Browse
Submit Data
Databases
API
Help

Dataset Information

20 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Engineering Leaf-Like UiO-66-SO₃H Membranes for Selective Transport of Cations.

ABSTRACT: Metal-organic frameworks (MOFs) with angstrom-sized pores are promising functional nanomaterials for the fabrication of cation permselective membranes (MOF-CPMs). However, only a few research reports show successful preparation of the MOF-CPMs with good cation separation performance due to several inherent problems in MOFs, such as arduous self-assembly, poor water resistance, and tedious fabrication strategies. Besides, low cation permeation flux due to the absence of the cation permeation assisting functionalities in MOFs is another big issue, which limits their widespread use in membrane technology. Therefore, it is necessary to fabricate functional MOF-CPMs using simplistic strategies to improve cation permeation. In this context, we report a facile in situ smart growth strategy to successfully produce ultrathin (< 600 nm) and leaf-like UiO-66-SO₃H membranes at the surface of anodic alumina oxide. The physicochemical characterizations confirm that sulfonated angstrom-sized ion transport channels exist in the as-prepared UiO-66-SO₃H membranes, which accelerate the cation permeation (~ 3× faster than non-functionalized UiO-66 membrane) and achieve a high ion selectivity (Na⁺/Mg²⁺ > 140). The outstanding cation separation performance validates the importance of introducing sulfonic acid groups in MOF-CPMs.

SUBMITTER: Xu T

PROVIDER: S-EPMC7770750 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Mixed-Matrix Membranes Formed from Imide-Functionalized UiO-66-NH2 for Improved Interfacial Compatibility.

Project description:Mixed-matrix membranes (MMMs) formed by dispersing metal-organic framework (MOF) particles in polymers have attracted significant attention because these composite systems can potentially surpass the separation performance of pure polymers alone. However, performance improvements are often unrealized because of poor interfacial compatibility between the MOF and the polymer, which results in interfacial defects. From a practical perspective, strategies are needed to address these defects so that MMMs can be deployed in real-world separation processes. From a fundamental perspective, strategies are needed to reliably form defect-free MMMs so that transport models can be applied to estimate pure MOF property sets, thereby enabling the development of robust structure-property relationships. To address these interfacial challenges, we have developed a method to surface-functionalize a UiO-66-NH2 MOF with a nanoscopic shell of covalently tethered 4,4'-(hexafluoroisopropylidene)diphthalic anhydride-Durene oligomers. When combined with a high-molecular-weight polymer of identical chemical structure to that of the imide-functional MOF surface, defect-free MMMs with uniform particle dispersions can be formed. With this technique, both permeabilities and selectivities of select gases in the MMMs were improved at loadings ranging from 5 to 40 wt %. At a 40 wt % loading, CO2 permeability and CO2/CH4 selectivity were enhanced by 48 and 15%, respectively. Additionally, pure MOF permeabilities for H2, N2, O2, CH4, and CO2 were predicted by the Maxwell model.

| S-EPMC6727620 | biostudies-literature

Metal-organic framework (UiO-66 and UiO-66-NH2)-based adsorbents for bilirubin removal used in hemoperfusion.

Project description:Excessive accumulation of bilirubin in patients with hyperbilirubinemia can lead to tissue and organ damage and neurological diseases, and is even life-threatening in severe cases. Hemoperfusion is an effective method for removing bilirubin, but clinically used hemoperfusion adsorbents have unsatisfactory adsorption capacity and kinetics. In order to obtain a safe and efficient bilirubin adsorbent, Zr-based Metal-Organic Framework (MOF) material UiO-66 with high specific surface area and aqueous medium stability was prepared and modified with varying degrees of amination to improve its adsorption capacity. According to adsorption experiments in aqueous solution and simulated plasma, it was confirmed that the unsaturated coordinated zirconium in UiO-66 can effectively induce the aggregation and precipitation of free bilirubin unbound to albumin and the amino group on UiO-66-NH2 has a strong affinity for albumin bound bilirubin. The adsorption effect of UiO-66-NH2 with a high degree of amino modification is significantly stronger than that of UiO-66-NH2 with a low degree of modification. In simulated plasma with a bilirubin concentration of 40 mg dL-1, the adsorption capacities of UiO-66 and UiO-66-NH2-1.9 can reach 69.08 mg g-1 and 81.13 mg g-1. The adsorption isotherm fitting and adsorption kinetics fitting results also show that UiO-66 and UiO-66-NH2 are good adsorbents for bilirubin. In dynamic adsorption, the adsorbents also showed good performance and did not affect the protein in the plasma. The hemolysis test, coagulation time test, and cytotoxicity test confirmed that the bilirubin adsorbents based on UiO-66 and UiO-66-NH2 have good blood compatibility and biocompatibility. This study provides new ideas for the development of a novel bilirubin adsorbent and a theoretical basis for the study of bilirubin adsorption mechanisms.

| S-EPMC10691446 | biostudies-literature

Copper-zirconia interfaces in UiO-66 enable selective catalytic hydrogenation of CO2 to methanol.

Project description:Molecular interactions with both oxides and metals are essential for heterogenous catalysis, leading to remarkable synergistic impacts on activity and selectivity. Here, we show that the direct link between the two phases (and not merely being together) is required to selectively hydrogenate CO2 to methanol on catalysts containing Cu and ZrO2. Materials consisting of isolated Cu particles or atomically dispersed Cu-O-Zr sites only catalyze the reverse water-gas shift reaction. In contrast, a metal organic framework structure (UiO-66) with Cu nanoparticles occupying missing-linker defects maximizes the fraction of metallic Cu interfaced to ZrO2 nodes leading to a material with high adsorption capacity for CO2 and high activity and selectivity for low-temperature methanol synthesis.

| S-EPMC7674450 | biostudies-literature

The Carboxyl Functionalized UiO-66-(COOH)2 for Selective Adsorption of Sr2.

Project description:Efficient and selective removal of 90Sr is an important process for the safe use of nuclear energy. Herein, we investigate and assess the Sr2+ adsorption properties of a metal-organic framework UiO-66-(COOH)2 functionalized by non-bonded carboxylic groups. This MOF is an exciting class of free carboxylic functionalized MOFs that combine chemical stability with gas sorption, dye elimination, and conductivity. Specifically, we show that uniformly distributed carboxyl and water stability make it accessible for loading Sr2+ without structural changes. The FTIR spectroscopy, PXRD analysis, XPS, and SEM-EDS studies show excellent stability as well as the strong affinity between -COOH active site and Sr2+. This strong coordination interaction guarantees a high adsorption capacity of 114 mg g-1 within 5 h (pH 5 and 298 K). Combined kinetic and thermodynamic studies show that the surface complexation is strong chemisorption and cost-effective spontaneous process (ΔG = -5.49 kJ mol-1~-2.16 kJ mol-1). The fact that UiO-66-(COOH)2 not only possesses a high adsorption capacity, but also enables selectivity to Sr2+ in the presence of similar radius ions Na+ and K+, prefigures its great potential for the practical treatment of radioactive Sr2+ in polluted water.

| S-EPMC8879016 | biostudies-literature

High Gas Permeability in Aged Superglassy Membranes with Nanosized UiO-66-NH2 /cPIM-1 Network Fillers.

Project description:Superglassy membranes synthesised by polymers of intrinsic microporosity (PIMs) suffer from physical aging and show poor gas permeance over time, especially thin membranes, due to the fast rearrangement of nonequilibrium polymer chains. Herein, we constructed a novel PIM-1 thin film nanocomposite membrane (TFN) using nanosized UiO-66-NH2 (≈10 nm)/carboxylated PIM-1 (cPIM-1) as the composite filler. Unlike conventional fillers, which interact with the polymer only via the surface, the UiO-66-NH2 /cPIM-1 forms a stable three-dimensional (3D) network intertwining with the polymer chains, being very effective to impede chain relaxation, and thus physical aging. Nanosizing of UiO-66-NH2 was achieved by regulating the nucleation kinetics using carbon quantum dots (CQD) during the synthesis. This led to increased surface area, and hence more functional groups to bond with cPIM-1 (via hydrogen bonding between -NH2 and -COOH groups), which also improved interfacial compatibility between the 3D network and polymer chains avoiding defect formation. As a result, the novel TFN showed significantly improved performance in gas separation along with reduced aging (i.e. ≈6 % loss in CO2 permeability over 63 days); the aged membranes had a CO2 permeance of 2504 GPU and ideal selectivity values of 37.2 and 23.8 for CO2 /N2 and CO2 /CH4 , respectively.

| S-EPMC10952568 | biostudies-literature

A Novel Composite Material UiO-66@HNT/Pebax Mixed Matrix Membranes for Enhanced CO2/N2 Separation.

Project description:Mixing a polymer matrix and nanofiller to prepare a mixed matrix membrane (MMM) is an effective method for enhancing gas separation performance. In this work, a unique UiO-66-decorated halloysite nanotubes composite material (UiO-66@HNT) was successfully synthesized via a solvothermal method and dispersed into the Pebax-1657 matrix to prepare MMMs for CO2/N2 separation. A remarkable characteristic of this MMM was that the HNT lumen provided the highway for CO2 diffusion due to the unique affinity of UiO-66 for CO2. Simultaneously, the close connection of the UiO-66 layer on the external surface of HNTs created relatively continuous pathways for gas permeation. A suite of microscopy, diffraction, and thermal techniques was used to characterize the morphology and structure of UiO-66@HNT and the membranes. As expected, the embedding UiO-66@HNT composite materials significantly improved the separation performances of the membranes. Impressively, the as-obtained membrane acquired a high CO2 permeability of 119.08 Barrer and CO2/N2 selectivity of 76.26. Additionally, the presence of UiO-66@HNT conferred good long-term stability and excellent interfacial compatibility on the MMMs. The results demonstrated that the composite filler with fast transport pathways designed in this study was an effective strategy to enhance gas separation performance of MMMs, verifying its application potential in the gas purification industry.

| S-EPMC8467370 | biostudies-literature

Polyethyleneimine-Modified UiO-66-NH2(Zr) Metal-Organic Frameworks: Preparation and Enhanced CO2 Selective Adsorption.

Project description:UiO-66-NH2, a zirconium-based functional metal-organic framework (MOF), was postsynthetically modified via Schiff base reaction between aldehyde groups in glutaraldehyde and amino groups in UiO-66-NH2 and CO2-preabsorbed polyethyleneimine (PEI). The resulting PEI-modified MOFs, abbreviated as PEIC@UiO, were characterized with 1H NMR, Fourier transform infrared, powder X-ray diffraction, Brunauer-Emmett-Teller, scanning electron microscopy, and thermogravimetric analysis and evaluated as CO2 adsorbents. In comparison with pristine UiO-66-NH2, the PEIC@UiO adsorbents have reduced specific surface area (7-150 m2/g) but maintained the same crystal structure. Particularly, the PEIC96@UiO adsorbent exhibited significantly improved CO2/N2 adsorption selectivity (48 vs 25) and higher CO2 adsorption capacity (3.2 vs 2.7 mmol/g). The adsorbent also displayed moderate desorption energy (68 kJ/mol CO2), superior moisture endurance, and recyclability, which are very desirable for practical applications.

| S-EPMC6648867 | biostudies-literature

Missing Linkers: An Alternative Pathway to UiO-66 Electronic Structure Engineering.

Project description:UiO-66 is a promising metal-organic framework for photocatalytic applications. However, the ligand-to-metal charge transfer of an excited electron is inefficient in the pristine material. Herein, we assess the influence of missing linker defects on the electronic structure of UiO-66 and discuss their ability to improve ligand-to-metal charge transfer. Using a new defect classification system, which is transparent and easily extendable, we identify the most promising photocatalysts by considering both relative stability and electronic structure. We find that the properties of UiO-66 defect structures largely depend on the coordination of the constituent nodes and that the nodes with the strongest local distortions alter the electronic structure most. Defects hence provide an alternative pathway to tune UiO-66 for photocatalytic purposes, besides linker modification and node metal substitution. In addition, the decomposition of MOF properties into node- and linker-based behavior is more generally valid, so we propose orthogonal electronic structure tuning as a paradigm in MOF design.

| S-EPMC5390508 | biostudies-literature

Functionalized UiO-66-NH2 by trimellitic acid for highly selective adsorption of basic blue 3 from aqueous solutions.

Project description:A novel metal-organic framework (MOF) UiO-66-TLA (UiO-66-Trimellitic Acid) was synthesized by one-pot method with trimellitic acid as modifier, which can effectively remove the basic dye Basic Blue 3 (BB3) in wastewater. Modification with carboxyl groups facilitates the adsorption of the cationic dye Basic Blue 3. The adsorption of BB3 by the modified UiO-66-TLA was significantly greater than that of its parent MOF. The adsorption capacity of the modified UiO-66-TLA for BB3 (234.23 mg g-1) was 93.2% higher than that of the original UiO-66-NH2 (121.24 mg g-1), this is closely related to the electrostatic interaction of -COOH in trimellitic acid. UiO-66-TLA was successfully synthesized as indicated by various characterization results. The adsorption kinetics conformed to the pseudo-second-order model, and the adsorption isotherm conformed to the Redlich-Peterson isotherm. This indicates that BB3 is a multi-parameter model of monolayer/multilayer arrangement on the adsorbent surface, and its rate-controlling step is chemisorption. The adsorption process was non-spontaneous and belonged to an endothermic reaction, in addition, it has great adsorption stability and regeneration The interaction of the modified UiO-66-TLA with BB3 was mainly affected by mechanisms, such as electrostatic interaction, π-π stacking as well as the abundant functional groups on UiO-66-TLA surface. These results demonstrate that UiO-66-TLA is an efficient, regenerable, water-stable material for the removal of BB3 in solution, with practical implications, suggesting its potential as a dye adsorbent.

| S-EPMC9480502 | biostudies-literature

UiO‐66 and hcp UiO‐66 Catalysts Synthesized from Ionic Liquids as Linker Precursors

Project description:Abstract Using ionic liquids (ILs) as linker precursors, the well‐known metal‐organic framework (MOF) UiO‐66 (Universitetet i Oslo) and the recently reported MOF hcp UiO‐66 (hexagonal closed packed) have been successfully synthesized and characterized. The advantage of the applied novel synthesis approach is an economically and environmentally benign work‐up procedure, due to the better solubility of the IL. Additionally, the reactivity of the terephthalate anions is increased compared to terephthalic acid, resulting in faster MOF formation with an increased amount of defects in the MOF structure. In order to explore to the influence of defects on the catalytic performance, the cyclisation of citronellal to isopulegol was employed as test reaction. The activity of hcp UiO‐66 and fcc UiO‐66 (face centered cubic) is improved compared to other MOF or zeolite based catalysts, while the selectivity is similar. The use of ionic liquids as linker precursor for the synthesis of the metal‐organic frameworks hcp and fcc UiO‐66 results in faster crystallization thereby reducing synthesis time and energy consumed. Furthermore, the catalytic activity of the MOFs in the cyclization of citronellal to isopulegol is increased due to defects within the frameworks while the selectivity is not affected.

| S-EPMC7874251 | biostudies-literature