Dataset Information

Effects of coffee roasting technologies on cup quality and bioactive compounds of specialty coffee beans.

ABSTRACT: The effects of drum, fluidized bed, and traditional type of coffee roasting technologies on the cup quality and bioactive compounds of Yirgacheffe, Harar, and Sidama variety specialty coffee beans grown in Ethiopia were investigated at light, medium, and dark degree of roast from 150°C to 200°C for 7 to 15 min. No significant differences in cup quality were detected among the roasted coffee varieties disregard of the type of roasters. Varietal difference was found to have significant (p < .05) effect on caffeine content of the coffee beans. A significant reduction in trigonelline and total chlorogenic acids content of the coffee beans was observed during roasting process, with darker roasts attaining the least values. Drum roaster was found to be the best type of coffee roaster for specialty coffee beans at medium degree of roast with the highest cup quality, optimum bioactive compounds content, and minimum acrylamide formation. However, traditional roaster resulted at the least average cup score of 80% among the three coffee samples and the highest acrylamide content of 2.306 mg/L for Yirgacheffe coffee sample at light degree of roast. There are still some bottlenecks that need to be addressed via advancements using novel food processing technologies in order to devise the next generation of coffee processing.

SUBMITTER: Bolka M

PROVIDER: S-EPMC7684626 | biostudies-literature | 2020 Nov

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Effects of coffee roasting technologies on cup quality and bioactive compounds of specialty coffee beans.

Bolka Muluken M Emire Shimelis S

Food science & nutrition 20201008 11

The effects of drum, fluidized bed, and traditional type of coffee roasting technologies on the cup quality and bioactive compounds of Yirgacheffe, Harar, and Sidama variety specialty coffee beans grown in Ethiopia were investigated at light, medium, and dark degree of roast from 150°C to 200°C for 7 to 15 min. No significant differences in cup quality were detected among the roasted coffee varieties disregard of the type of roasters. Varietal difference was found to have significant (<i>p</i> < ...[more]

PMID: 33282263

Similar Datasets

Project description:Over the last decade, concerns have been raised about potential respiratory health effects associated with occupational exposure to the flavoring additives diacetyl and 2,3-pentanedione. Both of these diketones are also natural components of many foods and beverages, including roasted coffee. To date, there are no published studies characterizing workplace exposures to these diketones during commercial roasting and grinding of unflavored coffee beans. In this study, we measured naturally occurring diacetyl, 2,3-pentanedione, and respirable dust at a facility that roasts and grinds coffee beans with no added flavoring agents. Sampling was conducted over the course of three roasting batches and three grinding batches at varying distances from a commercial roaster and grinder. The three batches consisted of lightly roasted soft beans, lightly roasted hard beans, and dark roasted hard beans. Roasting occurred for 37 to 41 min, and the grinding process took between 8 and 11 min. Diacetyl, 2,3-pentanedione, and respirable dust concentrations measured during roasting ranged from less than the limit of detection (<LOD) to 0.0039 ppm, <LOD to 0.018 ppm, and <LOD to 0.31 mg/m3, respectively. During grinding, diacetyl, 2,3-pentanedione, and respirable dust concentrations ranged from 0.018 to 0.39 ppm, 0.0089 to 0.21 ppm, and <LOD to 1.7 mg/m3, respectively. For any given bean/roast combination and sample location, diketone concentrations during grinding were higher than those measured during roasting. During grinding, concentrations decreased with increased distance from the source. Measured concentrations of both diketones were higher during grinding of soft beans than hard beans. The results indicate that airborne concentrations of naturally occurring diacetyl and 2,3-pentanedione associated with unflavored coffee processing: (1) are similar to the concentrations that have been measured in food flavoring facilities; (2) are likely to exceed some recommended short-term occupational exposure limits, but; (3) based on previous analyses of exposure response relationships in animal studies, are far below the concentrations that are expected to cause even minimal responses in the human respiratory tract.

Project description:Roasted coffee and many coffee flavorings emit volatile organic compounds (VOCs) including diacetyl and 2,3-pentanedione. Exposures to VOCs during roasting, packaging, grinding, and flavoring coffee can negatively impact the respiratory health of workers. Inhalational exposures to diacetyl and 2,3-pentanedione can cause obliterative bronchiolitis. This study summarizes exposures to and emissions of VOCs in 17 coffee roasting and packaging facilities that included 10 cafés. We collected 415 personal and 760 area full-shift, and 606 personal task-based air samples for diacetyl, 2,3-pentanedione, 2,3-hexanedione, and acetoin using silica gel tubes. We also collected 296 instantaneous activity and 312 instantaneous source air measurements for 18 VOCs using evacuated canisters. The highest personal full-shift exposure in part per billion (ppb) to diacetyl [geometric mean (GM) 21 ppb; 95th percentile (P95) 79 ppb] and 2,3-pentanedione (GM 15 ppb; P95 52 ppb) were measured for production workers in flavored coffee production areas. These workers also had the highest percentage of measurements above the NIOSH Recommended Exposure Limit (REL) for diacetyl (95%) and 2,3-pentanedione (77%). Personal exposures to diacetyl (GM 0.9 ppb; P95 6.0 ppb) and 2,3-pentanedione (GM 0.7 ppb; P95 4.4 ppb) were the lowest for non-production workers of facilities that did not flavor coffee. Job groups with the highest personal full-shift exposures to diacetyl and 2,3-pentanedione were flavoring workers (GM 34 and 38 ppb), packaging workers (GM 27 and 19 ppb) and grinder operator (GM 26 and 22 ppb), respectively, in flavored coffee facilities, and packaging workers (GM 8.0 and 4.4 ppb) and production workers (GM 6.3 and 4.6 ppb) in non-flavored coffee facilities. Baristas in cafés had mean full-shift exposures below the RELs (GM 4.1 ppb diacetyl; GM 4.6 ppb 2,3-pentanedione). The tasks, activities, and sources associated with flavoring in flavored coffee facilities and grinding in non-flavored coffee facilities, had some of the highest GM and P95 estimates for both diacetyl and 2,3-pentanedione. Controlling emissions at grinding machines and flavoring areas and isolating higher exposure areas (e.g., flavoring, grinding, and packaging areas) from the main production space and from administrative or non-production spaces is essential for maintaining exposure control.

Dataset Information

Effects of coffee roasting technologies on cup quality and bioactive compounds of specialty coffee beans.

Publications

Effects of coffee roasting technologies on cup quality and bioactive compounds of specialty coffee beans.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets