Dataset Information

Characterization of spray dried powders with nucleic acid-containing PEI nanoparticles.

ABSTRACT: Localized aerosol delivery of gene therapies is a promising treatment of severe pulmonary diseases including lung cancer, cystic fibrosis, COPD and asthma. The administration of drugs by inhalation features multiple benefits including an enhanced patient acceptability and compliance. The application of a spray dried powder formulation has advantages over solutions due to their increased stability and shelf life. Furthermore, optimal sizes of the powder can be obtained by spray drying to allow a deep lung deposition. The present study optimized the parameters involved with spray drying polyplexes formed by polyethylenimine (PEI) and nucleic acids in inert excipients to generate a nano-embedded microparticle (NEM) powder with appropriate aerodynamic diameter. Furthermore, the effects of the excipient matrix used to generate the NEM powder on the biological activity of the nucleic acid and the ability to recover the embedded nanoparticles was investigated. The study showed that bioactivity and nucleic acid integrity was preserved after spray drying, and that polyplexes could be reconstituted from the dry powders made with trehalose but not mannitol as a stabilizer. Scanning electron microscopy (SEM) showed trehalose formulations that formed fused, lightly corrugated spherical particles in the range between 1 and 5 µm, while mannitol formulations had smooth surfaces and consisted of more defined particles. After redispersion of the microparticles in water, polyplex dispersions are obtained that are comparable to the initial formulations before spray drying. Cellular uptake and transfection studies conducted in lung adenocarcinoma cells show that redispersed trehalose particles performed similar to or better than polyplexes that were not spray dried. A method for quantifying polymer and nucleic acid loss following spray drying was developed in order to ensure that equal nucleic acid amounts were used in all in vitro experiments. The results confirm that spray dried NEM formulations containing nucleic acids can be prepared with characteristics known to be optimal for inhalation therapy.

SUBMITTER: Keil TWM

PROVIDER: S-EPMC7611027 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Similar Datasets

Project description:Soluplus is a polymer that has been explored to prepare nanocomposites for pulmonary drug delivery and is non-toxic. However, its aerosolization attributes when spray-dried have not been investigated. Hence, this work aimed to investigate the aerosol performance of soluplus-based spray-dried powders. In addition, the potential use of leucine to improve the aerosolization of such particles was also investigated by including leucine at 10 or 20% w/w. 4% w/w salbutamol was used as a model drug in all the formulations primarily to aid quantification during aerosolization evaluation and for assessing the interaction between the drug and soluplus using infrared spectroscopy with the multivariate analysis approach of principal component analysis (PCA). Three formulations (4% salbutamol/96% soluplus, 4% salbutamol/86% soluplus/10% leucine, 4% salbutamol/76% soluplus/20% leucine) were prepared. The formulations were characterized in terms of solid-state, water content, particle size/morphology, and aerosolization. Similarly, two additional formulations (14% salbutamol/86% soluplus and 24% salbutamol/76% soluplus) were prepared to assess potential non-covalent interactions between salbutamol and soluplus. The formulations with only salbutamol and soluplus were amorphous, as evident from X-ray diffraction. Leucine was crystalline in the formulations. All the spray-dried formulations were irregular spheres with surface corrugation. The 96% soluplus powder showed an emitted fraction (EF) and fine particles fraction (FPF) of 91.9 and 49.8%, respectively. The inclusion of leucine at 10% did not increase the EF; however, an increase in FPF (69.7%) was achieved with 20% leucine. PCA of the infrared spectra suggested potential non-covalent interactions between salbutamol and soluplus. It hinted at the potential involvement of ketone groups of the excipient. This study concludes that soluplus-based spray-dried powder with or without leucine can potentially be utilized for pulmonary drug delivery. In addition, PCA can effectively be utilized in assessing interactions and overcoming limitations associated with visual assessment of the spectra of such formulations.

Project description:BACKGROUND:OZ439 is a new chemical entity which is active against drug-resistant malaria and shows potential as a single-dose cure. However, development of an oral formulation with desired exposure has proved problematic, as OZ439 is poorly soluble (BCS Class II drug). In order to be feasible for low and middle income countries (LMICs), any process to create or formulate such a therapeutic must be inexpensive at scale, and the resulting formulation must survive without refrigeration even in hot, humid climates. We here demonstrate the scalability and stability of a nanoparticle (NP) formulation of OZ439. Previously, we applied a combination of hydrophobic ion pairing and Flash NanoPrecipitation (FNP) to formulate OZ439 NPs 150 nm in diameter using the inexpensive stabilizer hydroxypropyl methylcellulose acetate succinate (HPMCAS). Lyophilization was used to process the NPs into a dry form, and the powder's in vitro solubilization was over tenfold higher than unprocessed OZ439. METHODS:In this study, we optimize our previous formulation using a large-scale multi-inlet vortex mixer (MIVM). Spray drying is a more scalable and less expensive operation than lyophilization and is, therefore, optimized to produce dry powders. The spray dried powders are then subjected to a series of accelerated aging stability trials at high temperature and humidity conditions. RESULTS:The spray dried OZ439 powder's dissolution kinetics are superior to those of lyophilized NPs. The powder's OZ439 solubilization profile remains constant after 1 month in uncapped vials in an oven at 50 °C and 75% RH, and for 6 months in capped vials at 40 °C and 75% RH. In fasted-state intestinal fluid, spray dried NPs achieved 80-85% OZ439 dissolution, to a concentration of 430 µg/mL, within 3 h. In fed-state intestinal fluid, 95-100% OZ439 dissolution is achieved within 1 h, to a concentration of 535 µg/mL. X-ray powder diffraction and differential scanning calorimetry profiles similarly remain constant over these periods. CONCLUSIONS:The combined nanofabrication and drying process described herein, which utilizes two continuous unit operations that can be operated at scale, is an important step toward an industrially-relevant method of formulating the antimalarial OZ439 into a single-dose oral form with good stability against humidity and temperature.

Dataset Information

Characterization of spray dried powders with nucleic acid-containing PEI nanoparticles.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets