Dataset Information

Selection of homemade mask materials for preventing transmission of COVID-19: A laboratory study.

ABSTRACT: The Coronavirus Disease 2019 (COVID-19) has swept the whole world with high mortality. Since droplet transmission is the main route of transmission, wearing a mask serves as a crucial preventive measure. However, the virus has spread quite quickly, causing severe mask shortage. Finding alternative materials for homemade masks while ensuring the significant performance indicators will help alleviate the shortage of masks. Referring to the national standard for the "Surgical Mask" of China, 17 materials to be selected for homemade masks were tested in four key indicators: pressure difference, particle filtration efficiency, bacterial filtration efficiency and resistance to surface wetting. Eleven single-layer materials met the standard of pressure difference (?49 Pa), of which 3 met the standard of resistance to surface wetting (?3), 1 met the standard of particle filtration efficiency (?30%), but none met the standard of bacterial filtration efficiency (?95%). Based on the testing results of single-layer materials, fifteen combinations of paired materials were tested. The results showed that three double-layer materials including double-layer medical non-woven fabric, medical non-woven fabric plus non-woven shopping bag, and medical non-woven fabric plus granular tea towel could meet all the standards of pressure difference, particle filtration efficiency, and resistance to surface wetting, and were close to the standard of the bacterial filtration efficiency. In conclusion, if resources are severely lacking and medical masks cannot be obtained, homemade masks using available materials, based on the results of this study, can minimize the chance of infection to the maximum extent.

SUBMITTER: Wang D

PROVIDER: S-EPMC7561133 | biostudies-literature | 2020

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Selection of homemade mask materials for preventing transmission of COVID-19: A laboratory study.

Wang Dijia D You Yanjun Y Zhou Xiaoli X Zong Zhiyong Z Huang Hao H Zhang Hui H Yong Xin X Cheng Yifan Y Yang Liu L Guo Qiong Q Long Youlin Y Liu Yan Y Huang Jin J Du Liang L

PloS one 20201015 10

The Coronavirus Disease 2019 (COVID-19) has swept the whole world with high mortality. Since droplet transmission is the main route of transmission, wearing a mask serves as a crucial preventive measure. However, the virus has spread quite quickly, causing severe mask shortage. Finding alternative materials for homemade masks while ensuring the significant performance indicators will help alleviate the shortage of masks. Referring to the national standard for the "Surgical Mask" of China, 17 mat ...[more]

PMID: 33057355

Similar Datasets

Project description:OBJECTIVE:The health care system has been struggling to find the optimal way to protect patients and staff from coronavirus disease 2019 (COVID-19). Our objective was to evaluate the impact of two strategies on transmission of COVID-19 to health care workers (HCW) on labor and delivery (L&D). STUDY DESIGN:We developed a decision analytic model comparing universal COVID-19 screening and universal PPE on L&D. Probabilities and costs were derived from the literature. We used individual models to evaluate different scenarios including spontaneous labor, induced labor, and planned cesarean delivery (CD). The primary outcome was the cost to prevent COVID-19 infection in one HCW. A cost-effectiveness threshold was set at $25,000 to prevent a single infection in an HCW. RESULTS:In the base case using a COVID-19 prevalence of 0.36% (the rate in the United States at the time), universal screening is the preferred strategy because while universal PPE is more effective at preventing COVID-19 transmission, it is also more costly, costing $4,175,229 and $3,413,251 to prevent one infection in the setting of spontaneous and induced labor, respectively. For planned CD, universal PPE is cost saving. The model is sensitive to variations in the prevalence of COVID-19 and the cost of PPE. Universal PPE becomes cost-effective at a COVID-19 prevalence of 34.3 and 29.5% and at a PPE cost of $512.62 and $463.20 for spontaneous and induced labor, respectively. At a higher cost-effectiveness threshold, the prevalence of COVID-19 can be lower for universal PPE to become cost-effective. CONCLUSION:Universal COVID-19 screening is generally the preferred option. However, in locations with high COVID-19 prevalence or where the local societal cost of one HCW being unavailable is the highest such as in rural areas, universal PPE may be cost-effective and preferred. This model may help to provide guidance regarding allocation of resources on L&D during these current and future pandemics. KEY POINTS:· Universal screening is the preferred strategy for labor.. · With high prevalence, universal PPE is cost-effective.. · For planned cesarean, universal PPE is cost saving..

Project description:BackgroundFace mask use has been associated with declines in COVID-19 incidence rates worldwide. A handful of studies have examined the factors associated with face mask use in North America during the COVID-19 pandemic; however, much less is known about the patterns of face mask use and the impact of mask mandates during this time. This information could have important policy implications, now and in the event of future pandemics.ObjectiveTo address existing knowledge gaps, we assessed face mask usage patterns among British Columbia COVID-19 Population Mixing Patterns (BC-Mix) survey respondents and evaluated the impact of the provincial mask mandate on these usage patterns.MethodsBetween September 2020 and July 2022, adult British Columbia residents completed the web-based BC-Mix survey, answering questions on the circumstances surrounding face mask use or lack thereof, movement patterns, and COVID-19-related beliefs. Trends in face mask use over time were assessed, and associated factors were evaluated using multivariable logistic regression. A stratified analysis was done to examine effect modification by the provincial mask mandate.ResultsOf the 44,301 respondents, 81.9% reported wearing face masks during the 23-month period. In-store and public transit mask mandates supported monthly face mask usage rates of approximately 80%, which was further bolstered up to 92% with the introduction of the provincial mask mandate. Face mask users mostly visited retail locations (51.8%) and travelled alone by car (49.6%), whereas nonusers mostly traveled by car with others (35.2%) to their destinations-most commonly parks (45.7%). Nonusers of face masks were much more likely to be male than female, especially in retail locations and restaurants, bars, and cafés. In a multivariable logistic regression model adjusted for possible confounders, factors associated with face mask use included age, ethnicity, health region, mode of travel, destination, and time period. The odds of face mask use were 3.68 times greater when the provincial mask mandate was in effect than when it was not (adjusted odds ratio [aOR] 3.68, 95% CI 3.33-4.05). The impact of the mask mandate was greatest in restaurants, bars, or cafés (mandate: aOR 7.35, 95% CI 4.23-12.78 vs no mandate: aOR 2.81, 95% CI 1.50-5.26) and in retail locations (mandate: aOR 19.94, 95% CI 14.86-26.77 vs no mandate: aOR 7.71, 95% CI 5.68-10.46).ConclusionsStudy findings provide added insight into the dynamics of face mask use during the COVID-19 pandemic. Mask mandates supported increased and sustained high face mask usage rates during the first 2 years of the pandemic, having the greatest impact in indoor public locations with limited opportunity for physical distancing targeted by these mandates. These findings highlight the utility of mask mandates in supporting high face mask usage rates during the COVID-19 pandemic.

Dataset Information

Selection of homemade mask materials for preventing transmission of COVID-19: A laboratory study.

Publications

Selection of homemade mask materials for preventing transmission of COVID-19: A laboratory study.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets