Browse
Submit Data
Databases
API
Help

Dataset Information

10 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Developing multiplex ddPCR assays for SARS-CoV-2 detection based on probe mix and amplitude based multiplexing.

ABSTRACT: Introduction: With the ongoing SARS-CoV-2 pandemic, different articles have been published highlighting the superiority of droplet digital PCR (ddPCR) over the gold-standard reverse transcription PCR (RT-PCR) in SARS-CoV-2 detection. However, few studies have been reported on developing multiplex ddPCR assays for SARS-CoV-2 detection and their performance. This study shows steps on how to develop different ddPCR SAR-CoV-2 assays including higher order multiplex assays for SARS-CoV-2 detection and antiviral screening.Methods: Using multiple primer/probe sets, we developed, optimized, and analyzed the performance of simplex (1 target), duplex (2 targets), triplex probe mix (3 targets), and quadruplex (4 targets) SARS-CoV-2 ddPCR assays based on a two-color ddPCR detection system.Results: Results showed that the quadruplex assay had similar limits of detection and accuracy to the lower multiplex assays. Analyzing 94 clinical samples demonstrated that the ddPCR triplex probe mix assay had better sensitivity than the RT-qPCR assay. Additionally, the ddPCR multiplex assay showed that remdesivir could inhibit the growth of SARS-CoV-2 in vitro while another testing drug could not.Conclusion: Our research shows that developing multiplex ddPCR assays is possible by combing probe mix and amplitude-based multiplexing, which will help in developing multiplexed ddPCR assays for different SARS-CoV-2 applications.

SUBMITTER: Nyaruaba R

PROVIDER: S-EPMC7784781 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

MAPD: a probe design suite for multiplex ligation-dependent probe amplification assays.

Project description:BackgroundMultiplex ligation-dependent probe amplification (MLPA) was originally described as an efficient and reliable technique for gene dosage or DNA copy number variation (CNV) analysis. Due to its low cost, reliability, sensitivity, and relative simplicity, MLPA has rapidly gained acceptance in research and diagnostic laboratories, and fills the gap between genome-wide analysis and single gene analysis. A number of new applications have been developed shortly after the introduction of MLPA, including methylation-specific MLPA (MS-MLPA), the use of MLPA in SNP genotyping, copy number analysis in segmentally duplicated regions, etc. However, probe design is time consuming and error prone. Recently software has been developed to help human genomic MLPA probe selection and optimization. For other genomes and MS-MLPA, probe design remains a challenge.FindingsThis paper describes a number of new features added to the previous H-MAPD software, which include: 1) probe selection for MS-MLPA; 2) support of mouse and rat genomes; 3) a set of new stuffer sequences. In addition, a physical-chemical property verification tool was implemented to verify user defined probes.ConclusionsMAPD is a web-based tool which is freely available to non-commercial users. The previous H-MAPD software has been used by about 200 users from more than 30 countries. With the new features, the author hopes MAPD will bring more convenience to the MLPA community.

| S-EPMC2893534 | biostudies-literature

Multiplexing fluorogenic esterase-based viability assay with luciferase assays.

Project description:Luciferase-based reporter assays are one of the most common cell-based screening formats for drug discovery, and simultaneous evaluation of the cytotoxic effect of test compounds is of great value in reducing false-positives. Here we share a multiplex assay protocol that allows sequential measurement of cell viability (cell number) and luciferase activity of the same sample in a multi-well-plate format. The viability assay employs a fluorogenic esterase substrate, CytoRed. •This protocol allows sequential measurement of endogenous esterase activity (as a surrogate for cell number) and then luciferase activity in a single sample.•The protocol eliminates the need for parallel viability assay or protein assay using separate aliquots of the lysate.•This protocol is especially useful for assays with cells stably expressing a luciferase construct, for which co-transfection of another reporter gene is not a viable option.

| S-EPMC6812399 | biostudies-literature

Novel RT-ddPCR Assays for determining the transcriptional profile of SARS-CoV-2.

Project description:The exact mechanism of coronavirus replication and transcription is not fully understood; however, a hallmark of coronavirus transcription is the generation of negative-sense RNA intermediates that serve as the templates for the synthesis of positive-sense genomic RNA (gRNA) and an array of subgenomic mRNAs (sgRNAs) encompassing sequences arising from discontinuous transcription. Existing PCR-based diagnostic assays for SAR-CoV-2 are qualitative or semi-quantitative and do not provide the resolution needed to assess the complex transcription dynamics of SARS-CoV-2 over the course of infection. We developed and validated a novel panel of specially designed SARS-CoV-2 ddPCR-based assays to map the viral transcription profile. Application of these assays to clinically relevant samples will enhance our understanding of SARS-CoV-2 replication and transcription and may also inform the development of improved diagnostic tools and therapeutics.HighlightsWe developed a novel panel of 7 quantitative RT-ddPCRs assays for SARS-Cov-2Our panel targets nongenic and genic regions in genomic and subgenomic RNAsAll assays detect 1-10 copies and are linear over 3-4 orders of magnitudeAll assays correlated with the clinical Abbott SARS-CoV-2 Viral Load AssayClinical samples showed higher copy numbers for targets at the 3' end of the genome.

| S-EPMC7814816 | biostudies-literature

Human MLPA Probe Design (H-MAPD): a probe design tool for both electrophoresis-based and bead-coupled human multiplex ligation-dependent probe amplification assays.

Project description:BACKGROUND: Multiplex ligation-dependent probe amplification (MLPA) is an efficient and reliable technique for gene dosage analysis. Currently MLPA can be conducted on two platforms: traditional electrophoresis-based, and FlexMAP bead-coupled. Since its introduction in 2002, MLPA has been rapidly adopted in both clinical and research situations. However, MLPA probe design is a time consuming process requiring many steps that address multiple criteria. There exist only one or two commercial software packages for traditional electrophoresis-based MLPA probe design. To our knowledge, no software is yet available that performs bead-coupled MLPA probe design. RESULTS: We have developed H-MAPD, a web-based tool that automates the generation and selection of probes for human genomic MLPA. The software performs physical-chemical property tests using UNAFold software, and uniqueness tests using the UCSC genome browser. H-MAPD supports both traditional electrophoresis-based assays, as well as FlexMAP bead-coupled MLPA. CONCLUSION: H-MAPD greatly reduces the efforts for human genomic MLPA probe design. The software is written in Perl-CGI, hosted on a Linux server, and is freely available to non-commercial users.

| S-EPMC2547856 | biostudies-other

Multiplexing primer/probe sets for detection of SARS-CoV-2 by qRT-PCR.

Project description:BackgroundThe novel respiratory virus SARS-CoV-2, responsible for over 380,000 COVID-19 related deaths, has caused significant strain on healthcare infrastructure and clinical laboratories globally. The pandemic's initial challenges include broad diagnostic testing, consistent reagent supply lines, and access to laboratory instruments and equipment. In early 2020, primer/probe sets distributed by the CDC utilized the same fluorophore for molecular detection - requiring multiple assays to be run in parallel - consuming valuable and limited resources.MethodsNasopharyngeal swabs submitted to UW Virology for SARS-CoV-2 clinical testing were extracted, amplified by our laboratory developed test (LDT) - a CDC-based quantitative reverse transcriptase PCR reaction - and analyzed for agreement between the multiplexed assay. Laboratory- confirmed respiratory infection samples were included to evaluate assay cross-reaction specificity.ResultsTriplexing correctly identified SARS-CoV-2 in 98.4% of confirmed positive or inconclusive patient samples by single-plex LDT (n?=?183/186). All 170 SARS-CoV-2 negative samples tested by single-plex LDT were negative by triplexing. Other laboratory-confirmed respiratory infections did not amplify for SARS-CoV-2 in the triplex reaction.ConclusionsMultiplexing two virus-specific gene targets and an extraction control was found to be comparable to running parallel assays independently, while significantly improving assay throughput.

| S-EPMC7278635 | biostudies-literature

Antibody mix-and-read assays based on fluorescence intensity probes.

Project description:Antibodies and Fc fusion proteins are a rapidly growing class of pharmaceuticals. Cell culture and purification process development and operation require frequent measurement of product concentrations, commonly by complex enzyme-linked immunosorbent assay and high-performance liquid chromatography methods. Here we report a fast (<30 s), and simple antibody Fc assay based on mix-and-read reporting by fluorescence emission. A soluble fluorescein-labeled Fc-affinity reporter produced by standard peptide synthesis is mixed with an Fc-containing sample to produce an immediate shift in both fluorescence polarization and intensity, compatible with on- and at-line measurements and microbioreactor monitoring. We observed significant shifts in fluorescence intensity in Chinese hamster ovary cell culture fluid spiked with IgG and detected an adalimumab biosimilar down to 100 ng/mL (10-4 g/L), despite the interferents in the complex sample matrix. Neither the fluorescence polarization nor the fluorescence intensity assay is significantly affected by the addition of clarified lysate of 2 million CHO-k1 cells/mL, suggesting applicability even to cultures of low viability. Biochemical and molecular docking approaches suggest that the fluorescence intensity enhancement is caused by changes in the fluorophore's local microenvironment upon binding to IgG Fc, especially by interactions with Fc His433.Abbreviations: CCF: Cell Culture Fluid; CHO: Chinese Hamster Ovary cells; ELISA: Enzyme Linked Immunosorbent Assay; Fc: Fragment Crystallizable of antibody; HPLC: High-Performance Liquid Chromatography; HPβCD: hydroxypropyl-β-cyclodextrin; IgG: ImmunoglobulinG; mAb: Monoclonal Antibody; PBS: Phosphate-Buffered Saline; PDB: Protein Data Bank; SpA: Staphylococcal protein A; SpG: Staphylococcal protein G.

| S-EPMC8525972 | biostudies-literature

Development of a new methylation-based fetal fraction estimation assay using multiplex ddPCR.

Project description:BackgroundNon-invasive prenatal testing (NIPT) for fetal aneuploidies has rapidly been incorporated into clinical practice. Current NGS-based methods can reliably detect fetal aneuploidies non-invasively with fetal fraction of at least 4%. Inaccurate fetal fraction assessment can compromise the accuracy of the test as affected samples with low fetal fraction have an increased risk for misdiagnosis. Using a novel set of fetal-specific differentially methylated regions (DMRs) and methylation sensitive restriction digestion (MSRD), we developed a multiplex ddPCR assay for accurate detection of fetal fraction in maternal plasma.MethodsWe initially performed MSRD followed by methylation DNA immunoprecipitation (MeDIP) and NGS on fetal and non-pregnant female tissues to identify fetal-specific DMRs. DMRs with the highest methylation difference between the two tissues were selected for fetal fraction estimation employing MSRD and multiplex ddPCR. Chromosome Y multiplex ddPCR assay (YMM) was used as a reference standard, to develop our fetal fraction estimation model in male pregnancy samples. Additional 123 samples were tested to examine whether the model is sex dependent and/or ploidy dependent.ResultsIn all, 93 DMRs were identified of which seven were selected for fetal fraction estimation. Statistical analysis resulted in the final model which included four DMRs (FFMM). High correlation with YMM-based fetal fractions was observed using 85 male pregnancies (r = 0.86 95% CI: 0.80-0.91). The model was confirmed using an independent set of 53 male pregnancies.ConclusionBy employing a set of well-characterized DMRs, we developed a SNP-, sex- and ploidy-independent methylation-based multiplex ddPCR assay for accurate fetal fraction estimation.

| S-EPMC7005606 | biostudies-literature

Novel RT-ddPCR assays for measuring the levels of subgenomic and genomic SARS-CoV-2 transcripts.

Project description:The replication of SARS-CoV-2 and other coronaviruses depends on transcription of negative-sense RNA intermediates that serve as the templates for the synthesis of positive-sense genomic RNA (gRNA) and multiple different subgenomic mRNAs (sgRNAs) encompassing fragments arising from discontinuous transcription. Recent studies have aimed to characterize the expression of subgenomic SARS-CoV-2 transcripts in order to investigate their clinical significance. Here, we describe a novel panel of reverse transcription droplet digital PCR (RT-ddPCR) assays designed to specifically quantify multiple different subgenomic SARS-CoV-2 transcripts and distinguish them from transcripts that do not arise from discontinuous transcription at each locus. These assays can be applied to samples from SARS-CoV-2 infected patients to better understand the regulation of SARS-CoV-2 transcription and how different sgRNAs may contribute to viral pathogenesis and clinical disease severity.

| S-EPMC8105137 | biostudies-literature

HIV reservoir quantification using cross-subtype multiplex ddPCR.

Project description:A major barrier to conducting HIV cure research in populations with the highest HIV burden is the lack of an accurate assay to quantify the replication-competent reservoir across the dominant global HIV-1 subtypes. Here, we modify a subtype B HIV-1 assay that quantifies both intact and defective proviral DNA, adapting it to accommodate cross-subtype HIV-1 sequence diversity. We show that the cross-subtype assay works on subtypes A, B, C, D, and CRF01_AE and can detect a single copy of intact provirus. In longitudinal blood samples from Kenyan infants infected with subtypes A and D, patterns of intact and total HIV DNA follow the decay of plasma viral load over time during antiretroviral therapy, with intact HIV DNA comprising 7% (range 1%-33%) of the total HIV DNA during HIV RNA suppression. This high-throughput cross-subtype reservoir assay will be useful in HIV cure research in Africa and Asia, where HIV prevalence is highest.

| S-EPMC8786636 | biostudies-literature

MultiplexSSR: A pipeline for developing multiplex SSR-PCR assays from resequencing data.

Project description:Next-generation sequencing has greatly promoted the investigation of single nucleotide polymorphisms, while studies of simple sequence repeats are sharply decreasing. However, simple sequence repeats still present some advantages in conservation genetics. In this study, an end-to-end pipeline referred to as MultiplexSSR was established to develop multiplex PCR assays in batches with highly polymorphic simple sequence repeats for capillary platforms from resequencing data. The distribution of single sequence repeats in the genome, the error profiles of genotypes and allelotypes, and the increase in the allele length range depending on the number of individuals were investigated. A total of 98% of single sequence repeats presented lengths of less than 100 bp. The error rate of the genotyping and allelotyping of dimeric patterns was ten times higher than those for other patterns. The error rate of allelotyping was less than that of genotyping. The allele length range reached approximate saturation with 10 individuals. This pipeline uses allele numbers to select highly polymorphic loci, masks loci with variation, and applies in silico PCR to improve primer specificity. The application of the developed multiplex SSR-PCR assays validated the pipeline's robustness, showing higher polymorphism and stability for the developed simple sequence repeats and a lower cost for genotyping and providing low-depth resequencing data from less than a dozen individuals for the development of markers. This pipeline fills the gap between next-generation sequencing and multiplex SSR-PCR.

| S-EPMC7083706 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data