Browse
Submit Data
Databases
API
Help

Dataset Information

20 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Paper-based pump-free magnetophoresis.

ABSTRACT: Microfluidic magnetophoresis is a powerful technique that is used to separate and/or isolate cells of interest from complex matrices for analysis. However, mechanical pumps are required to drive flow, limiting portability and making translation to point-of-care (POC) settings difficult. Microfluidic paper-based analytical devices (μPADs) offer an alternative to traditional microfluidic devices that do not require external pumps to generate flow. However, μPADs are not typically used for particle analysis because most particles become trapped in the porous fiber network. Here we report the ability of newly developed fast-flow microfluidic paper-based analytical devices (ffPADs) to perform magnetophoresis. ffPADs use capillary action in a gap between stacked layers of paper and transparency sheets to drive flow at higher velocities than traditional μPADs. The multi-layer ffPADs allow particles and cells to move through the gap without being trapped in the paper layers. We first demonstrate that ffPADs enable magnetic particle separations in a μPAD with a neodymium permanent magnet and study key factors that affect performance. To demonstrate utility, E. coli was used as a model analyte and was isolated from human urine before detection with a fluorescently labeled antibody. A capture efficiency of 61.5% was then obtained of E. coli labeled magnetic beads in human urine. Future studies will look at the improvement of the capture efficiency and to make this assay completely off-chip without the need of a fluorescent label. The assay and device described here demonstrate the first example of magnetophoresis in a paper based, pump free microfluidic device.

SUBMITTER: Call ZD

PROVIDER: S-EPMC7666097 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Formation of ordered cellular structures in suspension via label-free negative magnetophoresis.

Project description:The creation of ordered cellular structures is important for tissue engineering research. Here, we present a novel strategy for the assembly of cells into linear arrangements by negative magnetophoresis using inert, cytocompatible magnetic nanoparticles. In this approach, magnetic nanoparticles dictate the cellular assembly without relying on cell binding or uptake. The linear cell structures are stable and can be further cultured without the magnetic field or nanoparticles, making this an attractive tool for tissue engineering.

| S-EPMC2681786 | biostudies-literature

FREE PAPER POSTERS

Project description: Not available

| S-EPMC5324351 | biostudies-literature

Paper pump for passive and programmable transport.

Project description:In microfluidic systems, a pump for fluid-driving is often necessary. To keep the size of microfluidic systems small, a pump that is small in size, light-weight and needs no external power source is advantageous. In this work, we present a passive, simple, ultra-low-cost, and easily controlled pumping method based on capillary action of paper that pumps fluid through conventional polymer-based microfluidic channels with steady flow rate. By using inexpensive cutting tools, paper can be shaped and placed at the outlet port of a conventional microfluidic channel, providing a wide range of pumping rates. A theoretical model was developed to describe the pumping mechanism and aid in the design of paper pumps. As we show, paper pumps can provide steady flow rates from 0.3 μl/s to 1.7 μl/s and can be cascaded to achieve programmable flow-rate tuning during the pumping process. We also successfully demonstrate transport of the most common biofluids (urine, serum, and blood). With these capabilities, the paper pump has the potential to become a powerful fluid-driving approach that will benefit the fielding of microfluidic systems for point-of-care applications.

| S-EPMC3579862 | biostudies-other

Pump-Free Microfluidic Hemofiltration Device.

Project description:Hemofiltration removes water and small molecules from the blood via nanoporous filtering membranes. This paper discusses a pump-free hemofiltration device driven by the pressure difference between the artery and the vein. In the design of the filtering device, oncotic pressure needs to be taken into consideration. Transmembrane pressure (TMP) determines the amount and direction of hemofiltration, which is calculated by subtracting the oncotic pressure from the blood pressure. Blood pressure decreases as the channels progress from the inlet to the outlet, while oncotic pressure increases slightly since no protein is removed from the blood to the filtrate in hemofiltration. When TMP is negative, the filtrate returns to the blood, i.e., backfiltration takes place. A small region of the device with negative TMP would thus result in a small amount of or even zero filtrates. First, we investigated this phenomenon using in vitro experiments. We then designed a hemofiltration system taking backfiltration into consideration. We divided the device into two parts. In the first part, the device has channels for the blood and filtrate with a nanoporous membrane. In the second part, the device does not have channels for filtration. This design ensures TMP is always positive in the first part and prevents backfiltration. The concept was verified using in vitro experiments and ex vivo experiments in beagle dogs. Given the simplicity of the device without pumps or electrical components, the proposed pump-free hemofiltration device may prove useful for either implantable or wearable hemofiltration.

| S-EPMC8401791 | biostudies-literature

Paper-based fluorogenic RNA aptamer sensors for label-free detection of small molecules.

Project description:Sensors based on fluorogenic RNA aptamers have emerged in recent years. These sensors have been used for in vitro and intracellular detection of a broad range of biological and medical targets. However, the potential application of fluorogenic RNA-based sensors for point-of-care testing is still little studied. Here, we report a paper substrate-based portable fluorogenic RNA sensor system. Target detection can be simply performed by rehydration of RNA sensor-embedded filter papers. This affordable sensor system can be used for the selective, sensitive, and rapid detection of different target analytes, such as antibiotics and cellular signaling molecules. We believe that these paper-based fluorogenic RNA sensors show great potential for point-of-care testing of a wide range of targets from small molecules, nucleic acids, proteins, to various pathogens.

| S-EPMC7747226 | biostudies-literature

Low-cost detection of norovirus using paper-based cell-free systems and synbody-based viral enrichment.

Project description:Noroviruses are a primary cause of gastroenteritis and foodborne illness with cases that affect millions of people worldwide each year. Inexpensive tests for norovirus that do not require sophisticated laboratory equipment are important tools for ensuring that patients receive timely treatment and for containing outbreaks. Herein, we demonstrate a low-cost colorimetric assay that detects norovirus from clinical samples by combining paper-based cell-free transcription-translation systems, isothermal amplification and virus enrichment by synbodies. Using isothermal amplification and cell-free RNA sensing with toehold switches, we demonstrate that the assay enables detection of norovirus GII.4 Sydney from stool down to concentrations of 270 aM in reactions that can be directly read by eye. Furthermore, norovirus-binding synbodies and magnetic beads are used to concentrate the virus and provide a 1000-fold increase in assay sensitivity extending its detection limit to 270 zM. These results demonstrate the utility of paper-based cell-free diagnostic systems for identification of foodborne pathogens and provide a versatile diagnostic assay that can be applied to the concentration, amplification and detection of a broad range of infectious agents.

| S-EPMC6195790 | biostudies-literature

Simple and Equipment-Free Paper-Based Device for Determination of Mercury in Contaminated Soil.

Project description:This work presents a simple and innovative protocol employing a microfluidic paper-based analytical device (µPAD) for equipment-free determination of mercury. In this method, mercury (II) forms an ionic-association complex of tetraiodomercurate (II) ion (HgI42-(aq)) using a known excess amount of iodide. The residual iodide flows by capillary action into a second region of the paper where it is converted to iodine by pre-deposited iodate to liberate I2(g) under acidic condition. Iodine vapor diffuses across the spacer region of the µPAD to form a purple colored of tri-iodide starch complex in a detection zone located in a separate layer of the µPAD. The digital image of the complex is analyzed using ImageJ software. The method has a linear calibration range of 50-350 mg L-1 Hg with the detection limit of 20 mg L-1. The method was successfully applied to the determination of mercury in contaminated soil and water samples which the results agreed well with the ICP-MS method. Three soil samples were highly contaminated with mercury above the acceptable WHO limits (0.05 mg kg-1). To the best of our knowledge, this is the first colorimetric µPAD method that is applicable for soil samples including mercury contaminated soils from gold mining areas.

| S-EPMC8037038 | biostudies-literature

Continuous Microfluidic Purification of DNA Using Magnetophoresis.

Project description:Automatic microfluidic purification of nucleic acid is predictable to reduce the input of original samples and improve the throughput of library preparation for sequencing. Here, we propose a novel microfluidic system using an external NdFeB magnet to isolate DNA from the polymerase chain reaction (PCR) mixture. The DNA was purified and isolated when the DNA-carrying beads transported to the interface of multi-laminar flow under the influence of magnetic field. Prior to the DNA recovery experiments, COMSOL simulations were carried out to study the relationship between trajectory of beads and magnet positions as well as fluid velocities. Afterwards, the experiments to study the influence of varying velocities and input of samples on the DNA recovery were conducted. Compared to experimental results, the relative error of the final position of beads is less than 10%. The recovery efficiency decreases with increase of input or fluid velocity, and the maximum DNA recovery efficiency is 98.4% with input of l00 ng DNA at fluid velocity of 1.373 mm/s. The results show that simulations significantly reduce the time for parameter adjustment in experiments. In addition, this platform uses a basic two-layer chip to realize automatic DNA isolation without any other liquid switch value or magnet controller.

| S-EPMC7074667 | biostudies-literature

Paper-Based Analytical Device for Zinc Ion Quantification in Water Samples with Power-Free Analyte Concentration

Project description: Not available

| S-EPMC6189703 | biostudies-literature

Constitutive relationship and governing physical properties for magnetophoresis.

Project description:Magnetophoresis is an important physical process with application to drug delivery, biomedical imaging, separation, and mixing. Other than empirically, little is known about how the magnetic field and magnetic properties of a solution affect the flux of magnetic particles. A comprehensive explanation of these effects on the transport of magnetic particles has not been developed yet. Here we formulate a consistent, constitutive equation for the magnetophoretic flux of magnetic nanoparticles suspended in a medium exposed to a stationary magnetic field. The constitutive relationship accounts for contributions from magnetic diffusion, magnetic convection, residual magnetization, and electromagnetic drift. We discovered that the key physical properties governing the magnetophoresis are magnetic diffusion coefficient, magnetic velocity, and activity coefficient, which depend on relative magnetic energy and the molar magnetic susceptibility of particles. The constitutive equation also reveals previously unknown ballistic and diffusive limits for magnetophoresis wherein the paramagnetic particles either aggregate near the magnet or diffusive away from the magnet, respectively. In the diffusive limit, the particle concentration is linearly proportional to the relative magnetic energy of the suspension of paramagnetic particles. The region of the localization of paramagnetic particles near the magnet decreases with increasing the strength of the magnet. The dynamic accumulation of nanoparticles, measured as the thickness of the nanoparticle aggregate, near the magnet compares well with the theoretical prediction. The effect of convective mixing on the rate of magnetophoresis is also discussed for the magnetic targeting applications.

| S-EPMC7720172 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data