests are essential to validate these results.
| S-EPMC8055380 | biostudies-literature
Project description:SARS-CoV-2, the causative agent behind the ongoing pandemic exhibits an enhanced potential for infection when compared to its related family members- the SARS-CoV and MERS-CoV; which have caused similar disease outbreaks in the past. The severity of the global health burden, increasing mortality rate and the emergent economic crisis urgently demands the development of next generation vaccines. Amongst such emergent next generation vaccines are the multi-epitope subunit vaccines, which hold promise in combating deadly pathogens. In this study we have exploited immunoinformatics applications to delineate a vaccine candidate possessing multiple B and T cells epitopes by utilizing the SARS-CoV-2 non structural and structural proteins. The antigenicity potential, safety, structural stability and the production feasibility of the designed construct was evaluated computationally. Furthermore, due to the known role of human TLR-3 immune receptor in viral sensing, which facilitates host cells activation for an immune response, the vaccine construct was examined for its binding efficiency using molecular docking and molecular dynamics simulation studies, which resulted in strong and stable interactions. Finally, the immune simulation studies suggested an effective immune response on vaccine administration. Overall, the immunoinformatics analysis advocates that the proposed vaccine candidate is safe and immunogenic and therefore can be pushed as a lead for in vitro and in vivo investigations.Communicated by Ramaswamy H. Sarma.
| S-EPMC8171004 | biostudies-literature
Project description:The rampant spread of COVID-19, an infectious disease caused by SARS-CoV-2, all over the world has led to over millions of deaths, and devastated the social, financial and political entities around the world. Without an existing effective medical therapy, vaccines are urgently needed to avoid the spread of this disease. In this study, we propose an in silico deep learning approach for prediction and design of a multi-epitope vaccine (DeepVacPred). By combining the in silico immunoinformatics and deep neural network strategies, the DeepVacPred computational framework directly predicts 26 potential vaccine subunits from the available SARS-CoV-2 spike protein sequence. We further use in silico methods to investigate the linear B-cell epitopes, Cytotoxic T Lymphocytes (CTL) epitopes, Helper T Lymphocytes (HTL) epitopes in the 26 subunit candidates and identify the best 11 of them to construct a multi-epitope vaccine for SARS-CoV-2 virus. The human population coverage, antigenicity, allergenicity, toxicity, physicochemical properties and secondary structure of the designed vaccine are evaluated via state-of-the-art bioinformatic approaches, showing good quality of the designed vaccine. The 3D structure of the designed vaccine is predicted, refined and validated by in silico tools. Finally, we optimize and insert the codon sequence into a plasmid to ensure the cloning and expression efficiency. In conclusion, this proposed artificial intelligence (AI) based vaccine discovery framework accelerates the vaccine design process and constructs a 694aa multi-epitope vaccine containing 16 B-cell epitopes, 82 CTL epitopes and 89 HTL epitopes, which is promising to fight the SARS-CoV-2 viral infection and can be further evaluated in clinical studies. Moreover, we trace the RNA mutations of the SARS-CoV-2 and ensure that the designed vaccine can tackle the recent RNA mutations of the virus.
| S-EPMC7865008 | biostudies-literature
Project description:Severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) has shown rapid global spread and has resulted in a significant death toll worldwide. In this study, we aimed to design a multi-epitope vaccine against SARS-CoV-2 based on structural proteins S, M, N, and E. We identified B- and T-cell epitopes and then the antigenicity, toxicity, allergenicity, and similarity of predicted epitopes were analyzed. T-cell epitopes were docked with corresponding HLA alleles. Consequently, the selected T- and B-cell epitopes were included in the final construct. All selected epitopes were connected with different linkers and flagellin and pan-HLA DR binding epitopes (PADRE) as an adjuvant were used in the vaccine construct. Furthermore, molecular docking was used to evaluate the complex between the final vaccine construct and two alleles, HLA-A*02:01 and HLA-DRB1*01:01. Finally, codons were optimized for in silico cloning into pET28a(+) vector using SnapGene. The final vaccine construct comprised 11 CTL, HTL, and B-cell epitopes corresponding to 394 amino acid residues. In silico evaluation showed that the designed vaccine might potentially promote an immune response. Further in vivo preclinical and clinical testing is required to determine the safety and efficacy of the designed vaccine.
| S-EPMC9880719 | biostudies-literature
Project description:The novel Corona Virus Disease 2019 (COVID-19) pandemic has set the fatality rates ablaze across the world. So, to combat this disease, we have designed a multi-epitope vaccine from various proteins of Severe Acute Respiratory Syndrome Corona virus 2 (SARS-CoV-2) with an immuno-informatics approach, validated in silico to be stable, non-allergic and antigenic. Cytotoxic T-cell, helper T-cell, and B-cell epitopes were computationally predicted from six conserved protein sequences among four viral strains isolated across the world. The T-cell epitopes, overlapping with the B-cell epitopes, were included in the vaccine construct to assure the humoral and cell-mediated immune response. The beta-subunit of cholera toxin was added as an adjuvant at the N-terminal of the construct to increase immunogenicity. Interferon-gamma inducing epitopes were even predicted in the vaccine. Molecular docking and binding energetics studies revealed strong interactions of the vaccine with immune-stimulatory toll-like receptors (TLR) -2, 3, 4. Molecular dynamics simulation of the vaccine ensured in vivo stability in the biological system. The immune simulation of vaccine evinced elevated immune response. The efficient translation of the vaccine in an expression vector was assured utilizing in silico cloning approach. Certainly, such a vaccine construct could reliably be effective against COVID-19.
| S-EPMC7386484 | biostudies-literature
Project description:Ongoing COVID-19 outbreak has raised a drastic challenge to global public health security. Most of the patients with COVID-19 suffer from mild flu-like illnesses such as cold and fever; however, few percentages of the patients progress from severe illness to death, mostly in an immunocompromised individual. The causative agent of COVID-19 is an RNA virus known as severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2). Despite these debilitating conditions, no medication to stop the disease progression or vaccination is available till now. Therefore, we aimed to formulate a multi-epitope vaccine against SARS-CoV-2 by utilizing an immunoinformatics approach. For this purpose, we used the SARS-CoV-2 spike glycoprotein to determine the immunodominant T- and B-cell epitopes. After rigorous assessment, we designed a vaccine construct using four potential epitopes from each of the three epitope classes such as cytotoxic T-lymphocytes, helper T-lymphocyte, and linear B-lymphocyte epitopes. The designed vaccine was antigenic, immunogenic, and non-allergenic with suitable physicochemical properties and has higher solubility. More importantly, the predicted vaccine structure was similar to the native protein. Further investigations indicated a strong and stable binding interaction between the vaccine and the toll-like receptor (TLR4). Strong binding stability and structural compactness were also evident in molecular dynamics simulation. Furthermore, the computer-generated immune simulation showed that the vaccine could trigger real-life-like immune responses upon administration into humans. Finally, codon optimization based on Escherichia coli K12 resulted in optimal GC content and higher CAI value followed by incorporating it into the cloning vector pET28+(a). Overall, these results suggest that the designed peptide vaccine can serve as an excellent prophylactic candidate against SARS-CoV-2.Communicated by Ramaswamy H. Sarma.
| S-EPMC7441805 | biostudies-literature
Project description:Through 4 June 2021, COVID-19 has caused over 172.84 million cases of infection and 3.71 million deaths worldwide. Due to its rapid dissemination and high mutation rate, it is essential to develop a vaccine harboring multiple epitopes and efficacious against multiple variants to prevent the immune escape of SARS-CoV-2. An in silico approach based on the viral genome was applied to identify 19 high-immunogenic B-cell epitopes and 499 human leukocyte antigen (HLA)-restricted T-cell epitopes. Thirty multi-epitope peptide vaccines were designed by iNeo-Suite and manufactured by solid-phase synthesis. Docking analysis confirmed stable hydrogen bonds of epitopes with their corresponding HLA alleles. When four peptide candidates derived from the spike protein of SARS-CoV-2 were selected to immunize mice, a significantly larger amount of total IgG in serum, as well as an increase of CD19+ cells in the inguinal lymph nodes, were observed in the peptide-immunized mice compared to the control. The ratios of IFN-γ-secreting lymphocytes in CD4+ or CD8+ T-cells in the peptide-immunized mice were higher than those in the control mice. There were also a larger number of IFN-γ-secreting T-cells in the spleens of peptide-immunized mice. The peptide vaccines in this study successfully elicited antigen-specific humoral and cellular immune responses in mice. To further validate the safety and efficacy of this vaccine, animal studies using a primate model, as well as clinical trials in humans, are required.
| S-EPMC8230658 | biostudies-literature
Project description:Since the first appearance of the Severe Acute Respiratory Syndrome Coronavirus 2 (SARS- CoV-2) in China on December 2019, the world has now witnessed the emergence of the SARS- CoV-2 outbreak. Therefore, due to the high transmissibility rate of virus, there is an urgent need to design and develop vaccines against SARS-CoV-2 to prevent more cases affected by the virus. In this study, a computational approach is proposed for vaccine design against the envelope (E) protein of SARS-CoV-2, which contains a conserved sequence feature. First, we sought to gain potential B-cell and T-cell epitopes for vaccine designing against SARS-CoV-2. Second, we attempted to develop a multi-epitope vaccine. Immune targeting of such epitopes could theoretically provide defense against SARS-CoV-2. Finally, we evaluated the affinity of the vaccine to major histocompatibility complex (MHC) molecules to stimulate the immune system response to this vaccine. We also identified a collection of B-cell and T-cell epitopes derived from E proteins that correspond identically to SARS-CoV-2 E proteins. The in-silico design of our potential vaccine against E protein of SARS-CoV-2 demonstrated a high affinity to MHC molecules, and it can be a candidate to make a protection against this pandemic event.
| S-EPMC7336711 | biostudies-literature
Project description:BackgroundThe lack of effective treatment against the highly infectious SARS-CoV-2 has aggravated the already catastrophic global health issue. Here, in an attempt to design an efficient vaccine, a thorough immunoinformatics approach was followed to predict the most suitable viral proteins epitopes for building that vaccine.MethodsThe amino acid sequences of four structural proteins (S, M, N, E) along with one potentially antigenic accessory protein (ORF1a) of SARS-CoV-2 were inspected for the most appropriate epitopes to be used for building the vaccine construct. Several immunoinformatics tools were used to assess the antigenicity (VaxiJen server), immunogenicity (IEDB immunogenicity tool), allergenicity (AlgPred), toxigenicity (ToxinPred server), interferon-gamma inducing capacity (IFNepitope server), and the physicochemical properties of the construct (ProtParam tool).ResultsThe final candidate vaccine construct consisted of 468 amino acids, encompassing 29 epitopes. The CTL epitopes that passed the antigenicity, allergenicity, toxigenicity and immunogenicity assessment were four epitopes from S protein, one from M protein, two from N protein, 12 from the ORF1a polyprotein and none from E protein. While the HTL epitopes that passed the antigenicity, allergenicity, toxigenicity and INF-[Formula: see text] were one from S protein, three from M protein, six from the ORF1a polyprotein and none from N and E proteins. All the vaccine properties and its ability to trigger the humoral and cell-mediated immune response were validated computationally. Molecular modeling, docking to TLR3, simulation, and molecular dynamics were also carried out. Finally, a molecular clone using pET28::mAID expression plasmid vector was prepared.ConclusionThe overall results of the study suggest that the final multi-epitope chimeric construct is a potential candidate for an efficient protective vaccine against SARS-CoV-2.
| S-EPMC8266167 | biostudies-literature
Project description:Severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) caused COVID-19 disease in China. So far, no vaccine has licensed to protect against infection with COVID-19, therefore an effective COVID-19 vaccine needed. The aim of this study was to predict antigenic peptides of SARS-CoV-2 for designing the COVID-19 vaccine using immunoinformatic analysis. In this study, T and B-cell epitopes of S protein were predicted and screened based on the antigenicity, toxicity, allergenicity, and cross-reactivity with human proteomes. The epitopes were joined by the appropriate linker. LT-IIc as an adjuvant was attached to the end of the structure. The secondary and 3D structure of the vaccine was predicted. The refinement process was performed to improve the quality of the 3D model structure; the validation process is performed using the Ramachandran plot and ProSA z-score. The proposed vaccine's binding affinity to the HLA-A11:01 and HLA-DRB1_01:01 molecule was evaluated by molecular docking. Using molecular dynamics, the stability of vaccine-HLA complexes was also evaluated. Finally, in silico gene cloning was performed in the pET30a (+) vector. The findings suggest that the current vaccine may be a promising vaccine to prevent SARS-CoV-2 infection.
| S-EPMC7362859 | biostudies-literature