Browse
Submit Data
Databases
API
Help

Dataset Information

25 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Low-Temperature Growing Anatase TiO₂/SnO₂ Multi-dimensional Heterojunctions at MXene Conductive Network for High-Efficient Perovskite Solar Cells.

ABSTRACT: A multi-dimensional conductive heterojunction structure, composited by TiO₂, SnO₂, and Ti₃C₂T_X MXene, is facilely designed and applied as electron transport layer in efficient and stable planar perovskite solar cells. Based on an oxygen vacancy scramble effect, the zero-dimensional anatase TiO₂ quantum dots, surrounding on two-dimensional conductive Ti₃C₂T_X sheets, are in situ rooted on three-dimensional SnO₂ nanoparticles, constructing nanoscale TiO₂/SnO₂ heterojunctions. The fabrication is implemented in a controlled low-temperature anneal method in air and then in N₂ atmospheres. With the optimal MXene content, the optical property, the crystallinity of perovskite layer, and internal interfaces are all facilitated, contributing more amount of carrier with effective and rapid transferring in device. The champion power conversion efficiency of resultant perovskite solar cells achieves 19.14%, yet that of counterpart is just 16.83%. In addition, it can also maintain almost 85% of its initial performance for more than 45 days in 30-40% humidity air; comparatively, the counterpart declines to just below 75% of its initial performance.

SUBMITTER: Huang L

PROVIDER: S-EPMC7770768 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

MXene-based novel nanocomposites doped SnO2 for boosting the performance of perovskite solar cells.

Project description:Since being first published in 2018, the use of two-dimensional MXene in solar cells has attracted significant interest. This study presents, for the first time, the synthesis of an efficient hybrid electrocatalyst in the form of a nanocomposite (MXene/CoS)-SnO2 designed to function as a high-performance electron transfer layer (ETL). The study can be divided into three distinct parts. The first part involves the synthesis of single-layer Ti3C2Tx MXene nanosheets, followed by the preparation of a CoS solution. Subsequently, in the second part, the fabrication of MXene/CoS heterostructure nanocomposites is carried out, and a comprehensive characterization is conducted to evaluate the physical, structural, and optical properties. In the third part, the attention is on the crucial characterizations of the novel nanocomposite-electron transport layer (ETL) solution, significantly contributing to the evolution of perovskite solar cells. Upon optimising the composition, an exceptional power conversion efficiency of more than 17.69% is attained from 13.81% of the control devices with fill factor (FF), short-circuit current density (Jsc), and open-circuit voltage (Voc) were 66.51%, 20.74 mA/cm2, and 1.282 V. Therefore, this PCE is 21.93% higher than the control device. The groundbreaking MXene/CoS (2 mg mL-1) strategy reported in this research represents a promising and innovative avenue for the realization of highly efficient perovskite solar cells.

| S-EPMC11199647 | biostudies-literature

Dual Passivation of Perovskite and SnO2 for High-Efficiency MAPbI3 Perovskite Solar Cells.

Project description:So far, most techniques for modifying perovskite solar cells (PSCs) focus on either the perovskite or electron transport layer (ETL). For the sake of comprehensively improving device performance, a dual-functional method of simultaneously passivating trap defects in both the perovskite and ETL films is proposed that utilizes guidable transfer of Eu3+ in SnO2 to perovskite. Europium ions are distributed throughout the SnO2 film during the formation process of SnO2, and they can diffuse directionally through the SnO2/perovskite interface into the perovskite, while most of the europium ions remain at the interface. Under the synergistic effect of distributed Eu3+ in the SnO2 and aggregated Eu3+ at the interface, the electron mobilities of ETLs are evidently improved. Meanwhile, diffused Eu3+ ions passivate the perovskite to reduce trap densities at the grain boundaries, which can dramatically elevate the open-circuit voltage (V oc) of PSCs. Finally, the mainly PSCs coated on SnO2:Eu3+ ETL achieve a power conversion efficiency of 20.14%. Moreover, an unsealed device degrades by only 13% after exposure to ambient atmosphere for 84 days.

| S-EPMC7927604 | biostudies-literature

Low-Temperature Ionic Layer Adsorption and Reaction Grown Anatase TiO2 Nanocrystalline Films for Efficient Perovskite Solar Cell and Gas Sensor Applications.

Project description:A low-temperature (90 °C) and directly grown anatase titanium dioxide (TiO2) nanocrystalline film using successive ionic layer adsorption and reaction (SILAR) for perovskite solar cell and gas sensor applications. TiO2 nanocrystalline electron transfer layer (ETL) improves the power conversion efficiency (PCE) of perovskite solar cells due to faster charge transport kinetics as well as slower charge recombination process. The optimized TiO2 nanocrystalline ETL (15 L) demonstrates as high as ~10% PCE with a short circuit current density of 18.0 mA/cm2, open circuit voltage of 0.81 V and fill factor of 66.3% in perovskite solar cells. Furthermore, room-temperature ammonia sensing characteristics of TiO2 nanocrystalline film (25 L) were demonstrated for various concentration levels of ammonia in dry air conditions. A high room-temperature response of 80% was achieved at 100 ppm of ammonia with rapid response and recovery signatures of 30 and 85 s, and nearly fifteen days stability, respectively. The response of the sensor to other gases such as formaldehyde, petrol, ethanol acetone, and ammonia etc, indicated a high selectivity towards volatile organic compounds of ammonia gas. The room temperature operation, with high selectivity, repeatability and fast transition times, suggests potentially useful in flexible and cost-effective production in optoelectrochemical device technology.

| S-EPMC6054626 | biostudies-literature

MDACl2-Modified SnO2 Film for Efficient Planar Perovskite Solar Cells.

Project description:The electron transport layer (ETL) with excellent charge extraction and transport ability is one of the key components of high-performance perovskite solar cells (PSCs). SnO2 has been considered as a more promising ETL for the future commercialization of PSCs due to its excellent photoelectric properties and easy processing. Herein, we propose a facile and effective ETL modification strategy based on the incorporation of methylenediammonium dichloride (MDACl2) into the SnO2 precursor colloidal solution. The effects of MDACl2 incorporation on charge transport, defect passivation, perovskite crystallization, and PSC performance are systematically investigated. First, the surface defects of the SnO2 film are effectively passivated, resulting in the increased conductivity of the SnO2 film, which is conducive to electron extraction and transport. Second, the MDACl2 modification contributes to the formation of high-quality perovskite films with improved crystallinity and reduced defect density. Furthermore, a more suitable energy level alignment is achieved at the ETL/perovskite interface, which facilitates the charge transport due to the lower energy barrier. Consequently, the MDACl2-modified PSCs exhibit a champion efficiency of 22.30% compared with 19.62% of the control device, and the device stability is also significantly improved.

| S-EPMC10056177 | biostudies-literature

CdSe nanorod/TiO2 nanoparticle heterojunctions with enhanced solar- and visible-light photocatalytic activity.

Project description:CdSe nanorods (NRs) with an average length of ≈120 nm were prepared by a solvothermal process and associated to TiO2 nanoparticles (Aeroxide® P25) by annealing at 300 °C for 1 h. The content of CdSe NRs in CdSe/TiO2 composites was varied from 0.5 to 5 wt %. The CdSe/TiO2 heterostructured materials were characterized by XRD, TEM, SEM, XPS, UV-visible spectroscopy and Raman spectroscopy. TEM images and XRD patterns show that CdSe NRs with wurtzite structure are associated to TiO2 particles. The UV-visible spectra demonstrate that the narrow bandgap of CdSe NRs serves to increase the photoresponse of CdSe/TiO2 composites until ≈725 nm. The CdSe (2 wt %)/TiO2 composite exhibits the highest photocatalytic activity for the degradation of rhodamine B in aqueous solution under simulated sunlight or visible light irradiation. The enhancement in photocatalytic activity likely originates from CdSe sensitization of TiO2 and the heterojunction between these materials which facilitates electron transfer from CdSe to TiO2. Due to its high stability (up to ten reuses without any significant loss in activity), the CdSe/TiO2 heterostructured catalysts show high potential for real water decontamination.

| S-EPMC5753051 | biostudies-literature

cPCN-Regulated SnO2 Composites Enables Perovskite Solar Cell with Efficiency Beyond 23.

Project description:Efficient electron transport layers (ETLs) not only play a crucial role in promoting carrier separation and electron extraction in perovskite solar cells (PSCs) but also significantly affect the process of nucleation and growth of the perovskite layer. Herein, crystalline polymeric carbon nitrides (cPCN) are introduced to regulate the electronic properties of SnO2 nanocrystals, resulting in cPCN-composited SnO2 (SnO2-cPCN) ETLs with enhanced charge transport and perovskite layers with decreased grain boundaries. Firstly, SnO2-cPCN ETLs show three times higher electron mobility than pristine SnO2 while offering better energy level alignment with the perovskite layer. The SnO2-cPCN ETLs with decreased wettability endow the perovskite films with higher crystallinity by retarding the crystallization rate. In the end, the power conversion efficiency (PCE) of planar PSCs can be boosted to 23.17% with negligible hysteresis and a steady-state efficiency output of 21.98%, which is one of the highest PCEs for PSCs with modified SnO2 ETLs. SnO2-cPCN based devices also showed higher stability than pristine SnO2, maintaining 88% of the initial PCE after 2000 h of storage in the ambient environment (with controlled RH of 30% ± 5%) without encapsulation.

| S-EPMC8017043 | biostudies-literature

Photoexcitation-induced passivation of SnO2 thin film for efficient perovskite solar cells.

Project description:A high-quality tin oxide electron transport layer (ETL) is a key common factor to achieve high-performance perovskite solar cells (PSCs). However, the conventional annealing technique to prepare high-quality ETLs by continuous heating under near-equilibrium conditions requires high temperatures and a long fabrication time. Alternatively, we present a non-equilibrium, photoexcitation-induced passivation technique that uses multiple ultrashort laser pulses. The ultrafast photoexcitation and following electron-electron and electron-phonon scattering processes induce ultrafast annealing to efficiently passivate surface and bulk defects, and improve the crystallinity of SnO2, resulting in suppressing the carrier recombination and facilitating the charge transport between the ETL and perovskite interface. By rapidly scanning the laser beam, the annealing time is reduced to several minutes, which is much more efficient compared with conventional thermal annealing. To demonstrate the university and scalability of this technique, typical antisolvent and antisolvent-free processed hybrid organic-inorganic metal halide PSCs have been fabricated and achieved the power conversion efficiency (PCE) of 24.14% and 22.75% respectively, and a 12-square-centimeter module antisolvent-free processed perovskite solar module achieves a PCE of 20.26%, with significantly enhanced performance both in PCE and stability. This study establishes a new approach towards the commercialization of efficient low-temperature manufacturing of PSCs.

| S-EPMC10583279 | biostudies-literature

Enhanced Efficiency and Stability of Planar Perovskite Solar Cells Using a Dual Electron Transport Layer of Gold Nanoparticles Embedded in Anatase TiO2 Films.

Project description:Incorporating plasmonic nanostructures is a promising strategy to enhance both the optical and electrical characteristics of photovoltaic devices via more efficient harvesting of incident light. Herein, we report a facile fabrication scheme at low temperature for producing gold nanoparticles embedded in anatase TiO2 films, which can simultaneously improve the efficiency and stability of n-i-p planar heterojunction perovskite solar cells (PSCs). The PSCs based on rigid and flexible substrates with 0.2 wt % Au-TiO2/TiO2 dual electron transport layers (ETLs) achieved power conversion efficiencies up to 20.31 and 15.36%, superior to that of devices with TiO2 as a single ETL. Moreover, 0.2 wt % Au-TiO2/TiO2 devices demonstrated significant stability in light soaking, which is attributed to improved light absorption, low charge recombination loss, and enhanced carrier transport, and extraction with the plasmonic Au-TiO2/TiO2 dual ETL. The present work improves the practicability of high-performance and flexible PSCs by engineering the photogenerated carrier dynamics at the interface.

| S-EPMC7592386 | biostudies-literature

Hierarchical Branched Mesoporous TiO2-SnO2 Nanocomposites with Well-Defined n-n Heterojunctions for Highly Efficient Ethanol Sensing.

Project description:The direct assembly of functional nanoparticles into a highly crystalline mesoporous semiconductor with oriented configurations is challenging but of significance. Herein, an evaporation induced oriented co-assembly strategy is reported to incorporate SnO2 nanocrystals (NCs) into a 3D branched mesoporous TiO2 framework by using poly(ethylene oxide)-block-polystyrene (PEO-b-PS) as the template, SnO2 NCs as the direct tin source, and titanium butoxide (TBOT) as the titania precursor. Owing to the combined properties of ultrasmall particle size (3-5 nm), excellent dispersibility and presence of abundant hydroxyl groups, SnO2 NCs can easily interact with PEO block of the template through hydrogen bonding and co-assemble with hydrolyzed TBOT to form a novel hierarchical branched mesoporous structure (SHMT). After calcination, the obtained composites exhibit a unique 3D flower-like structure, which consists of numerous mesoporous rutile TiO2 branches with uniform cylindrical mesopores (≈9 nm). More importantly, the SnO2 NCs are homogeneously distributed in the mesoporous TiO2 matrix, forming numerous n-n heterojunctions. Due to the unique textual structures, the SHMT-based gas sensors show excellent gas sensing performance with fast response/recovery dynamics, high sensitivity, and selectivity toward ethanol.

| S-EPMC6918105 | biostudies-literature

Theoretical prediction and design for chalcogenide-quantum-dot/TiO2 heterojunctions for solar cell applications.

Project description:Quantum dot sensitized solar cells have attracted much attention due to their high efficiency of photoelectric conversion and low manufacturing cost. In this study, a series of heterojunction structures with cubic (MA)4 chalcogenide quantum dots adsorbing on the (001) surface of TiO2 were investigated, in order to explore new quantum dot sensitizers for solar cell applications. Our study revealed that sulfide and selenide quantum dots are more suitable for solar energy harvesting, compared to their oxide counterparts, due to their smaller ionization potentials and smaller HOMO-LUMO (highest occupied molecular orbital-lowest unoccupied molecular orbital) gaps, but in general exhibit weaker adsorption on TiO2. M4A3B and M4A2B2 quantum dots were designed in combination with the advantage of higher adsorption stability and photoelectric conversion capability. Our theoretical predictions for the structurally precise chalcogenide systems suggest a possible direction for the design of quantum-dot sensitized solar cells.

| S-EPMC9557743 | biostudies-literature