SeMSA: a compact super absorber optimised for broadband, low-frequency noise attenuation.
Ontology highlight
ABSTRACT:
SUBMITTER: McKay A
PROVIDER: S-EPMC7578840 | biostudies-literature | 2020 Oct
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:A hybrid acoustic metamaterial is proposed as a new class of sound absorber, which exhibits superior broadband low-frequency sound absorption as well as excellent mechanical stiffness/strength. Based on the honeycomb-corrugation hybrid core (H-C hybrid core), we introduce perforations on both top facesheet and corrugation, forming perforated honeycomb-corrugation hybrid (PHCH) to gain super broadband low-frequency sound absorption. Applying the theory of micro-perforated panel (MPP), we establish a theoretical method to calculate the sound absorption coefficient of this new kind of metamaterial. Perfect sound absorption is found at just a few hundreds hertz with two-octave 0.5 absorption bandwidth. To verify this model, a finite element model is developed to calculate the absorption coefficient and analyze the viscous-thermal energy dissipation. It is found that viscous energy dissipation at perforation regions dominates the total energy consumed. This new kind of acoustic metamaterials show promising engineering applications, which can serve as multiple functional materials with extraordinary low-frequency sound absorption, excellent stiffness/strength and impact energy absorption.
| S-EPMC5327422 | biostudies-literature
Project description:Plasmonic nanostructures can significantly advance broadband visible-light absorption, with absorber thicknesses in the sub-wavelength regime, much thinner than conventional broadband coatings. Such absorbers have inherently very small heat capacity, hence a very rapid response time, and high light power-to-temperature sensitivity. Additionally, their surface emissivity can be spectrally tuned to suppress infrared thermal radiation. These capabilities make plasmonic absorbers promising candidates for fast light-to-heat applications, such as radiation sensors. Here we investigate the light-to-heat conversion properties of a metal-insulator-metal broadband plasmonic absorber, fabricated as a free-standing membrane. Using a fast IR camera, we show that the transient response of the absorber has a characteristic time below 13 ms, nearly one order of magnitude lower than a similar membrane coated with a commercial black spray. Concurrently, despite the small thickness, due to the large absorption capability, the achieved absorbed light power-to-temperature sensitivity is maintained at the level of a standard black spray. Finally, we show that while black spray has emissivity similar to a black body, the plasmonic absorber features a very low infra-red emissivity of almost 0.16, demonstrating its capability as selective coating for applications with operating temperatures up to 400°C, above which the nano-structure starts to deform.
| S-EPMC4241508 | biostudies-literature
Project description:An innovative tunable and polarization-insensitive 1.6-8 GHz frequency selective surface (FSS) absorber was investigated in this study. The proposed FSS, which is in 4-axial symmetrical form, includes a novel array of PIN diodes with biasing lines including inductors. A gradually reduced equivalent resistor of PIN diodes can be achieved with increasing DC voltage, which characterizes tunable, multi-resonance absorption peaks. Via this simplified design, small value resistor and equivalent capacitance of the gap between patterns can improve the absorber's performance in low frequencies; an active tunable absorber can be realized in a broad frequency range by employing adjustable devices. Changing the working state of the PIN diode allows the user to obtain strong absorption within the desired frequency. We analyzed the performance of the proposed absorber and found that it indeed shows very favorable absorption performance in low frequency (-10 dB in 1.6-4.3 GHz) and wideband (-8 dB in 4.3-5.4 GHz and -10 dB in 5.4-8.0 GHz) conditions. Calculation and simulation results also illustrated that the absorber is entirely polarization-insensitive.
| S-EPMC4794805 | biostudies-other
Project description:Vibration and noise control are among the classical engineering problems that still draw extensive research interest today. Multiple active and passive control techniques to resolve these problems have been reported, however, the challenges remain substantial. The recent surge of research activities on acoustic metamaterials for vibration and noise control are testimony to the fact that acoustic metamaterial is no longer limited to pure theoretical concepts. For vibration and noise control over an ultrawide frequency region, 3-D metastructures emerge as a novel solution tool to resolve this problem. In that context, the present study reports a novel proposal for 3-D monolithic phononic metastructures with the capability to induce low frequency ultrawide three-dimensional bandgaps with relative bandwidth enhancements of 157.6% and 160.1%. The proposed monolithic metastructure designs consist of elastic frame assembly that is connected with the rigid cylindrical masses. Such structural configuration mimics monoatomic mass-spring chain where an elastic spring is connected with a rigid mass. We develop an analytical model based on monoatomic mass-spring chain to determine the acoustic mode frequency responsible for opening the bandgap. The wave dispersion study reveals the presence of ultrawide bandgaps for both types of metastructures. The modal analysis shows distribution of vibration energy in the bandgap opening (global resonant mode) and closing (local resonant mode) bounding edges. We further analyze the band structures and discuss the physical concepts that govern such ultrawide bandgap. Vibration attenuation inside the bandgap frequency range is demonstrated by frequency response studies conducted by two different finite element models. Thanks to additive manufacturing technology, 3-D prototypes are prepared and low amplitude vibration test is performed to validate the numerical findings. Experimental results show the presence of an ultrawide vibration attenuation zone that spreads over a broadband frequency spectrum. The bandgaps reported by the proposed metastructures are scale and material independent. The research methodology, modelling and design strategy presented here may pave the way for the development of novel meta-devices to control vibration and noises over a broadband frequency range.
| S-EPMC8010083 | biostudies-literature
Project description:We demonstrate a broadband, polarization independent, wide-angle absorber based on a metallic metasurface architecture, which accomplishes greater than 90% absorptance in the visible and near-infrared range of the solar spectrum, and exhibits low absorptivity (emissivity) at mid- and far-infrared wavelengths. The complex unit cell of the metasurface solar absorber consists of eight pairs of gold nano-resonators that are separated from a gold ground plane by a thin silicon dioxide spacer. Our experimental measurements reveal high-performance absorption over a wide range of incidence angles for both s- and p-polarizations. We also investigate numerically the frequency-dependent field and current distributions to elucidate how the absorption occurs within the metasurface structure.
| S-EPMC4734337 | biostudies-other
Project description:The Brewster's law predicts zero reflection of p-polarization on a dielectric surface at a particular angle. However, when loss is introduced into the permittivity of the dielectric, the Brewster condition breaks down and reflection unavoidably appears. In this work, we found an exception to this long-standing dilemma by creating a class of nonmagnetic anisotropic metamaterials, where anomalous Brewster effects with independently tunable absorption and refraction emerge. This loss-independent Brewster effect is bestowed by the extra degrees of freedoms introduced by anisotropy and strictly protected by the reciprocity principle. The bandwidth can cover an extremely wide spectrum from dc to optical frequencies. Two examples of reflectionless Brewster absorbers with different Brewster angles are both demonstrated to achieve large absorbance in a wide spectrum via microwave experiments. Our work extends the scope of Brewster effect to the horizon of nonmagnetic absorptive materials, which promises an unprecedented wide bandwidth for reflectionless absorption with high efficiency.
| S-EPMC8062598 | biostudies-literature
Project description:A previously developed spectrometer for broadband electron paramagnetic resonance (EPR) spectroscopy of dilute randomly oriented systems has been considerably modified to extend the frequency reach down to the hundred MHz range and to boost concentration sensitivity by 1 to 2 orders of magnitude. The instrument is now suitable for the study of biological systems in particular metalloproteins. As a proof of concept, examples from the class of low-spin ferric hemoproteins are studied in terms of frequency-dependent changes in their EPR spectra. Mono-heme cytochrome c EPR is determined by g-strain over a wide frequency range, whereas a combination of unresolved ligand hyperfine interaction and concentration-dependent intermolecular dipolar interaction becomes dominant at very low frequencies. In the four heme containing cytochrome c3, g-strain combines with intramolecular dipolar interaction over the full-studied frequency range of 0.23-12.0 GHz. It is concluded that the point-dipole approach is inappropriate to describe magnetic interactions between low-spin ferric heme systems and that a body of literature on redox interactions in multi-heme proteins will be affected by this conclusion.
| S-EPMC8154605 | biostudies-literature
Project description:An integrated model utilizing external parasitic capacitors for a dual-band metamaterial perfect absorber (DMPA) is proposed and demonstrated in the UHF radio band. By adjusting the lumped capacitors on a simple meta-surface, the thickness of absorber is reduced to be only 1/378 and 1/320 with respect to the operating wavelength at 305 and 360.5?MHz, respectively. The simulations and the experiments confirm that the DMPA can maintain an absorption over 91% in a wide range of incident angle (up to 55°) and independent of the polarization of incident radiation. Additionally, we examine the integrated model for smaller dual-band absorber and absorption performance at higher frequencies (LTE band). Finally, we consolidate our approach by fabricating an ultrathin triple-band perfect absorber miniaturized to be only 1/591 of the longest operating wavelength. Our work is expected to contribute to the actualization of metamaterial-based devices working at radio frequency.
| S-EPMC6072771 | biostudies-literature
Project description:Architected materials that control elastic wave propagation are essential in vibration mitigation and sound attenuation. Phononic crystals and acoustic metamaterials use band-gap engineering to forbid certain frequencies from propagating through a material. However, existing solutions are limited in the low-frequency regimes and in their bandwidth of operation because they require impractical sizes and masses. Here, we present a class of materials (labeled elastic metastructures) that supports the formation of wide and low-frequency band gaps, while simultaneously reducing their global mass. To achieve these properties, the metastructures combine local resonances with structural modes of a periodic architected lattice. Whereas the band gaps in these metastructures are induced by Bragg scattering mechanisms, their key feature is that the band-gap size and frequency range can be controlled and broadened through local resonances, which are linked to changes in the lattice geometry. We demonstrate these principles experimentally, using advanced additive manufacturing methods, and inform our designs using finite-element simulations. This design strategy has a broad range of applications, including control of structural vibrations, noise, and shock mitigation.
| S-EPMC4968765 | biostudies-literature
Project description:Light trapping is an important performance of ultra-thin solar cells because it cannot only increase the optical absorption in the photoactive region but it also allows for the efficient absorption with very little materials. Semiconductor-nanoantenna has the ability to enhance light trapping and raise the transfer efficiency of solar energy. In this work, we present a solar absorber based on the gallium arsenide (GaAs) nanoantennas. Near-perfect light absorption (above 90%) is achieved in the wavelength which ranges from 468 to 2870?nm, showing an ultra-broadband and near-unity light trapping for the sun's radiation. A high short-circuit current density up to 61.947?mA/cm2 is obtained. Moreover, the solar absorber is with good structural stability and high temperature tolerance. These offer new perspectives for achieving ultra-compact efficient photovoltaic cells and thermal emitters.
| S-EPMC7142205 | biostudies-literature