Dataset Information

Natural Building Materials for Interior Fitting and Refurbishment-What about Indoor Emissions?

ABSTRACT: Indoor air quality can be adversely affected by emissions from building materials, consequently having a negative impact on human health and well-being. In this study, more than 30 natural building materials (earth dry boards and plasters, bio-based insulation materials, and boards made of wood, flax, reed, straw, etc.) used for interior works were investigated as to their emissions of (semi-)volatile organic compounds ((S)VOC), formaldehyde, and radon. The study focused on the emissions from complete wall build-ups as they can be used for internal partition walls and the internal insulation of external walls. Test chambers were designed, allowing the compounds to release only from the surface of the material facing indoors under testing parameters that were chosen to simulate model room conditions. The emission test results were evaluated using the AgBB evaluation scheme, a procedure for the health-related evaluation of construction products and currently applied for the approval of specific groups of building materials in Germany. Seventeen out of 19 sample build-ups tested in this study would have passed this scheme since they generally proved to be low-emitting and although the combined emissions of multiple materials were tested, 50% of the measurements could be terminated before half of the total testing time.

SUBMITTER: Richter M

PROVIDER: S-EPMC7796468 | biostudies-literature | 2021 Jan

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Natural Building Materials for Interior Fitting and Refurbishment-What about Indoor Emissions?

Richter Matthias M Horn Wolfgang W Juritsch Elevtheria E Klinge Andrea A Radeljic Leon L Jann Oliver O

Materials (Basel, Switzerland) 20210105 1

Indoor air quality can be adversely affected by emissions from building materials, consequently having a negative impact on human health and well-being. In this study, more than 30 natural building materials (earth dry boards and plasters, bio-based insulation materials, and boards made of wood, flax, reed, straw, etc.) used for interior works were investigated as to their emissions of (semi-)volatile organic compounds ((S)VOC), formaldehyde, and radon. The study focused on the emissions from co ...[more]

PMID: 33466502

Similar Datasets

Project description:This paper proposes a novel and innovative methodology to assess the degree of Circularity in one of the most resource-consuming and impactful economic activities: the building construction and/or renovation works. The proposed approach measures the ratio of circular flows in three aspects: energy, water and materials consumption; and combines them with the measure of social added value and economic value of the entire activity along its life cycle, regardless of being a new building construction or a major renovation work. The whole methodology has been developed under a life cycle perspective, incorporating into the analysis all material flows and social, environmental and economic impacts from cradle to grave, i.e., from resource acquisition to end of life treatment processes or disposal. The proposed Key Performance Indicators (KPIs) measure different and non-directly related parameters (energy, materials, social impact…) and they are both quantitative and qualitative metrics. Hence, the proposed methodology performs the indicators calculation procedure independently. The methodology has been tested with a conventional energy renovation process consisting of an installation of an External Thermal Insulation Composite System (ETICS) - one of the most prevailing façade energy retrofitting alternatives - combined with a rooftop solar PV system. In this way, a calculation example is shown and some lessons can be extracted regarding the degree circularity of current building construction and refurbishment practices. Results show that current building envelope solutions - even including an efficient rooftop PV system - are far from being considered circular: whereas a significant 51% of Energy Circularity is achieved, only a 29% and a 21% degree of Circularity is observed for the materials and social aspects, also with high payback periods - above 20 years - on the economic side. The methodology also succeeds in showing the potential for improvement and its location along the building life cycle. It is also shown that buildings behave significantly different in each of the addressed CE aspects: materials, energy and water use, social added value and life cycle cost; showing also different potential of improvement.

Project description:It is now well established that biological pollution is a major cause of the degradation of indoor air quality. It has been shown that microbial communities from the outdoors may significantly impact the communities detected indoors. One can reasonably assume that the fungal contamination of the surfaces of building materials and their release into indoor air may also significantly impact indoor air quality. Fungi are well known as common contaminants of the indoor environment with the ability to grow on many types of building materials and to subsequently release biological particles into the indoor air. The aerosolization of allergenic compounds or mycotoxins borne by fungal particles or vehiculated by dust may have a direct impact on the occupant's health. However, to date, very few studies have investigated such an impact. The present paper reviewed the available data on indoor fungal contamination in different types of buildings with the aim of highlighting the direct connections between the growth on indoor building materials and the degradation of indoor air quality through the aerosolization of mycotoxins. Some studies showed that average airborne fungal spore concentrations were higher in buildings where mould was a contaminant than in normal buildings and that there was a strong association between fungal contamination and health problems for occupants. In addition, the most frequent fungal species on surfaces are also those most commonly identified in indoor air, regardless the geographical location in Europe or the USA. Some fungal species contaminating the indoors may be dangerous for human health as they produce mycotoxins. These contaminants, when aerosolized with fungal particles, can be inhaled and may endanger human health. However, it appears that more work is needed to characterize the direct impact of surface contamination on the airborne fungal particle concentration. In addition, fungal species growing in buildings and their known mycotoxins are different from those contaminating foods. This is why further in situ studies to identify fungal contaminants at the species level and to quantify their average concentration on both surfaces and in the air are needed to be better predict health risks due to mycotoxin aerosolization.

Dataset Information

Natural Building Materials for Interior Fitting and Refurbishment-What about Indoor Emissions?

Publications

Natural Building Materials for Interior Fitting and Refurbishment-What about Indoor Emissions?

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets