Data on the femtosecond laser-induced formation of tracks in silver-containing zinc phosphate glass
Ontology highlight
ABSTRACT:
SUBMITTER: Shakhgildyan G
PROVIDER: S-EPMC7786011 | biostudies-literature | 2020 Dec
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:We report on an optimized fabrication protocol for obtaining silver nanoparticles on fused silica substrates via laser photoreduction of a silver salt solution. We find that multiple scans of the laser over the surface leads to a more uniform coverage of densely packed silver nanoparticles of approximately 50 nm diameter on the fused silica surface. Our substrates yield Raman enhancement factors of the order of 1011 of the signal detected from crystal violet. We use a theoretical model based on scanning electron microscope (SEM) images of our substrates to explain our experimental results. We also demonstrate how our technique can be extended to embedding silver nanoparticles in buried microfluidic channels in glass. The in situ laser inscription of silver nanoparticles on a laser machined, sub-surface, microfluidic channel wall within bulk glass paves the way for developing 3D, monolithic, fused silica surface enhance Raman spectroscopy (SERS) microfluidic sensing devices.
| S-EPMC6864074 | biostudies-literature
Project description:Recently, the effect of nanograting formation was demonstrated for binary sodium borate glass with the possibility of data storage with an enhanced level of security. The obvious disadvantage of such glass is poor chemical stability, which limits real applications. In this paper, we show that the introduction of Al2O3 allows preserving the possibility of nanograting formation with a significant increase of chemical resistance and thus to preserve optical memory applications. On the other hand, the possibility of selective etching of laser-written tracks by means of distilled water is revealed, which was not demonstrated for other types of glasses. The dependence of retardance of nanogratings form birefringence on laser writing parameters is established and discussed. Structural features of laser-modified microdomains are studied via Raman spectroscopy which revealed an increase of three-coordinated boron content. A possible mechanism of selective etching is discussed.
| S-EPMC8509244 | biostudies-literature
Project description:Here in, the fs-laser induced thermophoretic writing of microstructures in ad-hoc compositionally designed silicate glasses and their application as infrared optical waveguides is reported. The glass modification mechanism mimics the elemental thermal diffusion occurring in basaltic liquids at the Earth's mantle, but in a much shorter time scale (108 times faster) and over a well-defined micrometric volume. The precise addition of BaO, Na2O and K2O to the silicate glass enables the creation of positive refractive index contrast upon fs-laser irradiation. The influence of the focal volume and the induced temperature gradient is thoroughly analyzed, leading to a variety of structures with refractive index contrasts as high as 2.5 × 10-2. Two independent methods, namely near field measurements and electronic polarizability analysis, confirm the magnitude of the refractive index on the modified regions. Additionally, the functionality of the microstructures as waveguides is further optimized by lowering their propagation losses, enabling their implementation in a wide range of photonic devices.
| S-EPMC8052338 | biostudies-literature
Project description:We report on direct femtosecond laser writing in zinc barium gallo-germanate glasses. A combination of spectroscopic techniques allows to progress in the understanding of the mechanisms taking place depending on the energy. In the first regime (type I, isotropic local index change) up to 0.5 µJ, the main occurrence is the generation of charge traps inspected by luminescence, together with separation of charges detected by polarized second harmonic generation measurements. At higher pulse energies notably at the threshold corresponding to 0.8 µJ or in the second regime (type II modifications corresponding to nanograting formation energy domain), the main occurrence is a chemical change and re-organization of the network evidenced by the appearance of molecular O2 seen in the Raman spectra. In addition, the polarization dependence of the second harmonic generation in type II indicates that the organization of nanogratings may be perturbed by the laser-imprinted electric field.
| S-EPMC10329654 | biostudies-literature
Project description:Biocompatible antimicrobial coatings may enhance the function of many orthopedic implants by combating infection. Hydroxyapatite is a choice mineral for such a coating as it is native to bone and silver would be a possible antimicrobial agent as it is also commonly used in biomedical applications. The aim of the research is to develop a silver-containing calcium phosphate (Ag/Ca-P) coating via electrochemical deposition on titanium substrates as this allows for controlled coating buildup on complex shapes and porous surfaces. Two different deposition approaches are explored: one-step Ag/Ca-P(1) deposition coatings, containing silver ions as microsized silver phosphate particles embedded in the Ca-P matrix; and via a two-step method (Ag/Ca-P(2)) where silver is deposited as metallic silver nanoparticle on the Ca-P coating. The Ag/Ca-P(1) coating displays a bacterial reduction of 76.1 ± 8.3% via Ag-ion leaching. The Ag/Ca-P(2) coating displays a bacterial reduction of 83.7 ± 4.5% via contact killing. Interestingly, by preincubation in phosphate-buffered saline solution, bacterial reduction improves to 97.6 ± 2.7 and 99.7 ± 0.4% for Ag/Ca-P(1) and Ag/Ca-P(2) coatings, respectively, due to leaching of formed AgClx(x-1)- species. The biocompatibility evaluation indicates that the Ag/Ca-P(1) coating is cytotoxic towards osteoblasts while the Ag/Ca-P(2) coating shows excellent compatibility. The electrochemical deposition of highly bactericidal coatings with excellent biocompatibility will enable us to coat future bone implants even with complex or porous structures.
| S-EPMC7252902 | biostudies-literature
Project description:Zn-containing dense monodispersed bioactive glass nanoparticles (Zn-BAGNPs) have been developed to deliver therapeutic inorganic trace elements, including Si, Ca, Sr, and Zn, to the cells through the degradation process, as delivery carriers for stimulating bone regeneration because of their capacity to induce osteogenic differentiation. The sol-gel-derived dense silica nanoparticles (SiO2-NPs) were first synthesized using the modified Stöber method, prior to incorporating therapeutic cations through the heat treatment process. The successfully synthesized monodispersed Zn-BAGNPs (diameter of 130 ± 20 nm) were homogeneous in size with spherical morphology. Ca, Sr and Zn were incorporated through the two-step post-functionalization process, with the nominal ZnO ratio between 0 and 2 (0, 0.5, 1.0, 1.5 and 2.0). Zn-BAGNPs have the capacity for continuous degradation and simultaneous ion release in SBF and PBS solutions due to their amorphous structure. Zn-BAGNPs have no in vitro cytotoxicity on the murine pre-osteoblast cell (MC3T3-E1) and periodontal ligament stem cells (PDLSCs), up to a concentration of 250 µg/mL. Zn-BAGNPs also stimulated osteogenic differentiation on PDLSCs treated with particles, after 2 and 3 weeks in culture. Zn-BAGNPs were not toxic to the cells and have the potential to stimulate osteogenic differentiation on PDLSCs. Therefore, Zn-BAGNPs are potential vehicles for therapeutic cation delivery for applications in bone and dental regenerations.
| S-EPMC9143105 | biostudies-literature
Project description:In the paper, we report on the development of a synthesis and melting method of phosphate glasses designed for active microstructured fiber manufacturing. Non-doped glass synthesized in a P₂O₅-Al₂O₃-BaO-ZnO-MgO-Na₂O oxide system served as the matrix material; meanwhile, the glass was doped with 6 mol% (18 wt%) of Yb₂O₃, as fiber core. The glasses were well-fitted in relation to optical (refractive index) and thermal proprieties (thermal expansion coefficient, rheology). The fiber with the Yb3+-doped core, with a wide internal photonic microstructure for a laser pump, as well as with a high relative hole size in the photonic outer air-cladding, was produced. The laser built on the basis of this fiber enabled achieving 8.07 W of output power with 20.5% slope efficiency against the launched pump power, in single-mode operation M² = 1.59, from a 53 cm-long cavity.
| S-EPMC5455909 | biostudies-other
Project description:Reduced graphene oxide (rGO) functionalized with silver nanoparticles (Ag NPs) is prepared using a femtosecond laser ablation in liquids method. By ablating the mixed aqueous solutions of silver nitrate and graphene oxide (GO) using femtosecond laser pulses, Ag ions and GO are simultaneously reduced and well-dispersed Ag NPs supported on rGO are obtained. The effect of laser power, irritation time and Ag ion concentration on the optical property and morphology of the products are systematically studied. The nonlinear optical responses of the functionalized graphene are studied using a nanosecond Z-scan technique. The rGO hybrid shows an enhanced nonlinear absorption (NLA) effect compared with GO and rGO, and thus exhibits an excellent optical limiting (OL) property with very low activating threshold, which is estimated to be about 0.38 J cm-2. The enhanced NLA effect in rGO hybrids makes it possible to fabricate solid-state optical limiter, improving the practicality of graphene materials in the OL area.
| S-EPMC6083672 | biostudies-literature
Project description:The favorable combination of high material removal rate and low influence on the material beneath the ultra-short pulsed laser-processed surface are of particular advantage for sample preparation. This is especially true at the micrometer scale or for the pre-preparation for a subsequent focused ion beam milling process. Specific surface features, the laser-induced periodic surface structures, are generated on femtosecond laser-irradiated surfaces in most cases, which pose an issue for surface-sensitive mechanical testing or microstructural investigations. This work strives for an approach to enhance the surface quality of glancing-incident laser-processed surfaces on the model material copper with two distinctly different grain sizes. A new generalized perspective is presented, in which optimized parameter selection serves to counteract the formation of the laser-induced periodic surface structures, enabling, for example, grain orientation mapping directly on femtosecond laser processed surfaces.Supplementary informationThe online version contains supplementary material available at 10.1007/s11837-021-04963-w.
| S-EPMC8666433 | biostudies-literature
Project description:In recent years, the fabrication of multifunctional fibers has expanded for multiple applications that require the transmission of both light and electricity. Fibers featuring these two properties are usually composed either of a single material that supports the different characteristics or of a combination of different materials. In this work, we fabricated (i) novel single-core step-index optical fibers made of electrically conductive AgI-AgPO3-WO3 glass and (ii) novel multimaterial fibers with different designs made of AgI-AgPO3-WO3 glass and optically transparent polycarbonate and poly (methyl methacrylate) polymers. The multifunctional fibers produced show light transmission over a wide range of wavelengths from 500 to 1000 nm for the single-core fibers and from 400 to 1000 nm for the multimaterial fibers. Furthermore, these fibers showed excellent electrical conductivity with values ranging between 10-3 and 10-1 S·cm-1 at room temperature within the range of AC frequencies from 1 Hz to 1 MHz. Multimodal taper-tipped fibre microprobes were then fabricated and were characterized. This advanced design could provide promising tools for in vivo electrophysiological experiments that require light delivery through an optical core in addition to neuronal activity recording.
| S-EPMC5335562 | biostudies-literature