Browse
Submit Data
Databases
API
Help

Dataset Information

29 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

A Hybrid Biofuel and Triboelectric Nanogenerator for Bioenergy Harvesting.

ABSTRACT: Various types of energy exist everywhere around us, and these energies can be harvested from multiple sources to power micro-/nanoelectronic system and even personal electronic products. In this work, we proposed a hybrid energy-harvesting system (HEHS) for potential in vivo applications. The HEHS consisted of a triboelectric nanogenerator and a glucose fuel cell for simultaneously harvesting biomechanical energy and biochemical energy in simulated body fluid. These two energy-harvesting units can work individually as a single power source or work simultaneously as an integrated system. This design strengthened the flexibility of harvesting multiple energies and enhanced corresponding electric output. Compared with any individual device, the integrated HEHS outputs a superimposed current and has a faster charging rate. Using the harvested energy, HEHS can power a calculator or a green light-emitting diode pattern. Considering the widely existed biomechanical energy and glucose molecules in the body, the developed HEHS can be a promising candidate for building in vivo self-powered healthcare monitoring system.

SUBMITTER: Li H

PROVIDER: S-EPMC7770853 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

A Spherical Hybrid Triboelectric Nanogenerator for Enhanced Water Wave Energy Harvesting.

Project description:Water waves are a continuously generated renewable source of energy. However, their random motion and low frequency pose significant challenges for harvesting their energy. Herein, we propose a spherical hybrid triboelectric nanogenerator (SH-TENG) that efficiently harvests the energy of low frequency, random water waves. The SH-TENG converts the kinetic energy of the water wave into solid?solid and solid?liquid triboelectric energy simultaneously using a single electrode. The electrical output of the SH-TENG for six degrees of freedom of motion in water was investigated. Further, in order to demonstrate hybrid energy harvesting from multiple energy sources using a single electrode on the SH-TENG, the charging performance of a capacitor was evaluated. The experimental results indicate that SH-TENGs have great potential for use in self-powered environmental monitoring systems that monitor factors such as water temperature, water wave height, and pollution levels in oceans.

| S-EPMC6266367 | biostudies-literature

Triboelectric Nanogenerator for Droplet Energy Harvesting Based on Hydrophobic Composites.

Project description:Triboelectric nanogenerators (TENG) have shown great potential in harvesting energy from water. For the TENG that harvests water energy, surface hydrophobicity is crucial for its performance. In this paper, we prepare a hydrophobic composite film of Polyvinylidene Fluoride/Polydimethylsiloxane/Polytetrafluoroethylene (PVDF/PDMS/PTFE) and an electrode of Polyaniline/Carbon nanotubes/Silver nanowires (PANI/CNTs/AgNWs) by electrospinning technology and a doping method, respectively, which are served as the friction layer and top electrode of TENG. The contact angle of the hydrophobic film and electrode both reach over 120°, which makes the separation process between water and the interface complete and promotes the output of TENG. The open-circuit voltage (Voc) and short-circuit current (Isc) can reach 150 V and 60 μA approximately. In addition, the composite electrode can be applied in the preparation of complex electrode shapes. Furthermore, the different reactions of TENG to different liquids indicate that it may contribute to liquid-type sensing systems. This work presents an efficient approach to fabricating hydrophobic films and electrodes, laying a foundation for the development of TENG for harvesting water energy.

| S-EPMC10419362 | biostudies-literature

Effective energy harvesting from a single electrode based triboelectric nanogenerator.

Project description:The arch-shaped single electrode based triboelectric nanogenerator (TENG) is fabricated using thin film of reduced graphene oxide nanoribbons (rGONRs) with polyvinylidene fluoride (PVDF) polymer used as binder to effectively convert mechanical energy into electrical energy. The incorporation of rGONRs in PVDF polymer enhances average surface roughness of rGONRs/PVDF thin film. With the combination of the enhancement of average roughness and production of functional groups, which indicate improve charge storage capacity of prepared film. Furthermore, the redox peaks obtained through cyclic voltammetry were identified more in rGONRs/PVDF composite in comparison to pristine rGONRs to confirm charge transfer capability of film. Herein, the output performance was discussed experimentally as well as theoretically, maximum voltage was obtained to be 0.35 V. The newly designed TENG to harvest mechanical energy and opens up many new avenues of research in the energy harvesting applications.

| S-EPMC5153641 | biostudies-literature

3D Printed Double Roller-Based Triboelectric Nanogenerator for Blue Energy Harvesting.

Project description:The ocean covers 70% of the earth's surface and is one of the largest uncultivated resources still available for harvesting energy. The triboelectric energy harvesting technology has the potential to effectively convert the ocean's "blue energy" into electricity. A half-cylinder structure including rollers floating on the water has already been used, in which the pendulum motion of the rollers is driven by the waveform. For the stable motion of the rollers, the printed surface of the device was treated with acetone for attaining hydrophilicity. The electrical outputs with the proposed device were enhanced by increasing the contact surface area by simply implementing the double roller structure with double side-covered electrodes. With the optimized structure, the maximum power density reached a value of 69.34 µW m-2 at a load resistance of 200 MΩ with the device's high output durability. Finally, the fabricated device was also applied to the artificial water waves to demonstrate the possibility of using this device in the ocean. By simply modifying the electrode structure and adding a roller, this device demonstrated the ability to generate over 160% of electrical output with the same covered area of the ocean by the triboelectric nanogenerators (TENGs) and potential ocean application.

| S-EPMC8469981 | biostudies-literature

Harvesting Water-Evaporation-Induced Electricity Based on Liquid-Solid Triboelectric Nanogenerator.

Project description:Harvesting energy from natural water evaporation has been proposed as a promising alternative to supply power for self-powered and low-power devices and systems, owing to its spontaneous, ubiquitous, and sustainability. Herein, an approach is presented for harvesting water-evaporation-induced electricity based on liquid-solid triboelectric nanogenerators (LS-TENGs), which has various advantages of easy preparation, substrate needless, and robustness. This developed harvester with porous Al2 O3 ceramic sheet can generate a continuous and stable direct current of ≈0.3 µA and voltage of ≈0.7 V by optimizing the sheet physical dimensions and ambient parameters such as relative humidity, temperature, wind velocity, and ion concentration. The output power also can be improved significantly by series or parallel connection the harvesters, which has superior electrical compatibility and environmental suitability. The development of the water-evaporation-induced electricity harvesting shows many application prospects including power supply for digital calculator and charging capacitor. This research provides an in-depth experimental study on water-evaporation-induced electricity harvesting based on LS-TENGs and an efficient approach to supply electricity for low-power devices.

| S-EPMC9189656 | biostudies-literature

Highly transparent triboelectric nanogenerator for harvesting water-related energy reinforced by antireflection coating.

Project description:Water-related energy is an inexhaustible and renewable energy resource in our environment, which has huge amount of energy and is not largely dictated by daytime and sunlight. The transparent characteristic plays a key role in practical applications for some devices designed for harvesting water-related energy. In this paper, a highly transparent triboelectric nanogenerator (T-TENG) was designed to harvest the electrostatic energy from flowing water. The instantaneous output power density of the T-TENG is 11.56?mW/m(2). Moreover, with the PTFE film acting as an antireflection coating, the maximum transmittance of the fabricated T-TENG is 87.4%, which is larger than that of individual glass substrate. The T-TENG can be integrated with silicon-based solar cell, building glass and car glass, which demonstrates its potential applications for harvesting waste water energy in our living environment and on smart home system and smart car system.

| S-EPMC4357854 | biostudies-other

A Mousepad Triboelectric-Piezoelectric Hybrid Nanogenerator (TPHNG) for Self-Powered Computer User Behavior Monitoring Sensors and Biomechanical Energy Harvesting.

Project description:Hybrid nanogenerators based on the principle of surface charging of functional films are significant in self-powering sensing and energy conversion devices due to their multiple functions and high conversion efficiency, although applications remain limited due to a lack of suitable materials and structures. Here, we investigate a triboelectric-piezoelectric hybrid nanogenerator (TPHNG) in the form of a mousepad for computer user behavior monitoring and energy harvesting. Triboelectric and piezoelectric nanogenerators with different functional films and structures work independently to detect sliding and pressing movements, and the profitable coupling between the two nanogenerators leads to enhanced device outputs/sensitivity. Different mouse operations such as clicking, scrolling, taking-up/putting-down, sliding, moving rate, and pathing can be detected by the device via distinguishable patterns of voltage ranging from 0.6 to 36 V. Based on operation recognition, human behavior monitoring is realized, with monitoring of tasks such as browsing a document and playing a computer game being successfully demonstrated. Energy harvesting from mouse sliding, patting, and bending of the device is realized with output voltages up to 37 V and power up to 48 μW while exhibiting good durability up to 20,000 cycles. This work presents a TPHNG utilizing surface charging for self-powered human behavior sensing and biomechanical energy harvesting.

| S-EPMC10255169 | biostudies-literature

A triboelectric nanogenerator based on cosmetic fixing powder for mechanical energy harvesting.

Project description:In this work, we use commercial powder particulates (a cosmetic fixing powder) as triboelectric materials for constructing a triboelectric nanogenerator (CFP-TENG). Through finger pressing, the CFP-TENG generated approximate open-circuit voltage, short-circuit current, and maximum power density values of 1141 V, 521 µA, and 570.96 μW/cm2, respectively. Thirty-seven commercial blue LEDs can be easily lit up by the CFP-TENG. Moreover, this TENG, which was designed as a novel palette structure for harvesting mechanical energy from bicycle motion, serves as a self-powered bicycle speed sensor. In addition, the cosmetic fixing powder can be used as an effective material to enhance the triboelectric property of skin. This study provides an effective method for developing a cost-effective TENG without the use of complex surface micro-/nano-texturing.

| S-EPMC6799839 | biostudies-literature

A Contact-Mode Triboelectric Nanogenerator for Energy Harvesting from Marine Pipe Vibrations.

Project description:Structural health monitoring is of great significance to ensure the safety of marine pipes, while powering the required monitoring sensors remains a problem because the ocean environment is not amenable to the traditional ways of providing an external power supply. However, mechanical energy due to the vortex-induced vibration of pipelines may be harvested to power those sensors, which is a convenient, economic and environmentally friendly way. We here exploit a contact-separation mode triboelectric nanogenerator (TENG) to create an efficient energy harvester to transform the mechanical energy of vibrating pipes into electrical energy. The TENG device is composed of a tribo-pair of dielectric material films that is connected to a mass-spring base to guarantee the contact-separation motions of the tribo-pair. Experimental tests are conducted to demonstrate the output performance and long-term durability of the TENG device by attaching it to a sample pipe. A theoretical model for the energy harvesting system is developed for predicting the electrical output performance of the device. It is established that the normalized output power depends only on two compound variables with all typical factors taken into consideration simultaneously. The simple scale law is useful to reveal the underlying mechanism of the device and can guideline the optimization of the device based on multi-parameters analyses. The results here may provide references for designing contact-mode TENG energy harvesting devices based on the vibration of marine pipes and similar structures.

| S-EPMC7926989 | biostudies-literature

A Shared-Electrode and Nested-Tube Structure Triboelectric Nanogenerator for Motion Energy Harvesting.

Project description:Triboelectric nanogenerators with the function of harvesting human motion energy have attracted wide attention. Here, we demonstrate a shared-electrode and nested-tube structure triboelectric nanogenerator (SNTN) for harvesting human motion energy. The design of the SNTN employs flexible silicone rubber as the negative friction material and Ni-coated polyester conductive textile as the positive friction material and the electrode material. The entire structure consists of an inner triboelectric unit and an outer triboelectric unit. The inner triboelectric unit is formed by a hollow inner tube and a hollow middle tube, while the hollow middle tube and a hollow outer tube constitute the outer triboelectric unit. The hollow middle tube is used as the shared tube, and the electrode in the middle tube is used as the shared electrode of the two triboelectric units. Our research demonstrates that the output performance of the SNTN was improved significantly compared with a single triboelectric unit due to the cooperation of the two triboelectric units. When the SNTN is pressed by 300 N external force, output open-circuit voltage of 180 V and output short-circuit current of 8.5 ?A can be obtained. The output electrical energy can light up 31 light-emitting diodes (LEDs) connected serially (displaying "XZTC") and can drive a digital clock after rectifying storage, which shows application prospects in the field of illuminating devices and portable electronics.

| S-EPMC6843896 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data