Browse
Submit Data
Databases
API
Help

Dataset Information

32 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Double transition metal MXene (Ti_xTa_4-xC₃) 2D materials as anodes for Li-ion batteries.

ABSTRACT: A bi-metallic titanium-tantalum carbide MXene, Ti_xTa_(4-x)C₃ is successfully prepared via etching of Al atoms from parent Ti_xTa_(4-x)AlC₃ MAX phase for the first time. X-ray diffractometer and Raman spectroscopic analysis proved the crystalline phase evolution from the MAX phase to the lamellar MXene arrangements. Also, the X-ray photoelectron spectroscopy (XPS) study confirmed that the synthesized MXene is free from Al after hydro fluoric acid (HF) etching process as well as partial oxidation of Ti and Ta. Moreover, the FE-SEM and TEM characterizations demonstrate the exfoliation process tailored by the Ti_xTa_(4-x)C₃ MXene after the Al atoms from its corresponding MAX Ti_xTa_(4-x)AlC₃ phase, promoting its structural delamination with an expanded interlayer d-spacing, which can allow an effective reversible Li-ion storage. The lamellar Ti_xTa_(4-x)C₃ MXene demonstrated a reversible specific discharge capacity of 459 mAhg^-1 at an applied C-rate of 0.5 °C with a capacity retention of 97% over 200 cycles. An excellent electrochemical redox performance is attributed to the formation of a stable, promising bi-metallic MXene material, which stores Li-ions on the surface of its layers. Furthermore, the Ti_xTa_(4-x)C₃ MXene anode demonstrate a high rate capability as a result of its good electron and Li-ion transport, suggesting that it is a promising candidate as Li-ion anode material.

SUBMITTER: Syamsai R

PROVIDER: S-EPMC7804453 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Surface-Engineered Li4Ti5O12 Nanostructures for High-Power Li-Ion Batteries.

Project description:Materials with high-power charge-discharge capabilities are of interest to overcome the power limitations of conventional Li-ion batteries. In this study, a unique solvothermal synthesis of Li4Ti5O12 nanoparticles is proposed by using an off-stoichiometric precursor ratio. A Li-deficient off-stoichiometry leads to the coexistence of phase-separated crystalline nanoparticles of Li4Ti5O12 and TiO2 exhibiting reasonable high-rate performances. However, after the solvothermal process, an extended aging of the hydrolyzed solution leads to the formation of a Li4Ti5O12 nanoplate-like structure with a self-assembled disordered surface layer without crystalline TiO2. The Li4Ti5O12 nanoplates with the disordered surface layer deliver ultrahigh-rate performances for both charging and discharging in the range of 50-300C and reversible capacities of 156 and 113 mAh g-1 at these two rates, respectively. Furthermore, the electrode exhibits an ultrahigh-charging-rate capability up to 1200C (60 mAh g-1; discharge limited to 100C). Unlike previously reported high-rate half cells, we demonstrate a high-power Li-ion battery by coupling Li4Ti5O12 with a high-rate LiMn2O4 cathode. The full cell exhibits ultrafast charging/discharging for 140 and 12 s while retaining 97 and 66% of the anode theoretical capacity, respectively. Room- (25 °C), low- (- 10 °C), and high- (55 °C) temperature cycling data show the wide temperature operation range of the cell at a high rate of 100C.

| S-EPMC7770703 | biostudies-literature

Perspectives on Iron Oxide-Based Materials with Carbon as Anodes for Li- and K-Ion Batteries.

Project description:The necessity for large scale and sustainable energy storage systems is increasing. Lithium-ion batteries have been extensively utilized over the past decades for a range of applications including electronic devices and electric vehicles due to their distinguishing characteristics. Nevertheless, their massive deployment can be questionable due to use of critical materials as well as limited lithium resources and growing costs of extraction. One of the emerging alternative candidates is potassium-ion battery technology due to potassium's extensive reserves along with its physical and chemical properties similar to lithium. The challenge to develop anode materials with good rate capability, stability and high safety yet remains. Iron oxides are potentially promising anodes for both battery systems due to their high theoretical capacity, low cost and abundant reserves, which aligns with the targets of large-scale application and limited environmental footprint. However, they present relevant limitations such as low electronic conductivity, significant volume changes and inadequate energy efficiency. In this review, we discuss some recent design strategies of iron oxide-based materials for both electrochemical systems and highlight the relationships of their structure performance in nanostructured anodes. Finally, we outline challenges and opportunities for these materials for possible development of KIBs as a complementary technology to LIBs.

| S-EPMC9101958 | biostudies-literature

Alginic acid aquagel as a template and carbon source in the synthesis of Li4Ti5O12/C nanocomposites for application as anodes in Li-ion batteries.

Project description:We report here a simple process for the synthesis of Li4Ti5O12(LTO)/carbon nanocomposites by a one-pot method using an alginic acid aquagel as a template and carbon source, and lithium acetate and TiO2 nanoparticles as precursors to the LTO phase. The carbon content can be tuned by adjusting the relative amount of alginic acid. The obtained materials consist of nanosized primary particles of LTO (30 nm) forming micron-sized aggregates covered by well-dispersed carbon (from 3 to 19 wt%). The homogeneous dispersion of carbon over the particles improves the electrochemical performance of LTO electrodes such as rate capability (>95 mA h g-1 at 40C) and cycling performance (>98% of retention after 500 cycles at 5C), even with only 3% of carbon black additive in the electrode formulation. With a simple and easily up-scalable synthesis, the LTO/carbon nanocomposites of this study are promising candidates as anode materials for practical application in lithium-ion batteries.

| S-EPMC9086269 | biostudies-literature

Exploring the potential of MB2 MBene family as promising anodes for Li-ion batteries.

Project description:In recent years, finding high-performance energy storage materials has become a major challenge for Li-ion batteries. B-based two-dimensional materials have become the focus of attention because of their abundant reserves and non-toxic characteristics. A series of two-dimensional transition metal borides (MBenes) are reported and their electrochemical properties as anode materials for Li-ion batteries are investigated by density functional theory (DFT) calculations. The surface of MB2 possesses medium adsorption strength and diffusion energy barrier for Li atoms, which are conducive to the insertion and extraction of Li-ions during the charge/discharge process of Li-ion batteries. Herein, we explore the potential of MB2 (M = Sc, Y, Ti, Zr, Hf, V, Nb, Ta, Cr, Mo, W, Mn, Fe, Co, Ni, Cu and Zn) as the anode material for LIBs. Excitingly, the Li atom can be stably adsorbed on the surface of MB2 (M = Sc, Ti, V, Nb, Mo, W) monolayers, and the theoretical capacity of the MB2 monolayer is high (521.77-1610.20 mA h g-1). The average open circuit voltage range is within 0.10-1.00 V (vs. Li/Li+). The relationship between the p-band center of the B atom and the adsorption energy of Li on the surface of MB2 is also investigated. Furthermore, it is found that the charge transfer of Li atom and metallic center in the most stable position is strongly related to the corresponding value of diffusion energy barrier. These results confirm that MB2 monolayers are promising 2D anode materials for Li-ion batteries, demonstrating the application prospects of B-based 2D materials.

| S-EPMC10999910 | biostudies-literature

Fabrication of Li4Ti5O12-TiO2 Nanosheets with Structural Defects as High-Rate and Long-Life Anodes for Lithium-Ion Batteries.

Project description:Development of high-power lithium-ion batteries with high safety and durability has become a key challenge for practical applications of large-scale energy storage devices. Accordingly, we report here on a promising strategy to synthesize a high-rate and long-life Li4Ti5O12-TiO2 anode material. The novel material exhibits remarkable rate capability and long-term cycle stability. The specific capacities at 20 and 30 C (1 C = 175 mA g-1) reach 170.3 and 168.2 mA h g-1, respectively. Moreover, a capacity of up to 161.3 mA h g-1 is retained after 1000 cycles at 20 C, and the capacity retention ratio reaches up to 94.2%. The extraordinary rate performance of the Li4Ti5O12-TiO2 composite is attributed to the existence of oxygen vacancies and grain boundaries, significantly enhancing electrical conductivity and lithium insertion/extraction kinetics. Meanwhile, the pseudocapacitive effect is induced owing to the presence of abundant interfaces in the composite, which is beneficial to enhancing specific capacity and rate capability. Additionally, the ultrahigh capacity at low rates, greater than the theoretical value of spinel Li4Ti5O12, may be correlated to the lithium vacancies in 8a sites, increasing the extra docking sites of lithium ions.

| S-EPMC5462757 | biostudies-literature

Bio-Derived, Binderless, Hierarchically Porous Carbon Anodes for Li-ion Batteries.

Project description:Here we explore the electrochemical performance of pyrolyzed skins from the species A. bisporus, also known as the Portobello mushroom, as free-standing, binder-free, and current collector-free Li-ion battery anodes. At temperatures above 900 °C, the biomass-derived carbon nanoribbon-like architectures undergo unique processes to become hierarchically porous. During heat-treatment, the oxygen and heteroatom-rich organics and potassium compounds naturally present in the mushroom skins play a mutual role in creating inner void spaces throughout the resulting carbon nanoribbons, which is a process analogous to KOH-activation of carbon materials seen in literature. The pores formed in the pyrolytic carbon nanoribbons range in size from sub-nanometer to tens of nanometers, making the nanoribbons micro, meso, and macroporous. Detailed studies were conducted on the carbon nanoribbons using SEM and TEM to study morphology, as well as XRD and EDS to study composition. The self-supporting nanoribbon anodes demonstrate significant capacity increase as they undergo additional charge/discharge cycles. After a pyrolysis temperature of 1100 °C, the pristine anodes achieve over 260 mAh/g after 700 cycles and a Coulombic efficiency of 101.1%, without the use of harmful solvents or chemical activation agents.

| S-EPMC4586494 | biostudies-other

Electrostatic Self-assembly of 0D-2D SnO2 Quantum Dots/Ti3C2Tx MXene Hybrids as Anode for Lithium-Ion Batteries.

Project description:MXenes, a new family of two-dimensional (2D) materials with excellent electronic conductivity and hydrophilicity, have shown distinctive advantages as a highly conductive matrix material for lithium-ion battery anodes. Herein, a facile electrostatic self-assembly of SnO2 quantum dots (QDs) on Ti3C2Tx MXene sheets is proposed. The as-prepared SnO2/MXene hybrids have a unique 0D-2D structure, in which the 0D SnO2 QDs (~ 4.7 nm) are uniformly distributed over 2D Ti3C2Tx MXene sheets with controllable loading amount. The SnO2 QDs serve as a high capacity provider and the "spacer" to prevent the MXene sheets from restacking; the highly conductive Ti3C2Tx MXene can not only provide efficient pathways for fast transport of electrons and Li ions, but also buffer the volume change of SnO2 during lithiation/delithiation by confining SnO2 QDs between the MXene nanosheets. Therefore, the 0D-2D SnO2 QDs/MXene hybrids deliver superior lithium storage properties with high capacity (887.4 mAh g-1 at 50 mA g-1), stable cycle performance (659.8 mAh g-1 at 100 mA g-1 after 100 cycles with a capacity retention of 91%) and excellent rate performance (364 mAh g-1 at 3 A g-1), making it a promising anode material for lithium-ion batteries.

| S-EPMC7770891 | biostudies-literature

Doping-induced memory effect in Li-ion batteries: the case of Al-doped Li4Ti5O12.

Project description:In Li-ion batteries (LIBs), a memory effect has been revealed in two-phase electrode materials such as olivine LiFePO4 and anatase TiO2, which complicates the two-phase transition and influences the estimation of the state of charge. Practical electrode materials are usually optimized by the element doping strategy, however, its impact on the memory effect has not been reported yet. Here we firstly present the doping-induced memory effect in LIBs. Pristine Li4Ti5O12 is free from the memory effect, while a distinct memory effect could be induced by Al-doping. After being discharged to a lower cutoff potential, Al-doped Li4Ti5O12 exhibits poorer electrochemical kinetics, delivering a larger overpotential during the charging process. This dependence of the overpotential on the discharging cutoff leads to the memory effect in Al-doped Li4Ti5O12. Our discovery emphasizes the impact of element doping on the memory effect of electrode materials, and thus has implications for battery design.

| S-EPMC5497270 | biostudies-literature

MXene-Derived Defect-Rich TiO2@rGO as High-Rate Anodes for Full Na Ion Batteries and Capacitors.

Project description:Sodium ion batteries and capacitors have demonstrated their potential applications for next-generation low-cost energy storage devices. These devices's rate ability is determined by the fast sodium ion storage behavior in electrode materials. Herein, a defective TiO2@reduced graphene oxide (M-TiO2@rGO) self-supporting foam electrode is constructed via a facile MXene decomposition and graphene oxide self-assembling process. The employment of the MXene parent phase exhibits distinctive advantages, enabling defect engineering, nanoengineering, and fluorine-doped metal oxides. As a result, the M-TiO2@rGO electrode shows a pseudocapacitance-dominated hybrid sodium storage mechanism. The pseudocapacitance-dominated process leads to high capacity, remarkable rate ability, and superior cycling performance. Significantly, an M-TiO2@rGO//Na3V2(PO4)3 sodium full cell and an M-TiO2@rGO//HPAC sodium ion capacitor are fabricated to demonstrate the promising application of M-TiO2@rGO. The sodium ion battery presents a capacity of 177.1 mAh g-1 at 500 mA g-1 and capacity retention of 74% after 200 cycles. The sodium ion capacitor delivers a maximum energy density of 101.2 Wh kg-1 and a maximum power density of 10,103.7 W kg-1. At 1.0 A g-1, it displays an energy retention of 84.7% after 10,000 cycles.

| S-EPMC7770766 | biostudies-literature

High-performance spinel-rich Li1.5MnTiO4+δ ultralong nanofibers as cathode materials for Li-ion batteries.

Project description:Recently, composite materials based on Li-Mn-Ti-O system were developed to target low cost and environmentally benign cathodes for Li-ion batteries. The spinel-layered Li1.5MnTiO4+δ bulk particles showed excellent cycle stability but poor rate performance. To address this drawback, ultralong nanofibers of a Li1.5MnTiO4+δ spinel-layered heterostructure were synthesized by electrospinning. Uniform nanofibers with diameters of about 80 nm were formed of tiny octahedral particles wrapped together into 30 μm long fibers. The Li1.5MnTiO4+δ nanofibers exhibited an improved rate capability compared to both Li1.5MnTiO4+δ nanoparticles and bulk particles. The uniform one-dimensional nanostructure of the composite cathode exhibited enhanced capacities of 235 and 170 mAh g-1 at C/5 and 1 C rates, respectively. Its unique structure provided a large effective contact area for Li+ diffusion, and low charge transfer resistance. Moreover, the layered phase contributed to its capacity in over 3 V region, which increased specific energy (726 Wh kg-1) compared to the bulk particles (534 Wh kg-1).

| S-EPMC5374536 | biostudies-literature