Enhancing the local air quality benefits of roadside green infrastructure using low-cost, impermeable, solid structures (LISS).
Ontology highlight
ABSTRACT:
SUBMITTER: Hashad K
PROVIDER: S-EPMC7799493 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:Roadside vegetation has been shown to impact downwind, near-road air quality, with some studies identifying reductions in air pollution concentrations and others indicating increases in pollutant levels when vegetation is present. These widely contradictory results have resulted in confusion regarding the capability of vegetative barriers to mitigate near-road air pollution, which numerous studies have associated with significant adverse human health effects. Roadside vegetation studies have investigated the impact of many different types and conditions of vegetation barriers and urban forests, including preserved, existing vegetation stands usually consisting of mixtures of trees and shrubs or plantings of individual trees. A study was conducted along a highway with differing vegetation characteristics to identify if and how the changing characteristics affected downwind air quality. The results indicated that roadside vegetation needed to be of sufficient height, thickness, and coverage to achieve downwind air pollutant reductions. A vegetation stand which was highly porous and contained large gaps within the stand structure had increased downwind pollutant concentrations. These field study results were consistent with other studies that the roadside vegetation could lead to reductions in average, downwind pollutant concentrations by as much as 50% when this vegetation was thick with no gaps or openings. However, the presence of highly porous vegetation with gaps resulted in similar or sometimes higher concentrations than measured in a clearing with no vegetation. The combination of air quality and meteorological measurements indicated that the vegetation affects downwind pollutant concentrations through attenuation of meteorological and vehicle-induced turbulence as air passes through the vegetation, enhanced mixing as portions of the traffic pollution plume are blocked and forced over the vegetation, and through particulate deposition onto leaf and branch surfaces. Computational fluid dynamic modeling highlighted that density of the vegetation barrier affects pollutant levels, with a leaf area density of 3.0 m2 m-3 or higher needed to ensure downwind pollutant reductions for airborne particulate matter. These results show that roadside bushes and trees can be preserved or planted along highways and other localized pollution sources to mitigate air quality and human health impacts near the source if the planting adheres to important characteristics of height, thickness, and density with full coverage from the ground to the top of the canopy. The results also highlight the importance of planting denser vegetation and maintaining the integrity and structure of these vegetation barriers to achieve pollution reductions and not contribute to unintended increases in downwind air pollutant concentrations.
| S-EPMC7339705 | biostudies-literature
Project description:Green infrastructure (GI) in urban areas may be adopted as a passive control system to reduce air pollutant concentrations. However, current dispersion models offer limited modelling options to evaluate its impact on ambient pollutant concentrations. The scope of this review revolves around the following question: how can GI be considered in readily available dispersion models to allow evaluation of its impacts on pollutant concentrations and health risk assessment? We examined the published literature on the parameterisation of deposition velocities and datasets for both particulate matter and gaseous pollutants that are required for deposition schemes. We evaluated the limitations of different air pollution dispersion models at two spatial scales - microscale (i.e. 10-500?m) and macroscale (i.e. 5-100?km) - in considering the effects of GI on air pollutant concentrations and exposure alteration. We conclude that the deposition schemes that represent GI impacts in detail are complex, resource-intensive, and involve an abundant volume of input data. An appropriate handling of GI characteristics (such as aerodynamic effect, deposition of air pollutants and surface roughness) in dispersion models is necessary for understanding the mechanism of air pollutant concentrations simulation in presence of GI at different spatial scales. The impacts of GI on air pollutant concentrations and health risk assessment (e.g., mortality, morbidity) are partly explored. The i-Tree tool with the BenMap model has been used to estimate the health outcomes of annually-averaged air pollutant removed by deposition over GI canopies at the macroscale. However, studies relating air pollution health risk assessments due to GI-related changes in short-term exposure, via pollutant concentrations redistribution at the microscale and enhanced atmospheric pollutant dilution by increased surface roughness at the macroscale, along with deposition, are rare. Suitable treatments of all physical and chemical processes in coupled dispersion-deposition models and assessments against real-world scenarios are vital for health risk assessments.
| S-EPMC7236027 | biostudies-literature
Project description:This study analyzed how the variations of plant area index (PAI) and weather conditions alter the influence of urban green infrastructure (UGI) on microclimate. To observe how diverse UGIs affect the ambient microclimate through the seasons, microclimatic data were measured during the growing season at five sites in a local urban area in The Netherlands. Site A was located in an open space; sites B, C, and D were covered by different types and configurations of green infrastructure (grove, a single deciduous tree, and street trees, respectively); and site E was adjacent to buildings to study the effects of their façades on microclimate. Hemispherical photography and globe thermometers were used to quantify PAI and thermal comfort at both shaded and unshaded locations. The results showed that groves with high tree density (site B) have the strongest effect on microclimate conditions. Monthly variations in the differences of mean radiant temperature (∆Tmrt) between shaded and unshaded areas followed the same pattern as the PAI. Linear regression showed a significant positive correlation between PAI and ∆Tmrt. The difference of daily average air temperature (∆T a ) between shaded and unshaded areas was also positively correlated to PAI, but with a slope coefficient below the measurement accuracy (±0.5 °C). This study showed that weather conditions can significantly impact the effectiveness of UGI in regulating microclimate. The results of this study can support the development of appropriate UGI measures to enhance thermal comfort in urban areas.
| S-EPMC4636989 | biostudies-literature
Project description:Green infrastructure (GI) implementation can benefit an urban environment by reducing the impacts of urban stormwater on aquatic ecosystems and human health. However, few studies have systematically analyzed the biophysical effects on regional meteorology and air quality that are triggered by changes in the urban vegetative coverage. In this study we use a state-of-the-art high-resolution air quality model to simulate the effects of a hypothetically feasible vegetation-focused GI implementation scenario in Kansas City, MO/KS on regional meteorology and air quality. Full year simulations are conducted for both the base case and GI land use scenarios using two different land surface models (LSMs) schemes inside the meteorological model. While the magnitudes of the changes in air quality due to the GI implementation differ using the two LSMs, the model outputs consistently showed increases in summertime PM2.5 (1.1 μg m-3, approximately 10% increase using NOAH LSM), which occurred mostly during the night and arose from the primary components, due to the cooler surface temperatures and the decreased planetary boundary layer height (PBLH). Both the maximum daily 8-hour average ozone and 1 h daily maximum O3 during summertime, decreased over the downtown areas (maximum decreases of 0.9 and 1.4 ppbv respectively). The largest ozone decreases were simulated to happen during the night, mainly caused by the titration effect of increased NOx concentration from the lower PBLH. These results highlight the region-specific non-linear process feedback from GI on regional air quality, and further demonstrate the need for comprehensive coupled meteorological-air quality modeling systems and necessity of accurate land surface model for studying these impacts.
| S-EPMC7802588 | biostudies-literature
Project description:Green coffee bean extract (GCBE) provides diversified health benefits. However, its reported low bioavailability impeded its utilization in various applications. In this study, GCBE-loaded solid lipid nanoparticles (SLNs) were prepared to improve the bioavailability through enhanced intestinal absorption of GCBE. During the preparation of promising GCBE-loaded SLNs, the lipid concentration, surfactant concentration, and co-surfactant amount are crucial that were optimized using the Box-Behnken design, while particle size, polydispersity index (PDI), ζ-potential, entrapment efficiency, and cumulative drug release were the measured responses. GCBE-SLNs were successfully developed by a high shear homogenization technique using geleol as a solid lipid, tween 80 as a surfactant, and propylene glycol as Co-SAA. The optimized SLNs contained 5.8% geleol, 5.9% tween 80, and 80.4 mg PG resulting in a small particle size of 235.7 ± 12.5 nm, reasonably acceptable PDI of 0.417 ± 0.023, and ζ-potential of -15 ± 0.14 mV, with a high entrapment efficiency of 58.3 ± 0.85% and cumulative release of 7575 ± 0.78%. Furthermore, the performance of the optimized GCBE-SLN was evaluated using an ex vivo everted sac model where the intestinal permeation of GCBE was improved due to nanoencapsulation using SLN. Consequently, the results enlightened the auspicious potential of exploiting oral GCBE-SLNs for boosting intestinal absorption of chlorogenic acid.
| S-EPMC10268626 | biostudies-literature
Project description:Resilient planning demands not only resilient actions, but also resilient implementation, which promotes adaptive capacity for the attainment of the planned objectives. This requires, in the case of multi-level infrastructure systems, the simultaneous pursuit of bottom-up infrastructure planning for the promotion of adaptive capacity, and of top-down approaches for the achievement of global objectives and the reduction of structural vulnerabilities and imbalances. Though several authors have pointed out the need to balance bottom-up flexibility with top-down hierarchical control for better plan implementation, very few methods have yet been developed with this aim, least of all with a multi-objective perspective. This work addressed this lack by including, for the first time, the mitigation of urban vulnerability, the improvement of road network condition, and the minimization of the economic cost as objectives in a resilient planning process in which both actions and their implementation are planned for a controlled, sustainable development. Building on Urban planning support system (UPSS), a previously developed planning tool, the improved planning support system affords a planning alternative over the Spanish road network, with the best multi-objective balance between optimization, risk, and opportunity. The planning process then formalizes local adaptive capacity as the capacity to vary the selected planning alternative within certain limits, and global risk control as the duties that should be achieved in exchange. Finally, by means of multi-objective optimization, the method reveals the multi-objective trade-offs between local opportunity, global risk, and rights and duties at local scale, thus providing deeper understanding for better informed decision-making.
| S-EPMC7038161 | biostudies-literature
Project description:While there is substantial literature about the socio-cultural characteristics and values associated with recreational and commercial fisheries in the U.S., studies directed at those who 'fish for food'-those who depend on consuming their catch to various degrees-are relatively sparse. Using qualitative data collected through 80 semi-structured interviews with fishers in the summer and fall of 2018 in Carteret County, North Carolina, this study aims to better understand the group of recreational fishers who consume their catch by describing social and cultural dimensions and values associated with fishing for food, examining the role of infrastructure in facilitating access to benefits associated with this activity, and considering how knowledge of existing licensing regulations surrounding subsistence license waivers affect this fishing community. Interviews conducted at free public fishing structures in the region revealed that fishers derive a variety of values and benefits from fishing at these sites, including access to recreation, nutrition, a social community, and mental health benefits, which were found to be negatively impacted by Hurricane Florence in September 2018. We also found an informal economy of sharing catch on- and off-site that extends the reach and benefits facilitated by public infrastructure to people beyond those using it directly. Overall, we call for conceptualizations of 'fishing for food' that include aspects that go beyond traditional definitions of 'subsistence' or 'recreational' fishing such as food security, access, and less obvious social and cultural motivations behind the activity. These findings are a compelling rationalization for the creation and maintenance of formal and informal fishing places locally and, by extension, in other coastal areas, given the array of benefits provided by access to these types of locations.
| S-EPMC8049240 | biostudies-literature
Project description:The importance of natural ecosystem processes is often overlooked in urban areas. Green Infrastructure (GI) features have been constructed in urban areas as elements to capture and treat excess urban runoff while providing a range of ancillary benefits, e.g., ecosystem processes mediated by microorganisms that improve air and water quality, in addition to the associations with plant and tree rhizospheres. The objective of this study was to characterize the bacterial community and diversity in engineered soils (Technosols) of five types of GI in New York City; vegetated swales, right of way bioswales (ROWB; including street-side infiltration systems and enhanced tree pits), and an urban forest. The design of ROWB GI features directly connects with the road to manage street runoff, which can increase the Technosol saturation and exposure to urban contaminants washed from the street and carried into the GI feature. This GI design specifically accommodates dramatic pulses of water that influence the bacterial community composition and diversity through the selective pressure of contaminants or by disturbance. The ROWB had the highest biodiversity, but no significant correlation with levels of soil organic matter and microbially-mediated biogeochemical functions. Another important biogeochemical parameter for soil bacterial communities is pH, which influenced the bacterial community composition, consistent with studies in non-urban soils. Bacterial community composition in GI features showed signs of anthropogenic disturbance, including exposure to animal feces and chemical contaminants, such as petroleum products. Results suggest the overall design and management of GI features with a channeled connection with street runoff, such as ROWB, have a comprehensive effect on soil parameters (particularly organic matter) and the bacterial community. One key consideration for future assessments of GI microbial community would be to determine the source of organic matter and elucidate the relationship between vegetation, Technosol, and bacteria in the designed GI features.
| S-EPMC6531853 | biostudies-literature
Project description:Bioinspired superhydrophobic substrates have been used in many scientific and technological areas. These substrates can trap atmosphere-linked air pockets at the solid-liquid interface, offering an opportunity to address the oxygen-deficit problem in many reaction systems. Herein, we addressed the oxygen-deficit problem in metal oxide electrochemical deposition by using a triphase electrode possessing an air-liquid-solid joint interface. Oxygen in the interface is directly available from the air phase for sufficient OH- production via oxygen cathodic reaction, thereby offering us a green approach to fabricate two-dimensional mesoporous ZnO nanoarrays over a wide range of current densities. Further, because metal oxides are deposited at the triphase interface, sufficient O2, a natural electron scavenger required in photocatalytic reaction to suppress the recombination of photogenerated electron-hole pairs, can be directly supplied, and we demonstrated their enhanced photocatalytic reaction kinetics in water remediation. The present work highlights a powerful interface-engineering strategy for fabricating metal oxides with unprecedented photocatalytic ability.
| S-EPMC6648803 | biostudies-literature