Dataset Information

Determination of Cholesterol Content in Butter by HPLC: Up-to-Date Optimization, and In-House Validation Using Reference Materials.

ABSTRACT: This work deals with up-to-date optimization of cholesterol content determination when saponification and extraction procedures as well as HPLC conditions were studied. As found, optimal conditions for saponification process were identified by 15 min heating in the presence of 0.015 L of methanolic KOH solution with a concentration 1 mol/L with subsequent 0.015 L n-hexane-chloroform binary mixture (1:1, v/v) double extraction. HPLC separation consisted of isocratic elution with flow rate of 0.5 mL/min mobile phase composed of acetonitrile/methanol 60:40 (v/v) and stationary phase Zorbax Eclipse Plus C18 column 2.1 × 100 mm, 3.5 ?m particle size diameters with detector wavelength 205 nm. The method passed through in-house validation criteria and its suitability was verified by analysis of butter reference materials. In final, the average content of cholesterol content in butter was determined at 2271.0 mg/kg. Thus, the method is suitable for the determination of cholesterol content in butter and probably also in other dairy products.

SUBMITTER: Kolaric L

PROVIDER: S-EPMC7650802 | biostudies-literature | 2020 Sep

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Determination of Cholesterol Content in Butter by HPLC: Up-to-Date Optimization, and In-House Validation Using Reference Materials.

Kolarič Lukáš L Šimko Peter P

Foods (Basel, Switzerland) 20200929 10

This work deals with up-to-date optimization of cholesterol content determination when saponification and extraction procedures as well as HPLC conditions were studied. As found, optimal conditions for saponification process were identified by 15 min heating in the presence of 0.015 L of methanolic KOH solution with a concentration 1 mol/L with subsequent 0.015 L n-hexane-chloroform binary mixture (1:1, <i>v</i>/<i>v</i>) double extraction. HPLC separation consisted of isocratic elution with flo ...[more]

PMID: 33003413

Similar Datasets

Project description:Apparent amylose content (AAC) is one of the most important parameters in rice quality evaluation. In this study, four rice reference materials used to test rice AAC were developed. The AAC of rice reference materials were measured by a spectrophotometric method with a defatting procedure, calibrated from potato amylose and waxy rice amylopectin at the absorption wavelengths of 620 and 720 nm. Homogeneity test (n = 20) was judged by F-test based on the mean squares of among and within bottles, and short- and long-term stability monitoring was performed by T-test to check if there was significant degradation at the delivery temperature of under 40 °C (14 days) and at 0-4 °C storage condition (18 months), respectively. After joint evaluation by ten laboratories, Dixion and Cochran statistical analyses were presented. The expanded uncertainties were calculated based on the uncertainty of homogeneity, short- and long-term stability, and inter-laboratory validation containing factor k = 2. It found that the four reference materials were homogenous and stable, and had the AAC (g/100 g, k = 2) of 2.96 ± 1.01, 10.68 ± 0.66, 17.18 ± 1.04, and 16.09 ± 1.29, respectively, at 620 nm, and 1.46 ± 0.49, 10.44 ± 0.56, 16.82 ± 0.75, and 24.33 ± 0.52, respectively, at 720 nm. It was indicated that 720 nm was more suitable for the determination of rice AAC with lower uncertainties. The determinations of the AAC of 11 rice varieties were carried out by two methods, the method without defatting and with calibration from the four rice reference materials and the method with a defatting procedure and calibrating from potato amylose and waxy rice amylopectin. It confirmed that the undefatted rice reference materials could achieve satisfactory results to test the rice samples with the AAC ranging from 1 to 25 g/100 g. It would greatly reduce the time cost and improve testing efficiency and applicability, and provide technical support for the high-quality development of the rice industry.

Project description:BackgroundIn collaboration with the Office of Dietary Supplements at the National Institutes of Health, the National Institute of Standards and Technology issued a suite of botanical matrix reference materials (RMs) and Standard Reference Material® (SRM) for determination of isoflavones and toxic elements in kudzu dietary supplement ingredients.ObjectiveRM 8650 Pueraria montana var. lobata (Kudzu) Rhizome, SRM 3268 Pueraria montana var. lobata (Kudzu) Extract, and RM 8652 Kudzu-Containing Solid Oral Dosage Form were issued with values assigned for isoflavones (puerarin, daidzin, and daidzein), toxic elements (arsenic, cadmium, and lead), and selenium.MethodsIsoflavone values were assigned using liquid chromatography with UV absorbance or mass spectrometry detection. Element values were assigned using inductively coupled plasma mass spectrometry and results from an interlaboratory comparison exercise.ResultsMass fractions for puerarin were 32.2 ± 3.2 mg/g, 128 ± 13 mg/g, and 68.2 ± 6.9 mg/g in RM 8650, SRM 3268, and RM 8652, respectively. Arsenic increases from 156 ± 14 ng/g to 849 ± 83 ng/g and cadmium decreases from 348 ± 14 ng/g to 82.1 ± 4.9 ng/g from rhizome to extract.ConclusionThe kudzu RM/SRM suite complements previously issued soy-related SRMs with values assigned for isoflavones, which have been studied for their potential health benefits, and expands the analytical resource by providing values for puerarin, an isoflavone not found in soy.HighlightsThe three new kudzurmaterials are for use in the determination of isoflavones, toxic elements, and selenium. For the isoflavones, these new kudzu materials provide higher levels of daidzin and daidzein than existing soy-related SRMs, and they provide a value for an isoflavone not in existing SRMs (puerarin). Toxic elements in RM 8650 and SRM 3268 provide new botanical matrixes for use by dietary supplement manufacturers for the verification of the safety of their raw materials.

Project description:For over 40 years, food-matrix certified reference materials (CRMs) have been available for determination of trace element content, and a wide variety of materials are available from most producers of CRMs. However, the availability of food-matrix CRMs for organic nutrients has been more limited. The European Commission (EC) Bureau Communautaire de Référence (BCR) and the National Institute of Standards and Technology (NIST) introduced food-matrix CRMs with values assigned for vitamins and other organic nutrients such as fatty acids and carotenoids in the 1990s. The number of organic nutrients for which values were assigned has increased significantly in the past decade, and the approach and analytical methods used for assignment of the certified values have also evolved. Recently, dietary supplement-matrix CRMs such as multivitamin tablets with values assigned for vitamins and carotenoids, and fish and plant oils with values assigned for fatty acids have appeared. The development, evolution, and improvement of food- and dietary supplement-matrix CRMs for determination of vitamins, carotenoids, and fatty acids are described, with emphasis on CRMs made available in the past 10 years. Recent food and dietary supplement CRMs for the determination of organic nutrients include infant formula, multivitamin tablets, milk and egg powders, breakfast cereal, meat homogenate, blueberries, soy flour, fish and plant oils, dry cat food, and protein drink powder. Many of these food- and supplement-matrix CRMs have values assigned for over 80 organic and inorganic nutrients, toxic elements, proximates, and contaminants. The review provides a critical assessment of the challenges and evolving improvements in the production and the analytical methods used for value assignment of these CRMs. The current status and future needs for additional food- and dietary supplement-matrix CRMs for organic nutrients are also discussed. Graphical abstract Food Composition Triangle with currently-available food-matrix certified reference materials (CRMs) for the determination of organic nutrients positioned according to fat, protein, and carbohydrate composition.

Project description:Four mineral oil certified reference materials (CRMs), NMIJ CRM 7902-a, CRM 7903-a, CRM 7904-a, and CRM 7905-a, have been issued by the National Metrology Institute of Japan, which is part of the National Institute of Advanced Industrial Science and Technology (NMIJ/AIST), for the determination of polychlorinated biphenyls (PCBs). The raw materials for the CRMs were an insulation oil (CRM 7902-a and CRM 7903-a) and a fuel oil (CRM7904-a and CRM 7905-a). A solution of PCB3, PCB8, and technical PCB products, comprising four types of Kaneclor, was added to the oil matrices. The total PCB concentrations in the PCB-fortified oils (CRM 7902-a and CRM 7904-a) are approximately 6 mg kg(-1). In addition, the mineral oils which were not fortified with PCBs were also distributed as CRMs (CRM 7903-a and CRM 7905-a). Characterization of these CRMs was conducted by the NMIJ/AIST, where the mineral oils and the PCB solution were analyzed using multiple analytical methods such as dimethylsulfoxide extraction, normal-phase liquid chromatography, gel permeation chromatography, reversed-phase liquid chromatography, and chromatography using sulfoxide-bonded silica; and/or various capillary columns for gas chromatography, and two ionization modes for mass spectrometry. The target compounds in the mineral oils and those in the PCB solution were determined by one of the primary methods of measurement, isotope dilution-mass spectrometry (ID-MS). Certified values have been provided for 11 PCB congeners (PCB3, 8, 28, 52, 101, 118, 138, 153, 180, 194, and 206) in the CRMs. These CRMs have information values for PCB homologue concentrations determined by using a Japanese official method for determination of PCBs in wastes and densities determined with an oscillational density meter. Because oil samples having arbitrary PCB concentrations between respective property values of the PCB-fortified and nonfortified CRMs can be prepared by gravimetric mixing of the CRM pairs, these CRMs can be used for validation of PCB analyses using various instruments which have different sensitivities.

Dataset Information

Determination of Cholesterol Content in Butter by HPLC: Up-to-Date Optimization, and In-House Validation Using Reference Materials.

Publications

Determination of Cholesterol Content in Butter by HPLC: Up-to-Date Optimization, and In-House Validation Using Reference Materials.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets