Dataset Information

Skin dose calculation during radiotherapy of head and neck cancer using deformable image registration of planning and mega-voltage computed tomography scans.

ABSTRACT:

Background and purpose

Head-Neck (HN) patients may experience severe acute skin complications that can cause treatment interruption and increase the risk of late fibrosis. This study assessed a method for accurately monitoring skin dose changes during helical tomotherapy for HN cancer based on deformable image registration of planning computed tomography (CT) and mega-voltage CT (MVCT).

Materials and methods

Planning CTs of nine patients were deformably registered to mid-treatment MVCT (MV15) images resulting in CTdef images. The original plans were recalculated on both CTdef and mid-treatment kilo-voltage CT (CT15) taken as ground truth. Superficial layers (SL) of the body with thicknesses of 2, 3 and 5?mm (SL2, SL3, SL5) were considered as derma surrogates. SL V95%, V97%, V98%, V100%, V102%, V105% and V107% of the prescribed PTV dose were extracted for CT15/CTdef and compared (considering patients with skin dose?>?95%). For comparison, doses were calculated directly on the calibrated MVCT and analyzed in the same way.

Results

Differences between SL2/SL3/SL5 V95%-V107% in CT15/CTdef were very small: for eight of nine patients the difference between the considered SL2 Vd% computed on CTdef and CT15 was less than 1.4?cm³ for all d%. A larger value was found when using MVCT for skin dose calculation (4.8?cm³ for SL2), although CTdef body contour matched CT15 body with accuracy similar to that of MV15.

Conclusions

Deforming the planning CT-to-MVCT was shown to be accurate considering external body contours and skin DVHs. The method was able to accurately identify superficial overdosing.

SUBMITTER: Branchini M

PROVIDER: S-EPMC7807680 | biostudies-literature | 2018 Oct

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Skin dose calculation during radiotherapy of head and neck cancer using deformable image registration of planning and mega-voltage computed tomography scans.

Branchini Marco M Broggi Sara S Dell'Oca Italo I Cattaneo Giovanni Mauro GM Calandrino Riccardo R Di Muzio Nadia Gisella NG Fiorino Claudio C

Physics and imaging in radiation oncology 20181001

<h4>Background and purpose</h4>Head-Neck (HN) patients may experience severe acute skin complications that can cause treatment interruption and increase the risk of late fibrosis. This study assessed a method for accurately monitoring skin dose changes during helical tomotherapy for HN cancer based on deformable image registration of planning computed tomography (CT) and mega-voltage CT (MVCT).<h4>Materials and methods</h4>Planning CTs of nine patients were deformably registered to mid-treatment ...[more]

PMID: 33458416

Similar Datasets

Project description:PurposeThe accuracy of deformable image registration tools can vary widely between imaging modalities and specific implementations of the same algorithms. A biomechanical model-based algorithm initially developed in-house at an academic institution was translated into a commercial radiotherapy treatment planning system and validated for multiple imaging modalities and anatomic sites.MethodsBiomechanical deformable registration (Morfeus) is a geometry-driven algorithm based on the finite element method. Boundary conditions are derived from the model-based segmentation of controlling structures in each image which establishes a point-to-point surface correspondence. For each controlling structure, material properties and fixed or sliding interfaces are assigned. The displacements of internal volumes for controlling structures and other structures implicitly deformed are solved with finite element analysis. Registration was performed for 74 patients with images (mean vector resolution) of thoracic and abdominal 4DCT (2.8 mm) and MR (5.3 mm), liver CT-MR (4.5 mm), and prostate MR (2.6 mm). Accuracy was quantified between deformed and actual target images using distance-to-agreement (DTA) for structure surfaces and the target registration error (TRE) for internal point landmarks.ResultsThe results of the commercial implementation were as follows. The mean DTA was ≤ 1.0 mm for controlling structures and 1.0-3.5 mm for implicitly deformed structures on average. TRE ranged from 2.0 mm on prostate MR to 5.1 mm on lung MR on average, within 0.1 mm or lower than the image voxel sizes. Accuracy was not overly sensitive to changes in the material properties or variability in structure segmentations, as changing these inputs affected DTA and TRE by ≤ 0.8 mm. Maximum DTA > 5 mm occurred for 88% of the structures evaluated although these were within the inherent segmentation uncertainty for 82% of structures. Differences in accuracy between the commercial and in-house research implementations were ≤ 0.5 mm for mean DTA and ≤ 0.7 mm for mean TRE.ConclusionsAccuracy of biomechanical deformable registration evaluated on a large cohort of images in the thorax, abdomen and prostate was similar to the image voxel resolution on average across multiple modalities. Validation of this treatment planning system implementation supports biomechanical deformable registration as a versatile clinical tool to enable accurate target delineation at planning and treatment adaptation.

Project description:Percutaneous pelvic screw placement is challenging due to narrow bone corridors surrounded by vulnerable structures and difficult visual interpretation of complex anatomical shapes in 2D x-ray projection images. To address these challenges, a system for planning, guidance, and quality assurance (QA) is presented, providing functionality analogous to surgical navigation, but based on robust 3D-2D image registration techniques using fluoroscopy images already acquired in routine workflow. Two novel aspects of the system are investigated: automatic planning of pelvic screw trajectories and the ability to account for deformation of surgical devices (K-wire deflection). Atlas-based registration is used to calculate a patient-specific plan of screw trajectories in preoperative CT. 3D-2D registration aligns the patient to CT within the projective geometry of intraoperative fluoroscopy. Deformable known-component registration (dKC-Reg) localizes the surgical device, and the combination of plan and device location is used to provide guidance and QA. A leave-one-out analysis evaluated the accuracy of automatic planning, and a cadaver experiment compared the accuracy of dKC-Reg to rigid approaches (e.g. optical tracking). Surgical plans conformed within the bone cortex by 3-4?mm for the narrowest corridor (superior pubic ramus) and??>5?mm for the widest corridor (tear drop). The dKC-Reg algorithm localized the K-wire tip within 1.1?mm and 1.4° and was consistently more accurate than rigid-body tracking (errors up to 9?mm). The system was shown to automatically compute reliable screw trajectories and accurately localize deformed surgical devices (K-wires). Such capability could improve guidance and QA in orthopaedic surgery, where workflow is impeded by manual planning, conventional tool trackers add complexity and cost, rigid tool assumptions are often inaccurate, and qualitative interpretation of complex anatomy from 2D projections is prone to trial-and-error with extended fluoroscopy time.

Project description:BackgroundSingle-isocenter (SI) noncoplanar volumetric modulated arc therapy (NC-VMAT) has been widely used in stereotactic radiosurgery (SRS) or hypofractionated stereotactic radiotherapy (HSRT) for multiple brain metastases (BMs). However, it is critical to verify patient positioning at a noncoplanar couch angle. This study aimed to compare the noncoplanar setup discrepancies between kilo-voltage/mega-voltage image (kV/MV) orthogonal image pairs with a 2-dimensional/3-dimensional (2D/3D) matching mode and noncoplanar cone-beam computed tomography (NC-CBCT) with a 3D/3D matching mode in SI NC-VMAT HSRT for multiple BMs.MethodsTwenty patients with multiple BMs [2-5] who underwent SI NC-VMAT HSRT were enrolled in this study. Prior to each noncoplanar field delivery, both kV/MV orthogonal image pairs and NC-CBCT were used to determine setup errors. The setup error values reported by NC-CBCT were defined as the gold standard and compared to those reported by kV/MV orthogonal image pairs. The Bland-Altman analysis method was utilized to assess the agreement of the two positioning modalities.ResultsIn total, 104 kV/MV image pairs and NC-CBCT scans were acquired. The mean setup error differences (SEDs; absolute values) between the two positioning systems were 0.17 mm, 0.21 mm, 0.16 mm, 0.22°, 0.18°, and 0.17° in the vertical, longitudinal, lateral, yaw, pitch, and roll directions, respectively. The maximum SEDs regarding translation and rotation occurred in the longitudinal and yaw directions at 0.60 mm and 0.8°, respectively. Bland-Altman analysis showed excellent agreement between the two positioning modalities, and the 95% limits of agreement (LOAs) never exceeded 0.6 mm and 0.6° in the translational and rotational directions, respectively. Only 4.80% of SEDs exceeded the tolerance of 0.5 mm/0.5°.ConclusionsOrthogonal kV/MV image pairs with 2D/3D matching mode could provide comparable accuracy for noncoplanar positioning as NC-CBCT with 3D/3D matching mode.

Dataset Information

Skin dose calculation during radiotherapy of head and neck cancer using deformable image registration of planning and mega-voltage computed tomography scans.

Background and purpose

Materials and methods

Results

Conclusions

Publications

Skin dose calculation during radiotherapy of head and neck cancer using deformable image registration of planning and mega-voltage computed tomography scans.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets