Browse
Submit Data
Databases
API
Help

Dataset Information

28 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Rational Design of Porous N-Ti₃C₂ MXene@CNT Microspheres for High Cycling Stability in Li-S Battery.

ABSTRACT: Herein, N-Ti₃C₂@CNT microspheres are successfully synthesized by the simple spray drying method. In the preparation process, HCl-treated melamine (HTM) is selected as the sources of carbon and nitrogen. It not only realizes in situ growth of CNTs on the surface of MXene nanosheets with the catalysis of Ni, but also introduces efficient N-doping in both MXene and CNTs. Within the microsphere, MXene nanosheets interconnect with CNTs to form porous and conductive network. In addition, N-doped MXene and CNTs can provide strong chemical immobilization for polysulfides and effectively entrap them within the porous microspheres. Above-mentioned merits enable N-Ti₃C₂@CNT microspheres to be ideal sulfur host. When used in lithium-sulfur (Li-S) battery, the N-Ti₃C₂@CNT microspheres/S cathode delivers initial specific capacity of 927 mAh g^-1 at 1 C and retains high capacity of 775 mAh g^-1 after 1000 cycles with extremely low fading rate (FR) of 0.016% per cycle. Furthermore, the cathode still shows high cycling stability at high C-rate of 4 C (capacity of 647 mAh g^-1 after 650 cycles, FR 0.027%) and high sulfur loading of 3 and 6 mg cm^-2 for Li-S batteries.

SUBMITTER: Wang J

PROVIDER: S-EPMC7770867 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Self-assembled hierarchical porous NiMn2O4 microspheres as high performance Li-ion battery anodes.

Project description:Hierarchical structured porous NiMn2O4 microspheres assembled with nanorods are synthesized through a simple hydrothermal method followed by calcination in air. As anode materials for lithium ion batteries (LIBs), the NiMn2O4 microspheres exhibit a high specific capacity. The initial discharge capacity is 1126 mA h g-1. After 1000 cycles, the NiMn2O4 demonstrates a reversible capacity of 900 mA h g-1 at a current density of 500 mA g-1. In particular, the porous NiMn2O4 microspheres still could deliver a remarkable discharge capacity of 490 mA h g-1 even at a high current density of 2 A g-1, indicating their potential application in Li-ion batteries. This excellent electrochemical performance is ascribed to the unique hierarchical porous structure which can provide sufficient contact for the transfer of Li+ ion and area for the volume change of the electrolyte leading to enhanced Li+ mobility.

| S-EPMC9091966 | biostudies-literature

Metallic Ti3O5 hierarchical porous microspheres with an enhanced photothermal property.

Project description:γ-Ti3O5 is one kind of prominent non-stoichiometric metal oxide due to its intriguing ability in electric and electrochemical behaviors. This work reports another attractive property of γ-Ti3O5 hierarchical porous microspheres, the extremely effective photothermal property with a high photothermal conversion efficiency. Theory and experimental results indicate that γ-Ti3O5 hierarchical porous microspheres possess metallic features and display very strong localized surface plasma resonance effects over the visible and near-infrared region. Under simulated sunlight or near infrared light, the metallic γ-Ti3O5 exhibits a photothermal conversion efficiency of up to 65.29%. Under irradiation by a near-infrared laser with a wavelength of 808 nm, the γ-Ti3O5 hierarchical porous microspheres can significantly inhibit cancer cell viability in vitro and disrupt tumor tissue growth in vivo in a short period. In vitro and in vivo toxicity experiments demonstrate that it has good biocompatibility. The ultrahigh photothermal conversion efficiency and biocompatibility make the γ-Ti3O5 very attractive for technological uses in photothermal therapy, solar energy utilization, and infrared light detection and so on.

| S-EPMC9047538 | biostudies-literature

Microalgae-Templated Spray Drying for Hierarchical and Porous Fe3O4/C Composite Microspheres as Li-ion Battery Anode Materials.

Project description:A method of microalgae-templated spray drying to develop hierarchical porous Fe3O4/C composite microspheres as anode materials for Li-ion batteries was developed. During the spray-drying process, individual microalgae serve as building blocks of raspberry-like hollow microspheres via self-assembly. In the present study, microalgae-derived carbon matrices, naturally doped heteroatoms, and hierarchical porous structural features synergistically contributed to the high electrochemical performance of the Fe3O4/C composite microspheres, enabling a discharge capacity of 1375 mA·h·g-1 after 700 cycles at a current density of 1 A/g. Notably, the microalgal frameworks of the Fe3O4/C composite microspheres were maintained over the course of charge/discharge cycling, thus demonstrating the structural stability of the composite microspheres against pulverization. In contrast, the sample fabricated without microalgal templating showed significant capacity drops (up to ~40% of initial capacity) during the early cycles. Clearly, templating of microalgae endows anode materials with superior cycling stability.

| S-EPMC7589054 | biostudies-literature

Formation of toroidal Li2O2 in non-aqueous Li-O2 batteries with Mo2CT x MXene/CNT composite.

Project description:Due to the growing demand for high energy density devices, Li-O2 batteries are considered as a next generation energy storage system. The battery performance is highly dependent on the Li2O2 morphology, which arises from formation pathways such as the surface growth and the solution growth models. Thus, controlling the formation pathway is important in designing cathode materials. Herein for the first time, we controlled the Li2O2 formation pathway by using Mo2CT x MXene on a catalyst support. The cathode was fabricated by mixing the positively charged CNT/CTAB solution with the negatively charged Mo2CT x solution. After introducing Mo2CT x , important battery performance metrics were considerably enhanced. More importantly, the discharge product analysis showed that the functional groups on the surface of Mo2CT x inhibit the adsorption of O2 on the cathode surface, resulting in the formation of toroidal Li2O2 via the solution growth model. It was supported by density functional theory (DFT) calculations that adsorption of O2 on the Mo2CT x surface is implausible due to the large energy penalty for the O2 adsorption. Therefore, the introduction of MXene with abundant functional groups to the cathode surface can provide a cathode design strategy and can be considered as a universal method in generating toroidal Li2O2 morphology.

| S-EPMC9076372 | biostudies-literature

Anchoring NiO Nanosheet on the Surface of CNT to Enhance the Performance of a Li-O2 Battery.

Project description:Li2O2, as the cathodic discharge product of aprotic Li-O2 batteries, is difficult to electrochemically decompose. Transition-metal oxides (TMOs) have been proven to play a critical role in promoting the formation and decomposition of Li2O2. Herein, a NiO/CNT catalyst was prepared by anchoring a NiO nanosheet on the surface of CNT. When using the NiO/CNT as a cathode catalyst, the Li-O2 battery had a lower overpotential of 1.2 V and could operate 81 cycles with a limited specific capacity of 1000 mA h g-1 at a current density of 100 mA g-1. In comparison, with CNT as a cathodic catalyst, the battery could achieve an overpotential of 1.64 V and a cycling stability of 66 cycles. The introduction of NiO effectively accelerated the generation and decomposition rate of Li2O2, further improving the battery performance. SEM and XRD characterizations confirmed that a Li2O2 film formed during the discharge process and could be fully electrochemical decomposed in the charge process. The internal network and nanoporous structure of the NiO/CNT catalyst could provide more oxygen diffusion channels and accelerate the decomposition rate of Li2O2. These merits led to the Li-O2 battery's better performance.

| S-EPMC9320305 | biostudies-literature

Rational Design of Ti3C2Tx MXene Inks for Conductive, Transparent Films.

Project description:Transparent conductive electrodes (TCEs) with a high figure of merit (FOMe, defined as the ratio of transmittance to sheet resistance) are crucial for transparent electronic devices, such as touch screens, micro-supercapacitors, and transparent antennas. Two-dimensional (2D) titanium carbide (Ti3C2Tx), known as MXene, possesses metallic conductivity and a hydrophilic surface, suggesting dispersion stability of MXenes in aqueous media allowing the fabrication of MXene-based TCEs by solution processing. However, achieving high FOMe MXene TCEs has been hindered mainly due to the low intrinsic conductivity caused by percolation problems. Here, we have managed to resolve these problems by (1) using large-sized Ti3C2Tx flakes (∼12.2 μm) to reduce interflake resistance and (2) constructing compact microstructures by blade coating. Consequently, excellent optoelectronic properties have been achieved in the blade-coated Ti3C2Tx films, i.e., a DC conductivity of 19 325 S cm-1 at transmittances of 83.4% (≈6.7 nm) was obtained. We also demonstrate the applications of Ti3C2Tx TCEs in transparent Joule heaters and the field of supercapacitors, showing an outstanding Joule heating effect and high rate response, respectively, suggesting enormous potential applications in flexible, transparent electronic devices.

| S-EPMC9979651 | biostudies-literature

Double transition metal MXene (TixTa4-xC3) 2D materials as anodes for Li-ion batteries.

Project description:A bi-metallic titanium-tantalum carbide MXene, TixTa(4-x)C3 is successfully prepared via etching of Al atoms from parent TixTa(4-x)AlC3 MAX phase for the first time. X-ray diffractometer and Raman spectroscopic analysis proved the crystalline phase evolution from the MAX phase to the lamellar MXene arrangements. Also, the X-ray photoelectron spectroscopy (XPS) study confirmed that the synthesized MXene is free from Al after hydro fluoric acid (HF) etching process as well as partial oxidation of Ti and Ta. Moreover, the FE-SEM and TEM characterizations demonstrate the exfoliation process tailored by the TixTa(4-x)C3 MXene after the Al atoms from its corresponding MAX TixTa(4-x)AlC3 phase, promoting its structural delamination with an expanded interlayer d-spacing, which can allow an effective reversible Li-ion storage. The lamellar TixTa(4-x)C3 MXene demonstrated a reversible specific discharge capacity of 459 mAhg-1 at an applied C-rate of 0.5 °C with a capacity retention of 97% over 200 cycles. An excellent electrochemical redox performance is attributed to the formation of a stable, promising bi-metallic MXene material, which stores Li-ions on the surface of its layers. Furthermore, the TixTa(4-x)C3 MXene anode demonstrate a high rate capability as a result of its good electron and Li-ion transport, suggesting that it is a promising candidate as Li-ion anode material.

| S-EPMC7804453 | biostudies-literature

Porous Ti3C2Tx MXene Membranes for Highly Efficient Salinity Gradient Energy Harvesting.

Project description:Extracting osmotic energy through nanoporous membranes is an efficient way to harvest renewable and sustainable energy using the salinity gradient between seawater and river water. Despite recent advances of nanopore-based membranes, which have revitalized the prospect of blue energy, their energy conversion is hampered by nanomembrane issues such as high internal resistance or low selectivity. Herein, we report a lamellar-structured membrane made of nanoporous Ti3C2Tx MXene sheets, exhibiting simultaneous enhancement in permeability and ion selectivity beyond their inherent trade-off. The perforated nanopores formed by facile H2SO4 oxidation of the sheets act as a network of cation channels that interconnects interplanar nanocapillaries throughout the lamellar membrane. The constructed internal nanopores lower the energy barrier for cation passage, thereby boosting the preferential ion diffusion across the membrane. A maximum output power density of the nanoporous Ti3C2Tx MXene membranes reaches up to 17.5 W·m-2 under a 100-fold KCl gradient at neutral pH and room temperature, which is as high as by 38% compared to that of the pristine membrane. The membrane design strategy employing the nanoporous two-dimensional sheets provides a promising approach for ion exchange, osmotic energy extraction, and other nanofluidic applications.

| S-EPMC8793134 | biostudies-literature

Hard Carbon and Li4Ti5O12-Based Physically Mixed Anodes for Superior Li-Battery Performance with Significantly Reduced Li Content: A Case of Synergistic Materials Cooperation.

Project description:Li4Ti5O12 (LTO) and hard carbon (HC) are commonly used anodes in the Li-ion batteries. LTO has an operating voltage of 1.55 V and exhibits high-rate performance but with limited capacity. HC has high specific capacity but extremely low operating voltage. Herein, we show that a simple physical mixture of the two enhances the half-cell as well as full-cell performance through a synergistic cooperation between the materials. Specifically, the LTO-HC mixed anodes exhibit impressive performance even at high C-rates. This results from a quick internalization of Li ions by LTO followed by their distribution to HC regions via the high density of the winding internal interfaces between the two. The full cells of the LTO-HC mixed anodes with LiCoO2 (LCO) evince an enhanced operating voltage window and a well-defined plateau. Because of a reduced irreversible capacity loss in the LCO/mixed anode full cells, the overall specific capacity is better than the LCO/pristine anode full cells. Also, with the LTO-HC 20-80 anode (Li content reduced by 80%), the full cell exhibits an impressive performance when compared to pristine anodes without pre-lithiation. The LCO/mixed anode full cells have excellent cycling stability up to 500 cycles at a current density of 100 mA g-1.

| S-EPMC6645524 | biostudies-literature

Expanded graphite incorporated with Li4Ti5O12 nanoparticles as a high-rate lithium-ion battery anode.

Project description:Due to their small interlayer spacing and a low lithiation potential close to Li+ deposition, current graphite anodes suffer from weak kinetics, and lithium deposition in a fast-charging process, hindering their practical application in high-power lithium-ion batteries (LIBs). In this work, expanded graphite incorporated with Li4Ti5O12 nanoparticles (EG/LTO) was synthesized via moderate oxidization of artificial graphite following a solution coating process. The EG/LTO has sufficient porosity for fast Li+ diffusion and a dense Li4Ti5O12 layer for decreased interface reaction resistance, resulting in excellent fast-charging properties. EG/LTO presented a high reversible capacity of 272.8 mA h g-1 at 3.74 A g-1 (10C), much higher than that of the original commercial graphite (50.1 mA h g-1 at 10C) and even superior to that of hard carbon. In addition, EG/LTO exhibited capacity retention rate of 98.4% after 500 cycles at 10C, demonstrating high structural stability during a long cycling process. This study provides a protocol for a solution chemistry method to prepare fast-charging graphite anode materials with high stability for high-power LIBs.

| S-EPMC11002838 | biostudies-literature