Dataset Information

Analytical validation of ONCURIA™ a multiplex bead-based immunoassay for the non-invasive bladder cancer detection.

ABSTRACT: Background: The objective of our study was to assess the analytical performance of a multiplex assay (Oncuria™) to quantify protein biomarkers towards a bladder cancer associated diagnostic signature in voided urine.

Method: ology: Using Luminex xMAP technology, a custom immunoassay was developed to measure the concentrations of 10 urinary analytes (angiogenin, ANG; apolipoprotein E, APOE; alpha-1 antitrypsin, A1AT; carbonic anhydrase 9, CA9; interleukin 8, IL8; matrix metallopeptidase 9, MMP9; matrix metallopeptidase 10, MMP10; plasminogen activator inhibitor 1, PAI1; syndecan 1, SDC1; vascular endothelial growth factor, VEGF). Selectivity, sensitivity, specificity, precision, linearity, dynamic range, and detection threshold were assessed using recombinant proteins and human urine samples. Analytical variability with respect to batch size, run, day, operator, and interference were also evaluated.

Results: Analytical evaluation demonstrated a) all antigen cross-reactivity was noted to be <1% of the tested concentration, b) minimal detected dose ranged from 0.295 ?pg/mL in IL8 to 31.1 ?pg/mL in APOE, c) highly reproducible and accurate noting coefficient of variation (CV) and relative error (RE) values below 15% for all analytes and d) minimal interference. The assay can be completed in <5 ?h using as little as 150 ??L of voided urine.

Conclusion: To our knowledge, this is the first multiplex bead-based immunoassay for the non-invasive detection of bladder cancer that has been analytically validated as a tool with the potential to help clinicians manage patients at risk of harboring bladder cancer.

SUBMITTER: Furuya H

PROVIDER: S-EPMC7691749 | biostudies-literature | 2020 Nov

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Analytical validation of ONCURIA™ a multiplex bead-based immunoassay for the non-invasive bladder cancer detection.

Furuya Hideki H Tabula Lindlelyn L Lee Riko R Kralovec Paul P Ramsden Martin M Wong Regan R Rosser Charles J CJ

Practical laboratory medicine 20201113

<h4>Background</h4>The objective of our study was to assess the analytical performance of a multiplex assay (Oncuria™) to quantify protein biomarkers towards a bladder cancer associated diagnostic signature in voided urine.<h4>Method</h4>ology: Using Luminex xMAP technology, a custom immunoassay was developed to measure the concentrations of 10 urinary analytes (angiogenin, ANG; apolipoprotein E, APOE; alpha-1 antitrypsin, A1AT; carbonic anhydrase 9, CA9; interleukin 8, IL8; matrix metallopeptid ...[more]

PMID: 33294574

Similar Datasets

Project description:BackgroundDue to insufficient accuracy, urine-based assays currently have a limited role in the management of patients with bladder cancer. The identification of multiplex molecular signatures associated with disease has the potential to address this deficiency and to assist with accurate, non-invasive diagnosis and monitoring.MethodsTo evaluate the performance of Oncuria™, a multiplex immunoassay for bladder detection in voided urine samples. The test was evaluated in a multi-institutional cohort of 362 prospectively collected subjects presenting for bladder cancer evaluation. The parallel measurement of 10 biomarkers (A1AT, APOE, ANG, CA9, IL8, MMP9, MMP10, PAI1, SDC1 and VEGFA) was performed in an independent clinical laboratory. The ability of the test to identify patients harboring bladder cancer was assessed. Bladder cancer status was confirmed by cystoscopy and tissue biopsy. The association of biomarkers and demographic factors was evaluated using linear discriminant analysis (LDA) and predictive models were derived using supervised learning and cross-validation analyses. Diagnostic performance was assessed using ROC curves.ResultsThe combination of the 10 biomarkers provided an AUROC 0.93 [95% CI 0.87-0.98], outperforming any single biomarker. The addition of demographic data (age, sex, and race) into a hybrid signature improved the diagnostic performance AUROC 0.95 [95% CI 0.90-1.00]. The hybrid signature achieved an overall sensitivity of 0.93, specificity of 0.93, PPV of 0.65 and NPV of 0.99 for bladder cancer classification. Sensitivity values of the diagnostic panel for high-grade bladder cancer, low-grade bladder cancer, MIBC and NMIBC were 0.94, 0.89, 0.97 and 0.93, respectively.ConclusionsUrinary levels of a biomarker panel enabled the accurate discrimination of bladder cancer patients and controls. The multiplex Oncuria™ test can achieve the efficient and accurate detection and monitoring of bladder cancer in a non-invasive patient setting.

Project description:BackgroundPlasmodium spp. sporozoite rates in mosquitoes are used to better understand malaria transmission intensity, the relative importance of vector species and the impact of interventions. These rates are typically estimated using an enzyme-linked immunosorbent assay (ELISA) utilizing antibodies against the circumsporozoite protein of Plasmodium falciparum, Plasmodium vivax VK210 (P. vivax210) or P. vivax VK247 (P. vivax247), employing assays that were developed over three decades ago. The ELISA method requires a separate assay plate for each analyte tested and can be time consuming as well as requiring sample volumes not always available. The bead-based multiplex platform allows simultaneous measurement of multiple analytes and may improve the lower limit of detection for sporozoites.MethodsRecombinant positive controls for P. falciparum, P. vivax210 and P. vivax247 and previously developed circumsporozoite (cs) ELISA antibodies were used to optimize conditions for the circumsporozoite multiplex bead assay (csMBA) and to determine the detection range of the csMBA. After optimizing assay conditions, known amounts of sporozoites were used to determine the lower limit of detection for the csELISA and csMBA and alternate cut-off measures were applied to demonstrate how cut-off criteria can impact lower limits of detection. Sporozoite rates from 1275 mosquitoes collected in Madagascar and 255 mosquitoes collected in Guinea were estimated and compared using the established csELISA and newly optimized csMBA. All mosquitoes were tested (initial test), and those that were positive were retested (retest). When sufficient sample volume remained, an aliquot of homogenate was boiled and retested (boiled retest), to denature any heat-unstable cross-reactive proteins.ResultsFollowing optimization of the csMBA, the lower limit of detection was 25 sporozoites per mosquito equivalent for P. falciparum, P. vivax210 and P. vivax247 whereas the lower limits of detection for csELISA were found to be 1400 sporozoites for P. falciparum, 425 for P. vivax210 and 1650 for P. vivax247. Combined sporozoite rates after re-testing of samples that initially tested positive for Madagascar mosquitoes by csELISA and csMBA were 1.4 and 10.3%, respectively, and for Guinea mosquitoes 2% by both assays. Boiling of samples followed by csMBA resulted in a decrease in the Madagascar sporozoite rate to 2.8-4.4% while the Guinea csMBA sporozoite rate remained at 2.0%. Using an alternative csMBA cut-off value of median fluorescence intensity (MFI) of 100 yielded a sporozoite rate after confirmational testing of 3.7% for Madagascar samples and 2.0% for Guinea samples. Whether using csMBA or csELISA, the following steps may help minimize false positives: specimens are appropriately stored and bisected anterior to the thorax-abdomen junction, aliquots of homogenate are boiled and retested following initial testing, and an appropriate cut-off value is determined.ConclusionsThe csMBA is a cost-comparable and time saving alternative to the csELISA and may help eliminate false negatives due to a lower limit of detection, thus increasing sensitivity over the csELISA. The csMBA expands the potential analyses that can be done with a small volume of sample by allowing multiplex testing where analytes in addition to P. falciparum, P. vivax210 and P. vivax247 can be added following optimization.

Project description:BackgroundNo single marker of bladder cancer (BC) exists in urine samples with sufficient accuracy for disease diagnosis and treatment monitoring. The multiplex Oncuria BC assay noninvasively quantifies the concentration of 10 protein analytes in voided urine samples to quickly generate a unique molecular profile with proven BC diagnostic and treatment-tracking utility. Test adoption by diagnostic and research laboratories mandates reliably reproducible assay performance across a variety of instrumentation platforms used in different laboratories.MethodsWe compared the performance of the clinically validated Oncuria BC multiplex immunoassay when data output was generated on three different analyzer systems. Voided urine samples from 36 subjects (18 with BC and 18 Controls) were reacted with Oncuria test reagents in three 96-well microtiter plates on Day 1, and consecutively evaluated on the LED/image-based MagPix, and laser/flow-based Luminex 200 and FlexMap 3D (all xMAP instruments from Luminex Corp., Austin, TX) on Day 2. The BC assay uses magnetic bead-based fluorescence technology (xMAP, Multi-analyte profiling; Luminex) to simultaneously quantify 10 protein analytes in urine specimens [i.e., angiogenin (ANG), apolipoprotein E (ApoE), carbonic anhydrase IX (CA9), CXCL8/interleukin-8 (IL-8), matrix metalloproteinase-9 (MMP-9), matrix metalloproteinase-10 (MMP-10), serpin A1/alpha-1 anti-trypsin (A1AT), serpin E1/plasminogen activator inhibitor-1 (PAI-1), CD138/syndecan-1 (SDC1), and vascular endothelial growth factor-A (VEGF-A)]. All three analyzers quantify fluorescence signals generated by the Oncuria assay.ResultsAll three platforms categorized all 10 analytes in identical samples at nearly identical concentrations, with variance across systems typically < 5%. While the most contemporary instrument, the FlexMap 3D, output higher raw fluorescence values than the two comparator systems, standard curve slopes and analyte concentrations determined in urine samples were concordant across all three units. Forty-four percent of BC samples registered ≥ 1 analyte above the highest standard concentration, i.e., A1AT (n = 7/18), IL-8 (n = 5), and/or ANG (n = 2), while only one control sample registered an analyte (A1AT) above the highest standard concentration.ConclusionMultiplex BC assays generate detailed molecular signatures useful for identifying BC, predicting treatment responsiveness, and tracking disease progression and recurrence. The similar performance of the Oncuria assay across three different analyzer systems supports test adaptation by clinical and research laboratories using existing xMAP platforms.Trial registrationThis study was registered at ClinicalTrials.gov as NCT04564781, NCT03193528, NCT03193541, and NCT03193515.

Project description:BackgroundNo single marker of bladder cancer (BC) exists in urine samples with sufficient accuracy for disease diagnosis and treatment monitoring. The multiplex Oncuria BC assay noninvasively quantifies the concentration of 10 protein analytes in voided urine samples to quickly generate a unique molecular profile with proven BC diagnostic and treatment-tracking utility. Test adoption by diagnostic and research laboratories mandates reliably reproducible assay performance across a variety of instrumentation platforms used in different laboratories.MethodsWe compared the performance of the clinically validated Oncuria BC multiplex immunoassay when data output was generated on three different analyzer systems. Voided urine samples from 36 subjects (18 with BC and 18 Controls) were reacted with Oncuria test reagents in three 96-well microtiter plates on Day 1, and consecutively evaluated on the LED/image-based MagPix, and laser/flow based Luminex 200 and FlexMap 3D (all xMAP instruments from Luminex Corp., Austin, TX) on Day 2. The BC assay uses magnetic bead-based fluorescence technology (xMAP, Multi-analyte profiling; Luminex) to simultaneously quantify 10 protein analytes in urine specimens [i.e., angiogenin (ANG), apolipoprotein E (ApoE), carbonic anhydrase IX (CA9), CXCL8/interleukin-8 (IL-8), matrix metalloproteinase-9 (MMP-9), matrix metalloproteinase-10 (MMP-10), serpin A1/alpha-1 anti-trypsin (A1AT), serpin E1/plasminogen activator inhibitor-1 (PAI-1), CD138/syndecan-1 (SDC1), and vascular endothelial growth factor-A (VEGF-A)].ResultsAll three platforms categorized all 10 analytes in identical samples at nearly identical concentrations, with variance across systems typically <5%. While the most contemporary instrument, the FlexMap 3D, output higher raw fluorescence values than the two comparator systems, standard curve slopes and analyte concentrations determined in urine samples were concordant across all three units. Forty-four percent of BC samples registered ≥1 analyte above the highest standard concentration, i.e., A1AT (n=7/18), IL-8 (n=5), and/or ANG (n=2). In Controls, A1AT was higher in one sample.ConclusionMultiplex BC assays generate detailed molecular signatures useful for identifying BC, predicting treatment esponsiveness, and tracking disease progression and recurrence. The similar performance of the Oncuria assay across three different analyzer systems supports test adaptation by clinical and research laboratories using existing xMAP platforms.Trial registrationThis study was registered at ClinicalTrials.gov as NCT04564781, NCT03193528, NCT03193541, and NCT03193515.

Dataset Information

Analytical validation of ONCURIA™ a multiplex bead-based immunoassay for the non-invasive bladder cancer detection.

Publications

Analytical validation of ONCURIA™ a multiplex bead-based immunoassay for the non-invasive bladder cancer detection.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets