Browse
Submit Data
Databases
API
Help

Dataset Information

22 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

A Mono-Substituted Silicon(II) Cation: A Crystalline "Supersilylene".

ABSTRACT: Mono-coordinated silicon(II) cations are predicted to be reactive ambiphiles, combining the typically high Lewis acidity of silicon cations with nucleophilicity due to the presence of an electron pair at the same atomic centre. Here, a carbazole-derived scaffold was used to isolate salts with a mono-coordinated silicon(II) cation, [RSi]+ (R=bulky carbazolyl substituent), by halide abstraction from a base-free halosilylene, RSiI, with Ag[Al(Ot BuF )4 ]. Despite the bulk of the carbazolyl moiety, the silylenylium cation [RSi]+ retains high reactivity. It was shown to react with an amine to form three bonds at the silicon atom in one reaction which conforms with the notion of a "supersilylene". The resulting silylium cation [RSi(H)NR'2 ]+ (in the formal oxidation state SiIV ) obtained by oxidative addition of an NH bond at [RSi]+ is even more acidic than the silylenylium cation (SiII ) due to the absence of a lone pair of electrons the silicon atom.

SUBMITTER: Hinz A

PROVIDER: S-EPMC7590127 | biostudies-literature | 2020 Aug

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

A Mono-Substituted Silicon(II) Cation: A Crystalline "Supersilylene".

Hinz Alexander A

Angewandte Chemie (International ed. in English) 20200826 43

Mono-coordinated silicon(II) cations are predicted to be reactive ambiphiles, combining the typically high Lewis acidity of silicon cations with nucleophilicity due to the presence of an electron pair at the same atomic centre. Here, a carbazole-derived scaffold was used to isolate salts with a mono-coordinated silicon(II) cation, [RSi]+ (R=bulky carbazolyl substituent), by halide abstraction from a base-free halosilylene, RSiI, with Ag[Al(Ot BuF )4 ]. ...[more]

PMID: 32779821

Similar Datasets

Monolithic and Single-Crystalline Aluminum-Silicon Heterostructures.

Project description:Overcoming the difficulty in the precise definition of the metal phase of metal-Si heterostructures is among the key prerequisites to enable reproducible next-generation nanoelectronic, optoelectronic, and quantum devices. Here, we report on the formation of monolithic Al-Si heterostructures obtained from both bottom-up and top-down fabricated Si nanostructures and Al contacts. This is enabled by a thermally induced Al-Si exchange reaction, which forms abrupt and void-free metal-semiconductor interfaces in contrast to their bulk counterparts. The selective and controllable transformation of Si NWs into Al provides a nanodevice fabrication platform with high-quality monolithic and single-crystalline Al contacts, revealing resistivities as low as ρ = (6.31 ± 1.17) × 10-8 Ω m and breakdown current densities of Jmax = (1 ± 0.13) × 1012 Ω m-2. Combining transmission electron microscopy and energy-dispersive X-ray spectroscopy confirmed the composition as well as the crystalline nature of the presented Al-Si-Al heterostructures, with no intermetallic phases formed during the exchange process in contrast to state-of-the-art metal silicides. The thereof formed single-element Al contacts explain the robustness and reproducibility of the junctions. Detailed and systematic electrical characterizations carried out on back- and top-gated heterostructure devices revealed symmetric effective Schottky barriers for electrons and holes. Most importantly, fulfilling compatibility with modern complementary metal-oxide semiconductor fabrication, the proposed thermally induced Al-Si exchange reaction may give rise to the development of next-generation reconfigurable electronics relying on reproducible nanojunctions.

| S-EPMC9185687 | biostudies-literature

Advanced Silicon-on-Insulator: Crystalline Silicon on Atomic Layer Deposited Beryllium Oxide.

Project description:Silicon-on-insulator (SOI) technology improves the performance of devices by reducing parasitic capacitance. Devices based on SOI or silicon-on-sapphire technology are primarily used in high-performance radio frequency (RF) and radiation sensitive applications as well as for reducing the short channel effects in microelectronic devices. Despite their advantages, the high substrate cost and overheating problems associated with complexities in substrate fabrication as well as the low thermal conductivity of silicon oxide prevent broad applications of this technology. To overcome these challenges, we describe a new approach of using beryllium oxide (BeO). The use of atomic layer deposition (ALD) for producing this material results in lowering the SOI wafer production cost. Furthermore, the use of BeO exhibiting a high thermal conductivity might minimize the self-heating issues. We show that crystalline Si can be grown on ALD BeO and the resultant devices exhibit potential for use in advanced SOI technology applications.

| S-EPMC5643296 | biostudies-literature

Electrodeposition of crystalline silicon films from silicon dioxide for low-cost photovoltaic applications.

Project description:Crystalline-silicon solar cells have dominated the photovoltaics market for the past several decades. One of the long standing challenges is the large contribution of silicon wafer cost to the overall module cost. Here, we demonstrate a simple process for making high-purity solar-grade silicon films directly from silicon dioxide via a one-step electrodeposition process in molten salt for possible photovoltaic applications. High-purity silicon films can be deposited with tunable film thickness and doping type by varying the electrodeposition conditions. These electrodeposited silicon films show about 40 to 50% of photocurrent density of a commercial silicon wafer by photoelectrochemical measurements and the highest power conversion efficiency is 3.1% as a solar cell. Compared to the conventional manufacturing process for solar grade silicon wafer production, this approach greatly reduces the capital cost and energy consumption, providing a promising strategy for low-cost silicon solar cells production.

| S-EPMC6920409 | biostudies-literature

Diffusion-Controlled Porous Crystalline Silicon Lithium Metal Batteries.

Project description:Nanostructured porous silicon materials have recently advanced as hosts for Li-metal plating. However, limitations involve detrimental silicon self-pulverization, Li-dendrites, and the ability to achieve wafer-level integration of non-composite, pure silicon anodes. compo. Herein, full cells featuring low-resistance, wafer-scale porous crystalline silicon (PCS) anodes are embedded with a nanoporous Li-plating and diffusion-regulating surface layer upon combined wafer surface cleaning (SC) and anodization. LL Lithiophilic surface formation is illustrated via correlation of surface groups and X-ray structure. Low-cost SC-PCS anodes require no composite formulation, and pre-lithiation enables sustainable Li-metal plating/stripping on the lithiophilic surface and in SC-PCS bulk nanostructure. Anodization time and C-rate determined competitive full cell performance: NMC811 | 4800 s SC-PCS: 195 mAh/g (99.9% coulombic efficiency [C.E.], C/3, 50 cycles), 165 mAh/g, 587 Wh/kg (97.1% C.E., C/3 and C/2 rate, 350 cycles), 24 ??cm2 SC-PCS-resistivity (900 cycles); 160 ?m LCO | 500 s SC-PCS: 102 mAh/g (94.1% C.E., 1C, 350 cycles).

| S-EPMC7553342 | biostudies-literature

Fracture of crystalline silicon nanopillars during electrochemical lithium insertion.

Project description:From surface hardening of steels to doping of semiconductors, atom insertion in solids plays an important role in modifying chemical, physical, and electronic properties of materials for a variety of applications. High densities of atomic insertion in a solid can result in dramatic structural transformations and associated changes in mechanical behavior: This is particularly evident during electrochemical cycling of novel battery electrodes, such as alloying anodes, conversion oxides, and sulfur and oxygen cathodes. Silicon, which undergoes 400% volume expansion when alloying with lithium, is an extreme case and represents an excellent model system for study. Here, we show that fracture locations are highly anisotropic for lithiation of crystalline Si nanopillars and that fracture is strongly correlated with previously discovered anisotropic expansion. Contrary to earlier theoretical models based on diffusion-induced stresses where fracture is predicted to occur in the core of the pillars during lithiation, the observed cracks are present only in the amorphous lithiated shell. We also show that the critical fracture size is between about 240 and 360 nm and that it depends on the electrochemical reaction rate.

| S-EPMC3306693 | biostudies-literature

An isolable, crystalline complex of square-planar silicon(IV).

Project description:The structure and reactivity of silicon(IV), the second most abundant element in our Earth's crust, is determined by its invariant tetrahedral coordination geometry. Silicon(IV) with a square-planar configuration (ptSi IV ) represents a transition state. Quantum theory supported the feasibility of stabilizing ptSi IV by structural constraint, but its isolation has not been achieved yet. Here, we present the synthesis and full characterization of the first square-planar coordinated silicon(IV). The planarity provokes an extremely low-lying unoccupied molecular orbital that induces unusual silicon redox chemistry and CH-agostic interactions. The small separation of the frontier molecular orbitals enables visible-light ligand-element charge transfer and bond-activation reactivity. Previously, such characteristics have been reserved for d-block metals or low-valent p-block elements. Planarization transfers them, for the first time, to a p-block element in the normal valence state.

| S-EPMC8367297 | biostudies-literature

Preparation of mono-substituted malonic acid half oxyesters (SMAHOs).

Project description:The use of mono-substituted malonic acid half oxyesters (SMAHOs) has been hampered by the sporadic references describing their preparation. An evaluation of different approaches has been achieved, allowing to define the best strategies to introduce diversity on both the malonic position and the ester function. A classical alkylation step of a malonate by an alkyl halide followed by a monosaponification gave access to reagents bearing different substituents at the malonic position, including functionalized derivatives. On the other hand, the development of a monoesterification step of a substituted malonic acid derivative proved to be the best entry for diversity at the ester function, rather than the use of an intermediate Meldrum acid. Both these transformations are characterized by their simplicity and efficiency, allowing a straightforward access to SMAHOs from cheap starting materials.

| S-EPMC8381853 | biostudies-literature

Microchannel contacting of crystalline silicon solar cells.

Project description:There is tremendous interest in reducing losses caused by the metal contacts in silicon photovoltaics, particularly the optical and resistive losses of the front metal grid. One commonly sought-after goal is the creation of high aspect-ratio metal fingers which provide an optically narrow and low resistance pathway to the external circuit. Currently, the most widely used metal contact deposition techniques are limited to widths and aspect-ratios of ~40 μm and ~0.5, respectively. In this study, we introduce the use of a micropatterned polydimethylsiloxane encapsulation layer to form narrow (~20 μm) microchannels, with aspect-ratios up to 8, on the surface of solar cells. We demonstrate that low temperature metal pastes, electroless plating and atomic layer deposition can all be used within the microchannels. Further, we fabricate proof-of-concept structures including simple planar silicon heterojunction and homojunction solar cells. While preliminary in both design and efficiency, these results demonstrate the potential of this approach and its compatibility with current solar cell architectures.

| S-EPMC5567299 | biostudies-other

Unveiling the formation pathway of single crystalline porous silicon nanowires.

Project description:Porous silicon nanowire is emerging as an interesting material system due to its unique combination of structural, chemical, electronic, and optical properties. To fully understand their formation mechanism is of great importance for controlling the fundamental physical properties and enabling potential applications. Here we present a systematic study to elucidate the mechanism responsible for the formation of porous silicon nanowires in a two-step silver-assisted electroless chemical etching method. It is shown that silicon nanowire arrays with various porosities can be prepared by varying multiple experimental parameters such as the resistivity of the starting silicon wafer, the concentration of oxidant (H(2)O(2)) and the amount of silver catalyst. Our study shows a consistent trend that the porosity increases with the increasing wafer conductivity (dopant concentration) and oxidant (H(2)O(2)) concentration. We further demonstrate that silver ions, formed by the oxidation of silver, can diffuse upwards and renucleate on the sidewalls of nanowires to initiate new etching pathways to produce a porous structure. The elucidation of this fundamental formation mechanism opens a rational pathway to the production of wafer-scale single crystalline porous silicon nanowires with tunable surface areas ranging from 370 to 30 m(2) g(-1) and can enable exciting opportunities in catalysis, energy harvesting, conversion, storage, as well as biomedical imaging and therapy.

| S-EPMC3061564 | biostudies-literature

Spin Exchange Interaction in Substituted Copper Phthalocyanine Crystalline Thin Films.

Project description:The origins of spin exchange in crystalline thin films of Copper Octabutoxy Phthalocyanine (Cu-OBPc) are investigated using Magnetic Circular Dichroism (MCD) spectroscopy. These studies are made possible by a solution deposition technique which produces highly ordered films with macroscopic grain sizes suitable for optical studies. For temperatures lower than 2 K, the contribution of a specific state in the valence band manifold originating from the hybridized lone pair in nitrogen orbitals of the Phthalocyanine ring, bears the Brillouin-like signature of an exchange interaction with the localized d-shell Cu spins. A comprehensive MCD spectral analysis coupled with a molecular field model of a σπ - d exchange analogous to sp-d interactions in Diluted Magnetic Semiconductors (DMS) renders an enhanced Zeeman splitting and a modified g-factor of -4 for the electrons that mediate the interaction. These studies define an experimental tool for identifying electronic states involved in spin-dependent exchange interactions in organic materials.

| S-EPMC4642266 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data