Browse
Submit Data
Databases
API
Help

Dataset Information

7 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Nanostructured Silica with Anchoring Units: The 2D Solid Solvent for Molecules and Metal Ions.

ABSTRACT: The ability to organize, separate and manipulate individual molecules and ions on a surface opens up almost unlimited opportunities. However, it often requires complex techniques and a proper support material. With this in mind, we show a new concept of 2D solid solvents and review a simple and efficient procedure which is based on nanostructured forms of silica with anchoring units. We describe silica supports, such as spherical nanoparticles and mesoporous silica structures, as well as review the methods for chemical modification of the surface of silica with the functional groups. Finally, we present a few particular examples of the immobilization of molecules and ions on the surface of 2D solid solvents along with the experimental investigation of the obtained materials.

SUBMITTER: Laskowska M

PROVIDER: S-EPMC7663599 | biostudies-literature | 2020 Oct

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Nanostructured Silica with Anchoring Units: The 2D Solid Solvent for Molecules and Metal Ions.

Laskowska Magdalena M Pastukh Oleksandr O Fedorchuk Andrii A Schabikowski Mateusz M Kowalczyk Paweł P Zalasiński Marcin M Laskowski Łukasz Ł

International journal of molecular sciences 20201030 21

The ability to organize, separate and manipulate individual molecules and ions on a surface opens up almost unlimited opportunities. However, it often requires complex techniques and a proper support material. With this in mind, we show a new concept of 2D solid solvents and review a simple and efficient procedure which is based on nanostructured forms of silica with anchoring units. We describe silica supports, such as spherical nanoparticles and mesoporous silica structures, as well as review ...[more]

PMID: 33143359

Similar Datasets

Nanostructured and Photochromic Material for Environmental Detection of Metal Ions.

Project description:Compared to conventional spectroscopy or chromatography analysis, chemical sensing based on colorimetric changes offers an alternative to monitor potential metal hazards in aqueous environment through rapid and low-cost colorimetric changes which can be easily interpreted. In this work poly(ethylene glycol) (PEG 2000) was modified with a carboxylic acid spiropyran (SPCOOH) derivate by Steglich esterification (PEGSP2). PEGSP2 was incorporated into a poly(-caprolactone) (PCL) polymer matrix by electrospinning technique to produce nanofibers with photochromic properties. Spectroscopic analysis, thermal gravimetric analysis (TGA), and differential scanning calorimetry (DSC) were used to characterize PEGSP2. Drop shape analysis (DSA) and scanning electronic microscopy (SEM) were used to characterize the electrospun (ES) nanofibers morphology. Several metal ions solutions relevant to environmental hazards were prepared to be spotted on the surface of ES nanofibers for photochromatic sensing. Among them, Mg2+, Ca2+, Zn2+, Cd2+, La3+, and Er3+ demonstrated orange fluorescence when exposed to UV light. ES nanofibers also presented higher wettability when compared to a pure PCL polymer matrix, which is critical for sensitivity. Eighteen metals ions could be detected on the electrospun material. Additionally, among all metal ions Fe3+ was the most sensitive one in solution, in a µmol L1 range.

| S-EPMC6930475 | biostudies-literature

2D Porphyrinic Metal-Organic Frameworks Featuring Rod-Shaped Secondary Building Units.

Project description:Metal-organic frameworks (MOFs) encompass a rapidly expanding class of materials with diverse potential applications including gas storage, molecular separation, sensing and catalysis. So-called 'rod MOFs', which comprise infinitely extended 1D secondary building units (SBUs), represent an underexplored subclass of MOF. Further, porphyrins are considered privileged ligands for MOF synthesis due to their tunable redox and photophysical properties. In this study, the CuII complex of 5,15-bis(4-carboxyphenyl)-10,20-diphenylporphyrin (H2L-CuII, where H2 refers to the ligand's carboxyl H atoms) is used to prepare two new 2D porphyrinic rod MOFs PROD-1 and PROD-2. Single-crystal X-ray analysis reveals that these frameworks feature 1D MnII- or CoII-based rod-like SBUs that are coordinated by labile solvent molecules and photoactive porphyrin moieties. Both materials were characterised using infrared (IR) spectroscopy, powder X-ray diffraction (PXRD) spectroscopy and thermogravimetric analysis (TGA). The structural attributes of PROD-1 and PROD-2 render them promising materials for future photocatalytic investigations.

| S-EPMC8156857 | biostudies-literature

Optical Quantification of Metal Ions Using Plasmonic Nanostructured Microbeads Coated with Metal-Organic Frameworks and Ion-Selective Dyes.

Project description:Herein, we designed and synthesized a hybrid material comprising polystyrene submicrobeads coated with silver nanospheres. This material provides a dense collection of electromagnetic hot spots upon illumination with visible light. The subsequent coating with a metal-framework and the adsorption of bathocuproine on it yield an optical sensor for SERS that can specifically detect Cu(II) in a variety of aqueous samples at the ultratrace level. Detection limits with this method are superior to those of induced coupled plasma or atomic absorption and comparable with those obtained with induced coupled plasma coupled with a mass detector.

| S-EPMC10288605 | biostudies-literature

Nanostructured Polymethylsiloxane/Fumed Silica Blends.

Project description:Polymethylsiloxane (PMS) and fumed silica, alone and in a blended form (1:1 w/w), differently pretreated, hydrated, and treated again, were studied using TEM and SEM, nitrogen adsorption-desorption, 1H MAS and 29Si CP/MAS NMR spectroscopy, infrared spectroscopy, and methods of quantum chemistry. Analysis of the effects of adding water (0-0.5 g of water per gram of solids) to the blends while they are undergoing different mechanical treatment (stirring with weak (~1-2 kg/cm2) and strong (~20 kg/cm2) loading) show that both dry and wetted PMS (as a soft material) can be grafted onto a silica surface, even with weak mechanical loading, and enhanced mechanical loading leads to enhanced homogenization of the blends. The main evidence of this effect is strong nonadditive changes in the textural characteristics, which are 2-3 times smaller than additive those expected. All PMS/nanosilica blends, demonstrating a good distribution of nanosilica nanoparticles and their small aggregates in the polymer matrix (according to TEM and SEM images), are rather meso/microporous, with the main pore-size distribution peaks at R > 10 nm in radius and average <RV> values of 18-25 nm. The contributions of nanopores (R < 1 nm), mesopores (1 nm < R < 25 nm), and macropores (25 nm < R < 100 nm), which are of importance for studied medical sorbents and drug carriers, depend strongly on the types of the materials and treatments, as well the amounts of water added. The developed technique (based on small additions of water and controlled mechanical loading) allows one to significantly change the morphological and textural characteristics of fumed silica (hydrocompaction), PMS (drying-wetting-drying), and PMS/A-300 blends (wetting-drying under mechanical loading), which is of importance from a practical point of view.

| S-EPMC6695803 | biostudies-literature

Preparation of Various Nanomaterials via Controlled Gelation of a Hydrophilic Polymer Bearing Metal-Coordination Units with Metal Ions.

Project description:We investigated the gelation of a hydrophilic polymer with metal-coordination units (HPMC) and metal ions (PdII or AuIII). Gelation proceeded by addition of an HPMC solution in N-methyl-2-pyrrolidone (NMP) to a metal ion aqueous solution. An increase in the composition ratio of the metal-coordination units from 10 mol% to 34 mol% (HPMC-34) increased the cross-linking rate with AuIII. Cross-linking immediately occurred after dropwise addition of an HPMC-34 solution to the AuIII solution, generating the separation between the phases of HPMC-34 and AuIII. The cross-linking of AuIII proceeded from the surface to the inside of the HPMC-34 droplets, affording spherical gels. In contrast, a decrease in the ratio of metal-coordination units from 10 mol% to 4 mol% (HPMC-4) decreased the PdII cross-linking rate. The cross-linking occurred gradually and the gels extended to the bottom of the vessel, forming fibrous gels. On the basis of the mechanism for the formation of gels with different morphologies, the gelation of HPMC-34 and AuIII provided nanosheets via gelation at the interface between the AuIII solution and the HPMC-34 solution. The gelation of HPMC-4 and PdII afforded nanofibers by a facile method, i.e., dropwise addition of the HPMC-4 solution to the PdII solution. These results demonstrated that changing the composition ratio of the metal-coordination units in HPMC can control the gelation behavior, resulting in different types of nanomaterials.

| S-EPMC9322127 | biostudies-literature

Anionic Anchoring Enhanced Quasi Solid Composite Polymer Electrolytes for High Performance Lithium Metal Battery.

Project description:Herein, ZIF-8 inorganic particles with different sized reinforced poly (vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP) solid composite polymer electrolytes (PVDF-HFP/10%ZIF-8) were prepared via a facile blade-coating approach, and free-standing quasi solid-state composite electrolytes (PVDF-HFP/10%ZIF-8(0.6)/Plasticizer, abbreviated as PH/10%ZIF-8(0.6)/P), were further obtained through the introduction of plasticizer. Optimized PH/10%ZIF-8(0.6)/P exhibited a high ionic conductivity of 2.8 × 10-4 S cm-1 at 30 °C, and superior Li+ transfer number of 0.89 with an ultrathin thickness (26 µm). Therefore, PH/10%ZIF-8(0.6)/P could effectively inhibit the growth of lithium dendrites, and the assembled Li/LiFePO4 cell delivered good cycling stability with a capacity retention rate of 89.1% after 100 cycles at 0.5 C.

| S-EPMC10748324 | biostudies-literature

2D MXene-containing polymer electrolytes for all-solid-state lithium metal batteries.

Project description:Nanocomposite polymer electrolytes (CPEs) are promising materials for all-solid-state lithium metal batteries (LMBs) due to their enhanced ionic conductivities and stability to the lithium anode. MXenes are a new two-dimensional, 2D, family of early transition metal carbides and nitrides, which have a high aspect ratio and a hydrophilic surface. Herein, using a green, facile aqueous solution blending method, we uniformly dispersed small amounts of Ti3C2T x into a poly(ethylene oxide)/LiTFSI complex (PEO20-LiTFSI) to fabricate MXene-based CPEs (MCPEs). The addition of the 2D flakes to PEO simultaneously retards PEO crystallization and enhances its segmental motion. Compared to the 0D and 1D nanofillers, MXenes show higher efficiency in ionic conductivity enhancement and improvement in the performance of LMBs. The CPE with 3.6 wt% MXene shows the highest ionic conductivity at room temperature (2.2 × 10-5 S m-1 at 28 °C). An LMB using MCPE with only 1.5 wt% MXene shows rate capability and stability comparable with that of the state-of-the-art CPELMBs. We attribute the excellent performance to the 2D geometry of the filler, the good dispersion of the flakes in the polymer matrix, and the functional group-rich surface.

| S-EPMC9473207 | biostudies-literature

Multi-functional flexible 2D carbon nanostructured networks.

Project description:Two-dimensional network-structured carbon nanoscale building blocks, going beyond graphene, are of fundamental importance, and creating such structures and developing their applications have broad implications in environment, electronics and energy. Here, we report a facile route, based on electro-spraying/netting, to self-assemble two-dimensional carbon nanostructured networks on a large scale. Manipulation of the dynamic ejection, deformation and assembly of charged droplets by control of Taylor cone instability and micro-electric field, enables the creation of networks with characteristics combining nanoscale diameters of one-dimensional carbon nanotube and lateral infinity of two-dimensional graphene. The macro-sized (meter-level) carbon nanostructured networks show extraordinary nanostructural properties, remarkable flexibility (soft polymeric mechanics having hard inorganic matrix), nanoscale-level conductivity, and outstanding performances in distinctly different areas like filters, separators, absorbents, and wearable electrodes, supercapacitors and cells. This work should make possible the innovative design of high-performance, multi-functional carbon nanomaterials for various applications.

| S-EPMC7550567 | biostudies-literature

Theory and Modeling of RNA Structure and Interactions with Metal Ions and Small Molecules.

Project description:In addition to continuous rapid progress in RNA structure determination, probing, and biophysical studies, the past decade has seen remarkable advances in the development of a new generation of RNA folding theories and models. In this article, we review RNA structure prediction models and models for ion-RNA and ligand-RNA interactions. These new models are becoming increasingly important for a mechanistic understanding of RNA function and quantitative design of RNA nanotechnology. We focus on new methods for physics-based, knowledge-based, and experimental data-directed modeling for RNA structures and explore the new theories for the predictions of metal ion and ligand binding sites and metal ion-dependent RNA stabilities. The integration of these new methods with theories about the cellular environment effects in RNA folding, such as molecular crowding and cotranscriptional kinetic effects, may ultimately lead to an all-encompassing RNA folding model.

| S-EPMC5508874 | biostudies-literature

Epitaxial Growth of Nanostructured Li<sub>2</sub> Se on Lithium Metal for All Solid-State Batteries.

Project description:Lithium is considered to be the ultimate anode material for high energy-density rechargeable batteries. Recent emerging technologies of all solid-state batteries based on sulfide-based electrolytes raise hope for the practical use of lithium, as it is likely to suppress lithium dendrite growth. However, such devices suffer from undesirable side reactions and a degradation of electrochemical performance. In this work, nanostructured Li2 Se epitaxially grown on Li metal by chemical vapor deposition are investigated as a protective layer. By adjusting reaction time and cooling rate, a morphology of as-prepared Li2 Se is controlled, resulting in nanoparticles, nanorods, or nanowalls with a dominant (220) plane parallel to the (110) plane of the Li metal substrate. Uniaxial pressing the layers under a pressure of 50 MPa for a cell preparation transforms more compact and denser. Dual compatibility of the Li2 Se layers with strong chemical bonds to Li metal and uniform physical contact to a Li6 PS5 Csulfide electrolyte prevents undesirable side reactions and enables a homogeneous charge transfer at the interface upon cycling. As a result, a full cell coupled with a LiCoO2 -based cathode shows significantly enhanced electrochemical performance and demonstrates the practical use of Li anodes with Li2 Se layers for all solid-state battery applications.

| S-EPMC8188223 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data