Additive Manufactured Carbon Nanotube/Epoxy Nanocomposites for Heavy-Duty Applications.
Ontology highlight
ABSTRACT:
SUBMITTER: Jiang Q
PROVIDER: S-EPMC7804968 | biostudies-literature | 2021 Jan
REPOSITORIES: biostudies-literature
Publications
Additive Manufactured Carbon Nanotube/Epoxy Nanocomposites for Heavy-Duty Applications.
Jiang Qixiang Q Zhang Haiguang H Rusakov Dmitrii D Yousefi Neptun N Bismarck Alexander A
ACS applied polymer materials 20201208 1
A solid epoxy resin formulation containing 2.5 wt % carbon nanotubes is 3D printed into self-standing parts, which after thermal curing result in CNTs/epoxy nanocomposites with mechanical properties attractive for heavy-duty applications. ...[more]
Similar Datasets
Project description:The strong structural integrity of polymer nanocomposite is influenced in the moist environment; but the fundamental mechanism is unclear, including the basis for the interactions between the absorbed water molecules and the structure, which prevents us from predicting the durability of its applications across multiple scales. In this research, a molecular dynamics model of the epoxy/single-walled carbon nanotube (SWCNT) nanocomposite is constructed to explore the mechanism of the moisture effect, and an analysis of the molecular interactions is provided by focusing on the hydrogen bond (H-bond) network inside the nanocomposite structure. The simulations show that at low moisture concentration, the water molecules affect the molecular interactions by favorably forming the water-nanocomposite H-bonds and the small cluster, while at high concentration the water molecules predominantly form the water-water H-bonds and the large cluster. The water molecules in the epoxy matrix and the epoxy-SWCNT interface disrupt the molecular interactions and deteriorate the mechanical properties. Through identifying the link between the water molecules and the nanocomposite structure and properties, it is shown that the free volume in the nanocomposite is crucial for its structural integrity, which facilitates the moisture accumulation and the distinct material deteriorations. This study provides insights into the moisture-affected structure and properties of the nanocomposite from the nanoscale perspective, which contributes to the understanding of the nanocomposite long-term performance under the moisture effect.
| S-EPMC5666489 | biostudies-literature
Project description:During their synthesis, multi-walled carbon nanotubes can be aligned and impregnated in a polymer matrix to form an electrically conductive and flexible nanocomposite with high backing density. The material exhibits the highest reported electrical conductivity of CNT-epoxy composites (350 S/m). Here, we show how conductive atomic force microscopy can be used to study the electrical transport mechanism in order to explain the enhanced electrical properties of the composite. The high spatial resolution and versatility of the technique allows us to further decouple the two main contributions to the electrical transport: (1) the intrinsic resistance of the tube and (2) the tunneling resistance due to nanoscale gaps occurring between the epoxy-coated tubes along the composite. The results show that the material behaves as a conductive polymer, and the electrical transport is governed by electron tunneling at interconnecting CNT-polymer junctions. We also point out the theoretical formulation of the nanoscale electrical transport between the AFM tip and the sample in order to derive both the composite conductivity and the CNT intrinsic properties. The enhanced electrical properties of the composite are attributed to high degree of alignment, the CNT purity, and the large tube diameter which lead to low junction resistance. By controlling the tube diameter and using other polymers, the nanocomposite electrical conductivity can be improved.
| S-EPMC3511210 | biostudies-literature
Project description:Decades of extensive research have matured the development of carbon nanotubes (CNTs). Still, the properties of macroscale assemblages, such as sheets of carbon nanotubes, are not good enough to satisfy many applications. This paper gives an overview of different approaches to synthesize CNTs and then focuses on the floating catalyst method to form CNT sheets. A method is also described in this paper to modify the properties of macroscale carbon nanotube sheets produced by the floating catalyst method. The CNT sheet is modified to form a carbon nanotube hybrid (CNTH) sheet by incorporating metal, ceramic, or other types of nanoparticles into the high-temperature synthesis process to improve and customize the properties of the traditional nanotube sheet. This paper also discusses manufacturing obstacles and the possible commercial applications of the CNT sheet and CNTH sheet. Manufacturing problems include the difficulty of injecting dry nanoparticles uniformly, increasing the output of the process to reduce cost, and safely handling the hydrogen gas generated in the process. Applications for CNT sheet include air and water filtering, energy storage applications, and compositing CNTH sheets to produce apparel with anti-microbial properties to protect the population from infectious diseases. The paper also provides an outlook towards large scale commercialization of CNT material.
| S-EPMC7656311 | biostudies-literature
Project description:Carbon nanotubes (CNTs) are highly promising for strength reinforcement in polymer nanocomposites, but conflicting interfacial properties have been reported by single nanotube pull-out experiments. Here, we report the interfacial load transfer mechanisms during pull-out of CNTs from PMMA matrices, using massively- parallel molecular dynamics simulations. We show that the pull-out forces associated with non-bonded interactions between CNT and PMMA are generally small, and are weakly-dependent on the embedment length of the nanotube. These pull-out forces do not significantly increase with the presence of Stone Wales or vacancy defects along the nanotube. In contrast, low-density distribution of cross-links along the CNT-PMMA interface increases the pull-out forces by an order of magnitude. At each cross-linked site, mechanical unfolding and pull-out of single or pair polymer chain(s) attached to the individual cross-link bonds result in substantial interfacial strengthening and toughening, while contributing to interfacial slip between CNT and PMMA. Our interfacial shear-slip model shows that the interfacial loads are evenly-distributed among the finite number of cross-link bonds at low cross-link densities or for nanotubes with short embedment lengths. At higher cross-link densities or for nanotubes with longer embedment lengths, a no-slip zone now develops where shear-lag effects become important. Implications of these results, in the context of recent nanotube pull-out experiments, are discussed.
| S-EPMC6127397 | biostudies-literature
Project description:Carbon nanotube/polymer-based composites have led to studies that enable the realization of low-cost, high-sensitivity piezoresistive strain sensors. This study investigated the characteristics of piezoresistive multi-walled carbon nanotube (MWCNT)/epoxy composite strain sensors subjected to tensile and compressive loads in one direction at relatively small amounts of strain. A patterned sensor was designed to overcome the disadvantage of the load direction sensitivity differences in the existing sensors. The dispersion state of the MWCNTs in the epoxy polymer matrix with the proposed dispersion process was verified by scanning electron microscopy. An MWCNT/epoxy patterned strain sensor and a patch-type strain sensor were directly attached to an acrylic cantilever beam on the opposite side of a commercial metallic strain gauge. The proposed patterned sensor had gauge factors of 2.52 in the tension direction and 2.47 in the compression direction. The measured gauge factor difference for the patterned sensor was less than that for the conventional patch-type sensor. Moreover, the free-vibration frequency response characteristics were compared with those of metal strain gauges to verify the proposed patch-type sensor. The designed drive circuit compensated for the disadvantages due to the high drive voltage, and it was confirmed that the proposed sensor had higher sensitivity than the metallic strain gauge. In addition, the hysteresis of the temperature characteristics of the proposed sensor is presented to show its temperature range. It was verified that the patterned sensor developed through various studies could be applied as a strain sensor for structural health monitoring.
| S-EPMC6926730 | biostudies-literature
Project description:In the fifteen years following the discovery of single-walled carbon nanotube (SWCNT) photoluminescence, investigators have made significant progress in their understanding of the phenomenon and towards the development of applications. The intrinsic potential of semiconducting carbon nanotubes - a family of bright, photostable near infrared (NIR) fluorophores (900-2100 nm) with tunable properties, has motivated their use as optical probes and sensors. In this perspective, we highlight the advances made in the synthesis, processing, modification, separation, and metrology of carbon nanotubes in the context of applications of their photoluminescence.
| S-EPMC5568031 | biostudies-literature
Project description:Drug-resistant bacterial infection is a global threat to public health due to the high mobility of the population. Novel therapy methods have been intensively studied for the eradication of antibiotic-resistant bacteria, including photothermal treatment, which has established outstanding bacterial killing efficiencies under laser radiation, and superhydrophobic surfaces have exhibited excellent antifouling properties. However, an effective, scalable, and affordable bactericidal coating for eliminating drug-resistant bacteria is lacking. Herein, a novel graphene coating using one-step laser-induced graphene and simultaneous laser-induced forward transfer is introduced. The graphene coating shows high photothermal conversion and superhydrophobic performance, and these synergistic effects can make the bacteria number decrease with over 99.99% proportions under one sun illumination. The superhydrophobic properties can also reduce 99.87% of bacteria compared to the control sample when the solar energy is not available. This additive and scalable method can quickly coat functional graphene onto various substrates, with bacterial applications in many areas, such as water pipeline robots.
| S-EPMC6957018 | biostudies-literature
Project description:As carbon nanotube (CNT) infused hybrid composites are increasingly identified as next-generation aerospace materials, it is vital to evaluate their long-term structural performance under aging environments. In this work, the durability of hierarchical, aligned CNT grafted aluminoborosilicate microfiber-epoxy composites (CNT composites) are compared against baseline aluminoborosilicate composites (baseline composites), before and after immersion in water at 25 °C (hydro) and 60 °C (hydrothermal), for extended durations (90 d and 180 d). The addition of CNTs is found to reduce water diffusivities by approximately 1.5 times. The mechanical properties (bending strength and modulus) and the damage sensing capabilities (DC conductivity) of CNT composites remain intact regardless of exposure conditions. The baseline composites show significant loss of strength (44 %) after only 15 d of hydrothermal aging. This loss of mechanical strength is attributed to fiber-polymer interfacial debonding caused by accumulation of water at high temperatures. In situ acoustic and DC electrical measurements of hydrothermally aged CNT composites identify extensive stress-relieving micro-cracking and crack deflections that are absent in the aged baseline composites. These observations are supported by SEM images of the failed composite cross-sections that highlight secondary matrix toughening mechanisms in the form of CNT pullouts and fractures which enhance the service life of composites and maintain their properties under accelerated aging environments.
| S-EPMC5695714 | biostudies-literature
Project description:Curing effects were investigated by using the electrical response of a single carbon nanotube yarn (CNTY) embedded in an epoxy resin during the polymerization process. Two epoxy resins of different viscosities and curing temperatures were investigated, varying also the concentration of the curing agent. It is shown that the kinetics of resin curing can be followed by using the electrical response of an individual CNTY embedded in the resin. The electrical resistance of an embedded CNTY increased (~ 9%) after resin curing for an epoxy resin cured at 130 °C with viscosity of ~ 59 cP at the pouring/curing temperature ("Epon 862"), while it decreased (~ -9%) for a different epoxy cured at 60 °C, whose viscosity is about double at the corresponding curing temperature. Lowering the curing temperature from 60 °C to room temperature caused slower and smoother changes of electrical resistance over time and smaller (positive) residual resistance. Increasing the concentration of the curing agent caused a faster curing kinetics and, consequently, more abrupt changes of electrical resistance over time, with negative residual electrical resistance. Therefore, the resin viscosity and curing kinetics play a paramount role in the CNTY wicking, wetting and resin infiltration processes, which ultimately govern the electrical response of the CNTY immersed into epoxy.
| S-EPMC7309011 | biostudies-literature
Project description:This work reports the nanocomposites of graphitic nanofibers (GNFs) and carbon nanotubes (CNTs) as the electrode material for supercapacitors. The hybrid CNTs/GNFs was prepared via a synthesis route that involved catalytic chemical vapor deposition (CVD) method. The structure and morphology of CNTs/GNFs can be precisely controlled by adjusting the flow rates of reactant gases. The nest shape entanglement of CNTs and GNFs which could not only have high conductivity to facilitate ion transmission, but could also increase surface area for more electrolyte ions access. When assembled in a symmetric two-electrode system, the CNTs/GNFs-based supercapacitor showed a very good cycling stability of 96% after 10 000 charge/discharge cycles. Moreover, CNTs/GNFs-based symmetric device can deliver a maximum specific energy of 72.2?Wh?kg-1 at a power density of 686.0?W?kg-1. The high performance of the hybrid performance can be attributed to the wheat like GNFs which provide sufficient accessible sites for charge storage, and the CNTs skeleton which provide channels for charge transport.
| S-EPMC5998012 | biostudies-literature