Dataset Information

Study of Partial Oxidation of Methane by Ni/Al2O3 Catalyst: Effect of Support Oxides of Mg, Mo, Ti and Y as Promoters.

ABSTRACT: Catalysts of 10% Ni, supported on promoted alumina, were used to accomplish the partial oxidation of methane. The alumina support was doped with oxides of Mo, Mg, Ti and Y. An incipient wetness impregnation technique was used to synthesize the catalysts. The physicochemical properties of the catalysts were described by XRD, H2-TPR (temperature programmed reduction), BET, TGA, CO2-TPD (temperature-programmed desorption) and Raman. The characterization results denoted that Ni has a strong interaction with the support. The TGA investigation of spent catalysts displayed the anticoking enhancement of the promoters. The impact of the support promoters on the catalyst stability, methane conversion and H2 yield was inspected. Stability tests were done for 460 min. The H2 yields were 76 and 60% and the CH4 conversions were 67 and 92%, respectively, over Ni/Al2O3+Mg, when the reaction temperatures were 550 and 650 °C, respectively. The performance of the present work was compared to relevant findings in the literature.

SUBMITTER: Ibrahim AA

PROVIDER: S-EPMC7663497 | biostudies-literature | 2020 Oct

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Study of Partial Oxidation of Methane by Ni/Al2O3 Catalyst: Effect of Support Oxides of Mg, Mo, Ti and Y as Promoters.

Ibrahim Ahmed A AA Khan Wasim U WU Al-Mubaddel Fahad F Al-Fatesh Ahmed S AS Kasim Samsudeen O SO Mahmud Sofiu L SL Al-Zahrani Ateyah A AA Siddiqui M Rafiq H MRH Fakeeha Anis H AH

Molecules (Basel, Switzerland) 20201029 21

Catalysts of 10% Ni, supported on promoted alumina, were used to accomplish the partial oxidation of methane. The alumina support was doped with oxides of Mo, Mg, Ti and Y. An incipient wetness impregnation technique was used to synthesize the catalysts. The physicochemical properties of the catalysts were described by XRD, H2-TPR (temperature programmed reduction), BET, TGA, CO2-TPD (temperature-programmed desorption) and Raman. The characterization results denoted that Ni ...[more]

PMID: 33138289

Similar Datasets

Project description:A better fundamental understanding of the plasma-catalyst interaction and the reaction mechanism is vital for optimizing the design of catalysts for ammonia synthesis by plasma-catalysis. In this work, we report on a hybrid plasma-enhanced catalytic process for the synthesis of ammonia directly from N2 and H2 over transition metal catalysts (M/Al2O3, M = Fe, Ni, Cu) at near room temperature (?35 °C) and atmospheric pressure. Reactions were conducted in a specially designed coaxial dielectric barrier discharge (DBD) plasma reactor using water as a ground electrode, which could cool and maintain the reaction at near-room temperature. The transparency of the water electrode enabled operando optical diagnostics (intensified charge-coupled device (ICCD) imaging and optical emission spectroscopy) of the full plasma discharge area to be conducted without altering the operation of the reactor, as is often needed when using coaxial reactors with opaque ground electrodes. Compared to plasma synthesis of NH3 without a catalyst, plasma-catalysis significantly enhanced the NH3 synthesis rate and energy efficiency. The effect of different transition metal catalysts on the physical properties of the discharge is negligible, which suggests that the catalytic effects provided by the chemistry of the catalyst surface are dominant over the physical effects of the catalysts in the plasma-catalytic synthesis of ammonia. The highest NH3 synthesis rate of 471 ?mol g-1 h-1 was achieved using Ni/Al2O3 as a catalyst with plasma, which is 100% higher than that obtained using plasma only. The presence of a transition metal (e.g., Ni) on the surface of Al2O3 provided a more uniform plasma discharge than Al2O3 or plasma only, and enhanced the mean electron energy. The mechanism of plasma-catalytic ammonia synthesis has been investigated through operando plasma diagnostics combined with comprehensive characterization of the catalysts using N2 physisorption measurements, X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), high-resolution transmission electron microscopy (HRTEM), NH3-temperature-programmed desorption (TPD), and N2-TPD. Four forms of adsorbed NH x (x = 0, 1, 2, and 3) species were detected on the surfaces of the spent catalysts using XPS. It was found that metal sites and weak acid sites could enhance the production of NH3 via formation of NH2 intermediates on the surface.

Dataset Information

Study of Partial Oxidation of Methane by Ni/Al2O3 Catalyst: Effect of Support Oxides of Mg, Mo, Ti and Y as Promoters.

Publications

Study of Partial Oxidation of Methane by Ni/Al<sub>2</sub>O<sub>3</sub> Catalyst: Effect of Support Oxides of Mg, Mo, Ti and Y as Promoters.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets