Browse
Submit Data
Databases
API
Help

Dataset Information

27 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Wire-Shaped 3D-Hybrid Supercapacitors as Substitutes for Batteries.

ABSTRACT: We report a wire-shaped three-dimensional (3D)-hybrid supercapacitor with high volumetric capacitance and high energy density due to an interconnected 3D-configuration of the electrode allowing for large number of electrochemical active sites, easy access of electrolyte ions, and facile charge transport for flexible wearable applications. The interconnected and compact electrode delivers a high volumetric capacitance (gravimetric capacitance) of 73 F cm^-3 (2446 F g^-1), excellent rate capability, and cycle stability. The 3D-nickel cobalt-layered double hydroxide onto 3D-nickel wire (NiCo LDH/3D-Ni)//the 3D-manganese oxide onto 3D-nickel wire (Mn₃O₄/3D-Ni) hybrid supercapacitor exhibits energy density of 153.3 Wh kg^-1 and power density of 8810 W kg^-1. The red light-emitting diode powered by the as-prepared hybrid supercapacitor can operate for 80 min after being charged for tens of seconds and exhibit excellent electrochemical stability under various deformation conditions. The results verify that such wire-shaped 3D-hybrid supercapacitors are promising alternatives for batteries with long charge-discharge times, for smart wearable and implantable devices.

SUBMITTER: Kang KN

PROVIDER: S-EPMC7770839 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

NiCo2O4/RGO Hybrid Nanostructures on Surface-Modified Ni Core for Flexible Wire-Shaped Supercapacitor.

Project description:In this work, we report surface-modified nickel (Ni) wire/NiCo2O4/reduced graphene oxide (Ni/NCO/RGO) electrodes fabricated by a combination of facile solvothermal and hydrothermal deposition methods for wire-shaped supercapacitor application. The effect of Ni wire etching on the microstructural, surface morphological and electrochemical properties of Ni/NCO/RGO electrodes was investigated in detail. On account of the improved hybrid nanostructure and the synergistic effect between spinel-NiCo2O4 hollow microspheres and RGO nanoflakes, the electrode obtained from Ni wire etched for 10 min, i.e., Ni10/NCO/RGO exhibits the lowest initial equivalent resistance (1.68 Ω), and displays a good rate capability with a volumetric capacitance (2.64 F/cm3) and areal capacitance (25.3 mF/cm2). Additionally, the volumetric specific capacitance calculated by considering only active material volume was found to be as high as 253 F/cm3. It is revealed that the diffusion-controlled process related to faradaic volume processes (battery type) contributed significantly to the surface-controlled process of the Ni10/NCO/RGO electrode compared to other electrodes that led to the optimum electrochemical performance. Furthermore, the wire-shaped supercapacitor (WSC) was fabricated by assembling two optimum electrodes in-twisted structure with gel electrolyte and the device exhibited 10 μWh/cm3 (54 mWh/kg) energy density and 4.95 mW/cm3 (27 W/kg) power density at 200 μA. Finally, the repeatability, flexibility, and scalability of WSCs were successfully demonstrated at various device lengths and bending angles.

| S-EPMC8066179 | biostudies-literature

Atomic Modulation of 3D Conductive Frameworks Boost Performance of MnO2 for Coaxial Fiber-Shaped Supercapacitors.

Project description:Coaxial fiber-shaped supercapacitors are a promising class of energy storage devices requiring high performance for flexible and miniature electronic devices. Yet, they are still struggling from inferior energy density, which comes from the limited choices in materials and structure used. Here, Zn-doped CuO nanowires were designed as 3D framework for aligned distributing high mass loading of MnO2 nanosheets. Zn could be introduced into the CuO crystal lattice to tune the covalency character and thus improve charge transport. The Zn-CuO@MnO2 as positive electrode obtained superior performance without sacrificing its areal and gravimetric capacitances with the increasing of mass loading of MnO2 due to 3D Zn-CuO framework enabling efficient electron transport. A novel category of free-standing asymmetric coaxial fiber-shaped supercapacitor based on Zn0.11CuO@MnO2 core electrode possesses superior specific capacitance and enhanced cell potential window. This asymmetric coaxial structure provides superior performance including higher capacity and better stability under deformation because of sufficient contact between the electrodes and electrolyte. Based on these advantages, the as-prepared asymmetric coaxial fiber-shaped supercapacitor exhibits a high specific capacitance of 296.6 mF cm-2 and energy density of 133.47 μWh cm-2. In addition, its capacitance retention reaches 76.57% after bending 10,000 times, which demonstrates as-prepared device's excellent flexibility and long-term cycling stability.

| S-EPMC8187521 | biostudies-literature

Carbon Nanotube Fibers Decorated with MnO2 for Wire-Shaped Supercapacitor.

Project description:Fibers made from CNTs (CNT fibers) have the potential to form high-strength, lightweight materials with superior electrical conductivity. CNT fibers have attracted great attention in relation to various applications, in particular as conductive electrodes in energy applications, such as capacitors, lithium-ion batteries, and solar cells. Among these, wire-shaped supercapacitors demonstrate various advantages for use in lightweight and wearable electronics. However, making electrodes with uniform structures and desirable electrochemical performances still remains a challenge. In this study, dry-spun CNT fibers from CNT carpets were homogeneously loaded with MnO2 nanoflakes through the treatment of KMnO4. These functionalized fibers were systematically characterized in terms of their morphology, surface and mechanical properties, and electrochemical performance. The resulting MnO2-CNT fiber electrode showed high specific capacitance (231.3 F/g) in a Na2SO4 electrolyte, 23 times higher than the specific capacitance of the bare CNT fibers. The symmetric wire-shaped supercapacitor composed of CNT-MnO2 fiber electrodes and a PVA/H3PO4 electrolyte possesses an energy density of 86 nWh/cm and good cycling performance. Combined with its light weight and high flexibility, this CNT-based wire-shaped supercapacitor shows promise for applications in flexible and wearable energy storage devices.

| S-EPMC8201185 | biostudies-literature

Carbon Redox-Polymer-Gel Hybrid Supercapacitors.

Project description:Energy storage devices that provide high specific power without compromising on specific energy are highly desirable for many electric-powered applications. Here, we demonstrate that polymer organic radical gel materials support fast bulk-redox charge storage, commensurate to surface double layer ion exchange at carbon electrodes. When integrated with a carbon-based electrical double layer capacitor, nearly ideal electrode properties such as high electrical and ionic conductivity, fast bulk redox and surface charge storage as well as excellent cycling stability are attained. Such hybrid carbon redox-polymer-gel electrodes support unprecedented discharge rate of 1,000C with 50% of the nominal capacity delivered in less than 2 seconds. Devices made with such electrodes hold the potential for battery-scale energy storage while attaining supercapacitor-like power performances.

| S-EPMC4768163 | biostudies-literature

Hybrid supercapacitors for reversible control of magnetism.

Project description:Electric field tuning of magnetism is one of the most intensely pursued research topics of recent times aiming at the development of new-generation low-power spintronics and microelectronics. However, a reversible magnetoelectric effect with an on/off ratio suitable for easy and precise device operation is yet to be achieved. Here we propose a novel route to robustly tune magnetism via the charging/discharging processes of hybrid supercapacitors, which involve electrostatic (electric-double-layer capacitance) and electrochemical (pseudocapacitance) doping. We use both charging mechanisms-occurring at the La0.74Sr0.26MnO3/ionic liquid interface to control the balance between ferromagnetic and non-ferromagnetic phases of La1-xSrxMnO3 to an unprecedented extent. A magnetic modulation of up to ?33% is reached above room temperature when applying an external potential of only about 2.0?V. Our case study intends to draw attention to new, reversible physico-chemical phenomena in the rather unexplored area of magnetoelectric supercapacitors.

| S-EPMC5436217 | biostudies-literature

Hierarchical N-Doped Porous Carbons for Zn-Air Batteries and Supercapacitors.

Project description:Nitrogen-doped carbon materials with a large specific surface area, high conductivity, and adjustable microstructures have many prospects for energy-related applications. This is especially true for N-doped nanocarbons used in the electrocatalytic oxygen reduction reaction (ORR) and supercapacitors. Here, we report a low-cost, environmentally friendly, large-scale mechanochemical method of preparing N-doped porous carbons (NPCs) with hierarchical micro-mesopores and a large surface area via ball-milling polymerization followed by pyrolysis. The optimized NPC prepared at 1000 °C (NPC-1000) offers excellent ORR activity with an onset potential (Eonset) and half-wave potential (E1/2) of 0.9 and 0.82 V, respectively (vs. a reversible hydrogen electrode), which are only approximately 30 mV lower than that of Pt/C. The rechargeable Zn-air battery assembled using NPC-1000 and the NiFe-layered double hydroxide as bifunctional ORR and oxygen evolution reaction electrodes offered superior cycling stability and comparable discharge performance to RuO2 and Pt/C. Moreover, the supercapacitor electrode equipped with NPC prepared at 800 °C exhibited a high specific capacity (431 F g-1 at 10 mV s-1), outstanding rate, performance, and excellent cycling stability in an aqueous 6-M KOH solution. This work demonstrates the potential of the mechanochemical preparation method of porous carbons, which are important for energy conversion and storage.

| S-EPMC7770743 | biostudies-literature

A Wire-Shaped Supercapacitor in Micrometer Size Based on Fe3O4 Nanosheet Arrays on Fe Wire.

Project description:One-dimensional (1D, wire- and fiber-shaped) supercapacitors have recently attracted interest due to their roll-up, micrometer size and potential applications in portable or wearable electronics. Herein, a 1D wire-shaped electrode was developed based on Fe3O4 nanosheet arrays connected on the Fe wire, which was prepared via oxidation of Fe wire in 0.1 M KCl solution (pH 3) with O2-rich environment under 70 °C. The obtained Fe3O4 nanosheet arrays displayed a high specific capacitance (20.8 mF cm-1 at 10 mV s-1) and long cycling lifespan (91.7% retention after 2500 cycles). The excellent performance may attribute to the connected nanosheet structure with abundant open spaces and the intimate contact between the Fe3O4 and iron substrate. In addition, a wire-shaped asymmetric supercapacitor was fabricated and had excellent capacitive properties with a high energy density (9 µWh cm-2) at power density of 532.7 µW cm-2 and remarkable long-term cycling performance (99% capacitance retention after 2000 cycles). Considering low cost and earth-abundant electrode material, as well as outstanding electrochemical properties, the assembled supercapacitor will possess enormous potential for practical applications in portable electronic device.

| S-EPMC6199038 | biostudies-literature

Optofluidic fabrication for 3D-shaped particles.

Project description:Complex three-dimensional (3D)-shaped particles could play unique roles in biotechnology, structural mechanics and self-assembly. Current methods of fabricating 3D-shaped particles such as 3D printing, injection moulding or photolithography are limited because of low-resolution, low-throughput or complicated/expensive procedures. Here, we present a novel method called optofluidic fabrication for the generation of complex 3D-shaped polymer particles based on two coupled processes: inertial flow shaping and ultraviolet (UV) light polymerization. Pillars within fluidic platforms are used to deterministically deform photosensitive precursor fluid streams. The channels are then illuminated with patterned UV light to polymerize the photosensitive fluid, creating particles with multi-scale 3D geometries. The fundamental advantages of optofluidic fabrication include high-resolution, multi-scalability, dynamic tunability, simple operation and great potential for bulk fabrication with full automation. Through different combinations of pillar configurations, flow rates and UV light patterns, an infinite set of 3D-shaped particles is available, and a variety are demonstrated.

| S-EPMC4421806 | biostudies-other

Prussian Blue Mg-Li Hybrid Batteries.

Project description:The major advantage of Mg batteries relies on their promise of employing an Mg metal negative electrode, which offers much higher energy density compared to graphitic carbon. However, the strong coulombic interaction of Mg2+ ions with anions leads to their sluggish diffusion in the solid state, which along with a high desolvation energy, hinders the development of positive electrode materials. To circumvent this limitation, Mg metal negative electrodes can be used in hybrid systems by coupling an Li+ insertion cathode through a dual salt electrolyte. Two "high voltage" Prussian blue analogues (average 2.3 V vs Mg/Mg2+; 3.0 V vs Li/Li+) are investigated as cathode materials and the influence of structural water is shown. Their electrochemical profiles, presenting two voltage plateaus, are explained based on the two unique Fe bonding environments. Structural water has a beneficial impact on the cell voltage. Capacities of 125 mAh g-1 are obtained at a current density of 10 mA g-1 (?C/10), while stable performance up to 300 cycles is demonstrated at 200 mA g-1 (?2C). The hybrid cell design is a step toward building a safe and high density energy storage system.

| S-EPMC5074312 | biostudies-literature

All-graphene-battery: bridging the gap between supercapacitors and lithium ion batteries.

Project description:Herein, we propose an advanced energy-storage system: all-graphene-battery. It operates based on fast surface-reactions in both electrodes, thus delivering a remarkably high power density of 6,450?W kg(-1)(total electrode) while also retaining a high energy density of 225?Wh kg(-1)(total electrode), which is comparable to that of conventional lithium ion battery. The performance and operating mechanism of all-graphene-battery resemble those of both supercapacitors and batteries, thereby blurring the conventional distinction between supercapacitors and batteries. This work demonstrates that the energy storage system made with carbonaceous materials in both the anode and cathode are promising alternative energy-storage devices.

| S-EPMC4055886 | biostudies-other

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data