Dataset Information

Three-Dimensionally Printed Patient-Specific Surgical Plates Increase Accuracy of Oncologic Head and Neck Reconstruction Versus Conventional Surgical Plates: A Comparative Study.

ABSTRACT:

Background

Surgeons are pursuing accurate head and neck reconstruction to enhance aesthetic and functional outcomes after oncologic resection. This study aimed to investigate whether accuracy of head and neck reconstruction is improved with the use of three-dimensionally (3D)-printed patient-specific surgical plates compared with conventional plates.

Methods

In this comparative study, patients were prospectively recruited into the study group (3DJP16) with 3D-printed patient-specific surgical plates. The patients in control group with conventional surgical plates were from a historic cohort in the same unit. The primary end point of the study was the accuracy of head and neck reconstruction. The secondary end points were accuracy of osteotomy, intraoperative blood loss, total operative time, and length of hospital stay.

Results

The study recruited of 33 patients, including 17 in the study group and 16 in the control group. The patients' baseline characteristics were similar between the two groups. The absolute distance deviation of the maxilla or mandible was 1.5?±?0.5 mm in the study group and 2.1?±?0.7 mm in the control group [mean difference, - 0.7 mm; 95% confidence interval (CI) - 1.1 to - 0.3; p?=?0.003], showing superior accuracy of reconstruction for the patients with 3D-printed patient-specific surgical plates. Improved accuracy of reconstruction also was detected in terms of bilateral mandibular angles and bone grafts. Concerning the secondary end points, the accuracy of the osteotomy was similar in the two groups. No difference was found regarding intraoperative blood loss, total operative time, or length of hospital stay.

Conclusions

This is the first study to prove that compared with conventional plates, 3D-printed patient-specific surgical plates improve the accuracy of oncologic head and neck reconstruction.

SUBMITTER: Yang WF

PROVIDER: S-EPMC7752789 | biostudies-literature | 2021 Jan

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Three-Dimensionally Printed Patient-Specific Surgical Plates Increase Accuracy of Oncologic Head and Neck Reconstruction Versus Conventional Surgical Plates: A Comparative Study.

Yang Wei-Fa WF Choi Wing Shan WS Wong May Chun-Mei MC Powcharoen Warit W Zhu Wang-Yong WY Tsoi James Kit-Hon JK Chow Marco M Kwok Ka-Wai KW Su Yu-Xiong YX

Annals of surgical oncology 20200622 1

<h4>Background</h4>Surgeons are pursuing accurate head and neck reconstruction to enhance aesthetic and functional outcomes after oncologic resection. This study aimed to investigate whether accuracy of head and neck reconstruction is improved with the use of three-dimensionally (3D)-printed patient-specific surgical plates compared with conventional plates.<h4>Methods</h4>In this comparative study, patients were prospectively recruited into the study group (3DJP16) with 3D-printed patient-speci ...[more]

PMID: 32572853

Similar Datasets

Project description:ImportanceLocalization of small lung nodules are challenging because of the difficulty of nodule recognition during video-assisted thoracoscopic surgery. Using 3-dimensional (3-D) printing technology, a navigational template was recently created to assist percutaneous lung nodule localization; however, the efficacy and safety of this template have not yet been evaluated.ObjectiveTo assess the noninferiority of the efficacy and safety of a 3-D-printed navigational template guide for localizing small peripheral lung nodules.Design, setting, and participantsThis noninferiority randomized clinical trial conducted between October 2016 and October 2017 at Shanghai Pulmonary Hospital, Shanghai, China, compared the safety and precision of lung nodule localization using a template-guided approach vs the conventional computed tomography (CT)-guided approach. In total, 213 surgical candidates with small peripheral lung nodules (<2 cm) were recruited to undergo either CT- or template-guided lung nodule localization. An intention-to-treat analysis was conducted.InterventionsPercutaneous lung nodule localization.Main outcomes and measuresThe primary outcome was the accuracy of lung nodule localization (localizer deviation), and secondary outcomes were procedural duration, radiation dosage, and complication rate.ResultsOf the 200 patients randomized at a ratio of 1:1 to the template- and CT-guided groups, most were women (147 vs 53), body mass index ranged from 15.4 to 37.3, the mean (SD) nodule size was 9.7 (2.9) mm, and the mean distance between the outer edge of target nodule and the pleura was 7.8 (range, 0.0-43.9) mm. In total, 190 patients underwent either CT- or template-guided lung nodule localization and subsequent surgery. Among these patients, localizer deviation did not significantly differ between the template- and CT-guided groups (mean [SD], 8.7 [6.9] vs 9.6 [5.8] mm; P = .36). The mean (SD) procedural durations were 7.4 (3.2) minutes for the template-guided group and 9.5 (3.6) minutes for the CT-guided group (P < .001). The mean (SD) radiation dose was 229 (65) mGy × cm in the template-guided group and 313 (84) mGy × cm in CT-guided group (P < .001).Conclusions and relevanceThe use of the 3-D-printed navigational template for localization of small peripheral lung nodules showed efficacy and safety that were not substantially worse than those for the CT-guided approach while significantly simplifying the localization procedure and decreasing patient radiation exposure.Trial registrationClinicalTrials.gov identifier: NCT02952261.

Project description:BackgroundComputer-assisted jaw reconstruction (CAJR) has benefits in reducing operation time and improving reconstruction accuracy, compared to conventional freehand jaw reconstruction. However, no information is available regarding learning curves in CAJR with the use of 3D-printed patient-specific surgical plates (PSSP). The purpose of this study was to assess surgical outcomes and learning curve for the first 58 consecutive CAJR using 3D-printed PSSP performed by a single surgical team in a single institution.MethodsIn a prospective study, consecutive patients who underwent free flap CAJR using 3D-printed PSSP were included. The determination of proficiency, based on the cumulative sum of surgical success (no major adjustment of 3D-printed PSSP, flap survival) passing the acceptable boundary line of cumulative sum analysis, was the primary outcome. To find out any potential factors influencing the learning curve, baseline characteristics of patients were compared before and after proficiency achievement. Secondary outcomes included inflexion points of the total operation time, blood loss, length of hospital stay, and bone graft deviation, measured by the cumulative sum analysis.ResultsFrom December 2016 to November 2020, 58 consecutive cases underwent surgery performed by a single surgical team. The overall surgical success rate was 94.8% (55/58). A three-stage learning curve of primary outcome was observed. The proficiency was achieved after 23 cases. The proportions of advanced tumor staging and concomitant surgery after obtaining proficiency were significantly higher than those before achieving proficiency (p = 0.046 and p < 0.001, respectively). Mean values of operation time, intraoperative blood loss, length of hospital stay, and bone graft deviation were 532.5 ± 119.2 min, 1,006.8 ± 547.2 ml, 16.1 ± 6.3 days, and 0.9 ± 1.2 mm, respectively. Two trends of learning curve were observed in the CUSUM analyses of total operation time, length of hospital stay, and bone graft deviation, in which the first and second inflexion points occurred between 8 and 17 cases and between 43 and 46 cases, respectively.ConclusionOur results revealed a three-stage learning curve of CAJR with the use of PSSP, including initial learning, plateau, and overlearning. Based on CUSUM analysis, the surgical proficiency was achieved after 23 cases, and total operation time, length of hospital stay, and bone graft deviation stabilized after 8-17 cases.

Project description:BACKGROUND:Autologous bone grafts remain a standard of care for the reconstruction of large bony defects, but limitations persist. The authors explored the bone regenerative capacity of customized, three-dimensionally printed bioactive ceramic scaffolds with dipyridamole, an adenosine A2A receptor indirect agonist known to enhance bone formation. METHODS:Critical-size bony defects (10-mm height, 10-mm length, full-thickness) were created at the mandibular rami of rabbits (n = 15). Defects were replaced by a custom-to-defect, three-dimensionally printed bioactive ceramic scaffold composed of ?-tricalcium phosphate. Scaffolds were uncoated (control), collagen-coated, or immersed in 100 ?M dipyridamole. At 8 weeks, animals were euthanized and the rami retrieved. Bone growth was assessed exclusively within scaffold pores, and evaluated by micro-computed tomography/advanced reconstruction software. Micro-computed tomographic quantification was calculated. Nondecalcified histology was performed. A general linear mixed model was performed to compare group means and 95 percent confidence intervals. RESULTS:Qualitative analysis did not show an inflammatory response. The control and collagen groups (12.3 ± 8.3 percent and 6.9 ± 8.3 percent bone occupancy of free space, respectively) had less bone growth, whereas the most bone growth was in the dipyridamole group (26.9 ± 10.7 percent); the difference was statistically significant (dipyridamole versus control, p < 0.03; dipyridamole versus collagen, p < 0.01 ). There was significantly more residual scaffold material for the collagen group relative to the dipyridamole group (p < 0.015), whereas the control group presented intermediate values (nonsignificant relative to both collagen and dipyridamole). Highly cellular and vascularized intramembranous-like bone healing was observed in all groups. CONCLUSION:Dipyridamole significantly increased the three-dimensionally printed bioactive ceramic scaffold's ability to regenerate bone in a thin bone defect environment.

Dataset Information

Three-Dimensionally Printed Patient-Specific Surgical Plates Increase Accuracy of Oncologic Head and Neck Reconstruction Versus Conventional Surgical Plates: A Comparative Study.

Background

Methods

Results

Conclusions

Publications

Three-Dimensionally Printed Patient-Specific Surgical Plates Increase Accuracy of Oncologic Head and Neck Reconstruction Versus Conventional Surgical Plates: A Comparative Study.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure