Dataset Information

In situ bone regeneration of large cranial defects using synthetic ceramic implants with a tailored composition and design.

ABSTRACT: The repair of large cranial defects with bone is a major clinical challenge that necessitates novel materials and engineering solutions. Three-dimensionally (3D) printed bioceramic (BioCer) implants consisting of additively manufactured titanium frames enveloped with CaP BioCer or titanium control implants with similar designs were implanted in the ovine skull and at s.c. sites and retrieved after 12 and 3 mo, respectively. Samples were collected for morphological, ultrastructural, and compositional analyses using histology, electron microscopy, and Raman spectroscopy. Here, we show that BioCer implants provide osteoinductive and microarchitectural cues that promote in situ bone regeneration at locations distant from existing host bone, whereas bone regeneration with inert titanium implants was confined to ingrowth from the defect boundaries. The BioCer implant promoted bone regeneration at nonosseous sites, and bone bonding to the implant was demonstrated at the ultrastructural level. BioCer transformed to carbonated apatite in vivo, and the regenerated bone displayed a molecular composition indistinguishable from that of native bone. Proof-of-principle that this approach may represent a shift from mere reconstruction to in situ regeneration was provided by a retrieved human specimen, showing that the BioCer was transformed into well-vascularized osteonal bone, with a morphology, ultrastructure, and composition similar to those of native human skull bone.

SUBMITTER: Omar O

PROVIDER: S-EPMC7604495 | biostudies-literature | 2020 Oct

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

In situ bone regeneration of large cranial defects using synthetic ceramic implants with a tailored composition and design.

Omar Omar O Engstrand Thomas T Kihlström Burenstam Linder Lars L Åberg Jonas J Shah Furqan A FA Palmquist Anders A Birgersson Ulrik U Elgali Ibrahim I Pujari-Palmer Michael M Engqvist Håkan H Thomsen Peter P

Proceedings of the National Academy of Sciences of the United States of America 20201012 43

The repair of large cranial defects with bone is a major clinical challenge that necessitates novel materials and engineering solutions. Three-dimensionally (3D) printed bioceramic (BioCer) implants consisting of additively manufactured titanium frames enveloped with CaP BioCer or titanium control implants with similar designs were implanted in the ovine skull and at s.c. sites and retrieved after 12 and 3 mo, respectively. Samples were collected for morphological, ultrastructural, and compositi ...[more]

PMID: 33046631

Similar Datasets

Project description:Osseointegration, the ability for an implant to be anchored in bone tissue with direct bone-implant contact and allowing for continuous adaptive remodelling, is clinically used in different reconstructive fields, such as dentistry, orthopedics and otology. The latter uses a bone conducting sound processor connected to a skin-penetrating abutment that is mounted on a titanium implant placed in the temporal bone, thereby acting as a path for transmission of the vibrations generated by the sound processor. The success of the treatment relies on bone healing and osseointegration, which could be improved by surface modifications. The aim of this study was to evaluate the long-term osseointegration in a sheep skull model and compare a laser-ablated implant surface with a machined implant. Commercially available 4 mm titanium implants, either with a machined (Wide Ponto) or a laser-ablated surface (Ponto BHX, Oticon Medical, Sweden), were used in the current study. The surfaces were evaluated by scanning electron microscopy. The implantation was performed with a full soft tissue flap and the osteotomy was prepared using the MIPS drill kit (Oticon Medical, Sweden) prior to installation of the implants in the frontal bone of eight female sheep. After five months, biopsies including the implant and surrounding bone tissue obtained, processed and analysed using histology, histomorphometry, scanning electron microscopy and Raman spectroscopy. The animals healed well, without signs of adverse events. Histomorphometry showed a large amount of bone tissue around both implant types, with 75% of the threaded area occupied by bone for both implant types. A large amount of bone-implant contact was observed for both implant types, with 67%-71% of the surface covered by bone. Both implant types were surrounded by mature remodelled lamellar bone with high mineral content, corroborating the histological observations. The current results show that the laser-ablated surface induces healing similar to the well-known clinically used machined surface in ovine cranial bone. In conclusion, the present long-term experimental results indicate that a laser-ablated implant performs equally well as a clinically used implant with a machined surface. This, together with previously reported, improved early biomechanical anchorage, suggests future, safe and efficient clinical potential.

Project description:PURPOSE:To present a case series of zygomatic implants combined with bone regeneration and soft tissue enhancement techniques to reduce the risk of biological delayed complications such as maxillary sinusitis and soft tissue recession. MATERIALS AND METHODS:Zygomatic implants placed simultaneously with different bone regeneration techniques (buccal, palatal and buccal-palatal bone regeneration) and soft tissue enhancement techniques (pediculate and free connective tissue graft) were followed for at least 12 months. The following information was collected: patient age and sex, number of zygomatic implants, zygomatic implant success rate, zygomatic implant position according to classification of the Zygomatic Anatomy Guide Approach (ZAGA), sinus membrane perforation, type and outcome of the bone regeneration or the soft tissue enhancement technique, bone gain (width and length along the zygomatic implant) and keratinized buccal mucosa width, duration of follow-up, loading protocol (immediate or delayed) and biological complications (maxillary sinusitis and soft tissue recession). RESULTS:Thirty-one zygomatic implants placed in 19 patients were included. All implants were successful and none of the implants presented biological complications. The bone regeneration technique was successful in 30 of 31 cases with a mean palatal bone width of 3 mm, buccal bone width of 2.65 mm, palatal bone length of 6.5 mm and buccal bone length of 8.3 mm. The success rate of soft tissue enhancement was 100% and it established at least 2 mm of keratinized buccal mucosa width in all implants. CONCLUSIONS:Within the limitations of the present study, bone regeneration and soft tissue enhancement techniques were useful to establish more favorable conditions of the peri-implant tissues around zygomatic implants. This could prevent biological complications such as maxillary sinusitis and soft tissue recessions. Prospective and randomized controlled clinical trials with longer follow-up periods are advisable.

Dataset Information

In situ bone regeneration of large cranial defects using synthetic ceramic implants with a tailored composition and design.

Publications

In situ bone regeneration of large cranial defects using synthetic ceramic implants with a tailored composition and design.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets