Browse
Submit Data
Databases
API
Help

Dataset Information

30 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

High-Voltage Flexible Aqueous Zn-Ion Battery with Extremely Low Dropout Voltage and Super-Flat Platform.

ABSTRACT: Flexible rechargeable aqueous zinc-ion batteries (ZIBs) have attracted extensive attentions in the energy storage field due to their high safety, environmental friendliness, and outstanding electrochemical performance while the exploration of high-voltage aqueous ZIBs with excellent rate capability is still a great challenge for the further application them in flexible and wearable electronics. Herein, we fabricated a 2.4 V high-voltage flexible aqueous ZIB, being among the highest voltage reported in aqueous ZIBs. Moreover, it exhibits extremely flat charging/discharging voltage platforms and the dropout voltage is only 0.1 V, which is the smallest gap in all aqueous batteries to our best knowledge. Furthermore, the prepared ZIB performs high rate capability of 25 C and energy density of 120 Wh kg^-1 and exhibits excellent safety under various destructive conditions including hammering, sewing, punching, and soaking. These extraordinary results indicate the great application potential of our high-voltage flexible aqueous ZIB in wearable electronics.

SUBMITTER: Chen Z

PROVIDER: S-EPMC7770716 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

High-Capacity and Long-Lifespan Aqueous LiV3O8/Zn Battery Using Zn/Li Hybrid Electrolyte.

Project description:Aqueous zinc-ion batteries (AZIBs) are promising candidates for large-scale energy storage because of their low cost and high safety. However, their practical applications are impeded by low energy density and short service life. Here, an aqueous Zn2+/Li+ hybrid-ion battery is fabricated using the LiV3O8 nanorods as the cathode, metallic Zn as the anode, and 3 M Zn(OTf)2 + 0.5 M LiOTf aqueous solution as the electrolyte. Compared with the batteries using pure 3 M Zn(OTf)2 electrolyte, the cycle performance of the hybrid-ion battery is significantly improved. After 4000 cycles at 5 A g1, the remaining capacity is 163.9 mA h g-1 with impressive capacity retention of 87.0%. Ex-situ XRD, ex-situ XPS, and SEM tests demonstrate that the hybrid electrolyte can inhibit the formation of the irreversible Zn3(OH)2V2O7·2H2O by-product and restrict Zn dendrite growth during cycling, thereby improving the cycle performance of the batteries.

| S-EPMC8229935 | biostudies-literature

Jahn-Teller Distortion Induced Mn2+-Rich Cathode Enables Optimal Flexible Aqueous High-Voltage Zn-Mn Batteries.

Project description:Although one of the most promising aqueous batteries, all Zn-Mn systems suffer from Zn dendrites and the low-capacity Mn4+/Mn3+ process (readily leading to the occurrence of Jahn-Teller distortion, which in turn causes structural collapse and voltage/capacity fading). Here, the Mn3+ reconstruction and disproportionation are exploited to prepare the stable, Mn2+-rich manganese oxides on carbon-cloth (CMOs) in a discharged state through an inverted design, which promotes reversible Mn2+/Mn4+ kinetics and mitigates oxygen-related redox activity. Such a 1.65 V Mn2+-rich cathode enable constructing a 2.2 V Zn-Mn battery, providing a high area capacity of 4.16 mA h cm-2 (25 mA h cm-2 for 10 mL electrolyte) and superior 4000-cycle stability. Moreover, a flexible hybrid 2.7 V Zn-Mn battery is constructed using 2-pH hydrogel electrolytes to demonstrate excellent practicality and stability. A further insight has been gained to the commercial application of aqueous energy storage devices toward low-cost, high safety, and excellent energy density.

| S-EPMC8224442 | biostudies-literature

A Low Cost Aqueous Zn-S Battery Realizing Ultrahigh Energy Density.

Project description:Rechargeable aqueous zinc ion batteries are enabled by the (de)intercalation chemistry, but bottlenecked by the limited energy density due to the low capacity of cathodes. In this work, carbon nanotubes supported 50 wt% sulfur (denoted as S@CNTs-50), as a conversional cathode, is employed and a high energy density aqueous zinc-sulfur (Zn-S) battery is constructed . In the electrolyte of 1 m Zn(CH3COO)2 (pH = 6.5) with 0.05 wt% I2 additive where I2 can serve as medium of Zn2+ ions to reduce the voltage hysteresis of S@CNTs-50 and stabilize Zn stripping/plating, S@CNTs-50 delivers a high capacity of 1105 mAh g-1 with a flat discharge voltage of 0.5 V, realizing an energy density of 502 Wh kg-1 based on sulfur, which is one of the highest values reported in aqueous Zn-based batteries that use mild electrolyte. Moreover, the chemical materials cost of this aqueous Zn-S battery can be lowered to be $45 kWh-1 due to the cheap raw materials, reaching to the level of pumped energy storage. Ex situ X-ray diffraction, Raman spectra, X-ray photoelectron spectrum, and transmission electron microscopy measurements reveal that sulfur cathode undergoes a conversion reaction between S and ZnS.

| S-EPMC7709974 | biostudies-literature

Manipulating anion intercalation enables a high-voltage aqueous dual ion battery.

Project description:Aqueous graphite-based dual ion batteries have unique superiorities in stationary energy storage systems due to their non-transition metal configuration and safety properties. However, there is an absence of thorough study of the interactions between anions and water molecules and between anions and electrode materials, which is essential to achieve high output voltage. Here we reveal the four-stage intercalation process and energy conversion in a graphite cathode of anions with different configurations. The difference between the intercalation energy and hydration energy of bis(trifluoromethane)sulfonimide makes the best use of the electrochemical stability window of its electrolyte and delivers a high intercalation potential, while BF4- and CF3SO3- do not exhibit a satisfactory potential because the graphite intercalation potential of BF4- is inferior and the graphite intercalation potential of CF3SO3- exceeds the voltage window of its electrolyte. An aqueous dual ion battery based on the intercalation behaviors of bis(trifluoromethane)sulfonimide anions into a graphite cathode exhibits a high voltage of 2.2 V together with a specific energy of 242.74 Wh kg-1. This work provides clear guidance for the voltage plateau manipulation of anion intercalation into two-dimensional materials.

| S-EPMC8149852 | biostudies-literature

Inkjet-printed flexible planar Zn-MnO2 battery on paper substrate.

Project description:Energy storage devices (ESD) which are intended to power electronic devices, used in close contact of human skin, are desirable to be safe and non-toxic. In light of this requirement, Zn based energy storage devices seem to provide a viable pathway as they mostly employ aqueous based electrolytes which are safe and non-toxic in their functioning. Additionally, having a flexible ESD will play a crucial role as it will enable the ESD to conform to the varying shapes and sizes of wearable electronics which they energize. In this work, we have developed an inkjet-printed Zinc ion battery (IPZIB) with planar electrode configuration over bond paper substrate. Zn has been used as the negative electrode, MnO2 is used as the positive electrode with Poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS) as the active binder. Conducting tracks of reduced graphene oxide (rGO) are used to construct the current collector on the paper substrate. The fabricated IPZIB delivered a high discharge capacity of 300.14 mAh g-1 at a current density of 200 mA g-1. The energy density of the IPZIB is observed as 330.15 Wh kg-1 at a power density of 220 W kg-1 and retains an energy density of 94.36 Wh kg-1 at a high power density of 1650 W kg-1. Finally, we have demonstrated the capability of the IPZIB to power a LED at various bending and folding conditions which indicates its potential to be used in the next generation flexible and wearable electronic devices.

| S-EPMC10796916 | biostudies-literature

Flexible, Porous, and Metal-Heteroatom-Doped Carbon Nanofibers as Efficient ORR Electrocatalysts for Zn-Air Battery.

Project description:Developing an efficient and durable oxygen reduction electrocatalyst is critical for clean-energy technology, such as fuel cells and metal-air batteries. In this study, we developed a facile strategy for the preparation of flexible, porous, and well-dispersed metal-heteroatom-doped carbon nanofibers by direct carbonization of electrospun Zn/Co-ZIFs/PAN nanofibers (Zn/Co-ZIFs/PAN). The obtained Zn/Co and N co-doped porous carbon nanofibers carbonized at 800 °C (Zn/Co-N@PCNFs-800) presented a good flexibility, a continuous porous structure, and a superior oxygen reduction reaction (ORR) catalytic activity to that of commercial 20 wt% Pt/C, in terms of its onset potential (0.98 V vs. RHE), half-wave potential (0.89 V vs. RHE), and limiting current density (- 5.26 mA cm-2). In addition, we tested the suitability and durability of Zn/Co-N@PCNFs-800 as the oxygen cathode for a rechargeable Zn-air battery. The prepared Zn-air batteries exhibited a higher power density (83.5 mW cm-2), a higher specific capacity (640.3 mAh g-1), an excellent reversibility, and a better cycling life than the commercial 20 wt% Pt/C + RuO2 catalysts. This design strategy of flexible porous non-precious metal-doped ORR electrocatalysts obtained from electrospun ZIFs/polymer nanofibers could be extended to fabricate other novel, stable, and easy-to-use multi-functional electrocatalysts for clean-energy technology.

| S-EPMC7770869 | biostudies-literature

Environmentally-friendly aqueous Li (or Na)-ion battery with fast electrode kinetics and super-long life.

Project description:Current rechargeable batteries generally display limited cycle life and slow electrode kinetics and contain environmentally unfriendly components. Furthermore, their operation depends on the redox reactions of metal elements. We present an original battery system that depends on the redox of I(-)/I3 (-) couple in liquid cathode and the reversible enolization in polyimide anode, accompanied by Li(+) (or Na(+)) diffusion between cathode and anode through a Li(+)/Na(+) exchange polymer membrane. There are no metal element-based redox reactions in this battery, and Li(+) (or Na(+)) is only used for charge transfer. Moreover, the components (electrolyte/electrode) of this system are environment-friendly. Both electrodes are demonstrated to have very fast kinetics, which gives the battery a supercapacitor-like high power. It can even be cycled 50,000 times when operated within the electrochemical window of 0 to 1.6 V. Such a system might shed light on the design of high-safety and low-cost batteries for grid-scale energy storage.

| S-EPMC4737207 | biostudies-literature

Bi2S3 for Aqueous Zn Ion Battery with Enhanced Cycle Stability.

Project description:Aqueous Zn ion batteries (ZIBs) are promising in energy storage due to the low cost, high safety, and material abundance. The development of metal oxides as the cathode for ZIBs is limited by the strong electrostatic forces between O2- and Zn2+ which leads to poor cyclic stability. Herein, Bi2S3 is proposed as a promising cathode material for rechargeable aqueous ZIBs. Improved cyclic stability and fast diffusion of Zn2+ is observed. Also, the layered structure of Bi2S3 with the weak van der Waals interaction between layers offers paths for diffusion and occupancy of Zn2+. As a result, the Zn/Bi2S3 battery delivers high capacity of 161 mAh g-1 at 0.2 A g-1 and good cycling stability up to 100 cycles with ca. 100% retention. The battery also demonstrates good cyclic performance of ca. 80.3% over 2000 cycles at 1 A g-1. The storage mechanism in the Bi2S3 cathode is related to the reversible Zn ion intercalation/extraction reactions and the capacitive contribution. This work indicates that Bi2S3 shows great potential as the cathode of ZIBs with good performance and stability.

| S-EPMC7770836 | biostudies-literature

High-voltage and long-lasting aqueous chlorine-ion battery by virtue of "water-in-salt" electrolyte.

Project description:Chloride-ion battery (CIB) is regarded as a promising electrochemical storage device due to their high theoretical volumetric capacities, low cost, and high abundance. However, low-cycle life limits its application in the energy storage field. Herein, we report a rechargeable CIB composed of a "water-in-salt" electrolyte, a zinc anode, and a carbon cathode (graphene, carbon nanotubes, carbon black). These cathodes exhibit initial reversible specific capacities of 136, 108, and 102 mAh g-1, respectively. Especially, a reversible discharge capacity of 95 mAh g-1 was retained after 2000 cycles when graphene is used as the cathode. Such high cycling stability was first reported in CIBs. Furthermore, the use of "water-in-salt" electrolytes has improved the discharge platform of aqueous CIBs to 2.6V. The charge and discharge mechanism of the carbon cathode was investigated by TEM, FTIR, Raman, and XPS, proving the chloride ions reversible absorption/desorption in carbon cathodes.

| S-EPMC7797922 | biostudies-literature

Extremely flat band in bilayer graphene.

Project description:We propose a novel mechanism of flat band formation based on the relative biasing of only one sublattice against other sublattices in a honeycomb lattice bilayer. The mechanism allows modification of the band dispersion from parabolic to "Mexican hat"-like through the formation of a flattened band. The mechanism is well applicable for bilayer graphene-both doped and undoped. By angle-resolved photoemission from bilayer graphene on SiC, we demonstrate the possibility of realizing this extremely flattened band (< 2-meV dispersion), which extends two-dimensionally in a k-space area around the K¯ point and results in a disk-like constant energy cut. We argue that our two-dimensional flat band model and the experimental results have the potential to contribute to achieving superconductivity of graphene- or graphite-based systems at elevated temperatures.

| S-EPMC6226281 | biostudies-other

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data