Dataset Information

Standardizing fatigue-resistance testing during electrical stimulation of paralysed human quadriceps muscles, a practical approach.

ABSTRACT:

Background

Rapid onset of muscular fatigue is still one of the main issues of functional electrical stimulation (FES). A promising technique, known as distributed stimulation, aims to activate sub-units of a muscle at a lower stimulation frequency to increase fatigue-resistance. Besides a general agreement on the beneficial effects, the great heterogeneity of evaluation techniques, raises the demand for a standardized method to better reflect the requirements of a practical application.

Methods

This study investigated the fatigue-development of 6 paralysed quadriceps muscles over the course of 180 dynamic contractions, evaluating different electrode-configurations (conventional and distributed stimulation). For a standardized comparison, fatigue-testing was performed at 40% of the peak-torque during a maximal evoked contraction (MEC). Further, we assessed the isometric torque for each electrode-configuration at different knee-extension-angles (70°-170°, 10° steps).

Results

Our results showed no significant difference in the fatigue-index for any of the tested electrode-configurations, compared to conventional-stimulation. We conjecture that the positive effects of distributed stimulation become less pronounced at higher stimulation amplitudes. The isometric torque produced at different knee-extension angles was similar for most electrode-configurations. Maximal torque-production was found at 130°-140° knee-extension-angle, which correlates with the maximal knee-flexion-angles during running.

Conclusion

In most practical applications, FES is intended to initiate dynamic movements. Therefore, it is crucial to assess fatigue-resistance by using dynamic contractions. Reporting the relationship between produced torque and knee-extension-angle can help to observe the stability of a chosen electrode-configuration for a targeted range-of-motion. Additionally, we suggest to perform fatigue testing at higher forces (e.g. 40% of the maximal evoked torque) in pre-trained subjects with SCI to better reflect the practical demands of FES-applications.

SUBMITTER: Schmoll M

PROVIDER: S-EPMC7818559 | biostudies-literature | 2021 Jan

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Standardizing fatigue-resistance testing during electrical stimulation of paralysed human quadriceps muscles, a practical approach.

Schmoll Martin M Le Guillou Ronan R Lobato Borges David D Fattal Charles C Fachin-Martins Emerson E Azevedo Coste Christine C

Journal of neuroengineering and rehabilitation 20210121 1

<h4>Background</h4>Rapid onset of muscular fatigue is still one of the main issues of functional electrical stimulation (FES). A promising technique, known as distributed stimulation, aims to activate sub-units of a muscle at a lower stimulation frequency to increase fatigue-resistance. Besides a general agreement on the beneficial effects, the great heterogeneity of evaluation techniques, raises the demand for a standardized method to better reflect the requirements of a practical application.< ...[more]

PMID: 33478556

Similar Datasets

Project description:Neuromuscular electrical stimulation (NMES) has been used to increase muscle strength and physical function. However, NMES induces rapid fatigue, limiting its application. To date, the effect of quadriceps femoris (QF) muscle length by knee and hip joint manipulation on NMES-induced contraction fatigability is not clear. We aimed to quantify the effects of different muscle lengths on NMES-induced contraction fatigability, fatigue index, and electromyographic (EMG) activity for QF muscle. QF maximum evoked contraction (QMEC) was applied in a 26 min protocol (10 s on; 120 s off; 12 contractions) in 20 healthy participants (24.0 ± 4.6 years old), over 4 sessions on different days to test different conditions. The tested conditions were as follows: supine with knee flexion of 60° (SUP60), seated with knee flexion of 60° (SIT60), supine with knee flexion of 20° (SUP20), and seated with knee flexion of 20° (SIT20). Contraction fatigability (torque decline assessed by maximal voluntary contraction [MVC] and during NMES), fatigue index (percentage reduction in MVC), and EMG activity (root mean square [RMS] and median frequency) of the superficial QF' constituents were assessed. After NMES, all positions except SUP20 had an absolute reduction in MVC (p < .001). Fatigue index was greater in SIT20 than in SIT60 (p < .001) and SUP20 (p = .01). There was significant torque reduction across the 12 QMEC in SUP60 and SIT60, up to 10.5% (p < .001-.005) and 9.49% (p < .001-.033), respectively. There was no torque reduction during NMES in SUP20 and SIT20. Fatigue was accompanied by an increase in RMS (p = .032) and a decrease in median frequency for SUP60 (p < .001). Median frequency increased only in the SUP20 condition (p = .021). We concluded that QF NMES-induced contraction fatigability is greater when the knee is flexed at 60° compared to 20°. In addition, a supine position promotes earlier fatigue for a 60° knee flexion, but it delays fatigue onset for a 20° knee flexion compared to the seated position. These results provide a rationale for lower limb positioning during NMES, which depends on training objectives, e.g., strengthening or task-specific functionality training.

Project description:BackgroundNeuromuscular electrical stimulation (NMES) may prevent muscle atrophy, accelerate rehabilitation and enhance blood circulation. Yet, one major drawback is that patient compliance is impeded by the discomfort experienced. It is well-known that the size and placement of electrodes affect the comfort and effect during high-intensity NMES. However, during low-intensity NMES the effects of electrode size/placement are mostly unknown. Therefore, the purpose of this study was to investigate how electrode size and pragmatic placement affect comfort and effect of low-intensity NMES in the thigh and gluteal muscles.MethodsOn 15 healthy participants, NMES-intensity (mA) was increased until visible muscle contraction, applied with three electrode sizes (2 × 2 cm, 5 × 5 cm, 5 × 9 cm), in three different configurations on quadriceps and hamstrings (short-transverse (ST), long-transverse (LT), longitudinal (L)) and two configurations on gluteus maximus (short-longitudinal (SL) and long-longitudinal (LL)). Current-density (mA/cm2) required for contraction was calculated for each electrode size. Comfort was assessed with a numerical rating scale (NRS, 0-10). Significance was set to p < 0.05 and values were expressed as median (inter-quartile range).ResultsOn quadriceps the LT-placement exhibited significantly better comfort and lower current intensity than the ST- and L-placements. On hamstrings the L-placement resulted in the best comfort together with the lowest intensity. On gluteus maximus the LL-placement demonstrated better comfort and required less intensity than SL-placement. On all muscles, the 5 × 5 cm and 5 × 9 cm electrodes were significantly more comfortable and required less current-density for contraction than the 2 × 2 cm electrode.ConclusionDuring low-intensity NMES-treatment, an optimized electrode size and practical placement on each individual muscle of quadriceps, hamstrings and gluteals is crucial for comfort and intensity needed for muscle contraction.

Project description:BackgroundNeuromuscular electrical stimulation (NMES) can facilitate the recovery of quadriceps muscle strength after total knee arthroplasty (TKA), yet the optimal intensity (dosage) of NMES and its effect on strength after TKA have yet to be determined.ObjectiveThe primary objective of this study was to determine whether the intensity of NMES application was related to the recovery of quadriceps muscle strength early after TKA. A secondary objective was to quantify quadriceps muscle fatigue and activation immediately after NMES to guide decisions about the timing of NMES during rehabilitation sessions.DesignThis study was an observational experimental investigation.MethodsData were collected from 30 people who were 50 to 85 years of age and who received NMES after TKA. These people participated in a randomized controlled trial in which they received either standard rehabilitation or standard rehabilitation plus NMES to the quadriceps muscle to mitigate strength loss. For the NMES intervention group, NMES was applied 2 times per day at the maximal tolerable intensity for 15 contractions beginning 48 hours after surgery over the first 6 weeks after TKA. Neuromuscular electrical stimulation training intensity and quadriceps muscle strength and activation were assessed before surgery and 3.5 and 6.5 weeks after TKA.ResultsAt 3.5 weeks, there was a significant association between NMES training intensity and a change in quadriceps muscle strength (R(2)=.68) and activation (R(2)=.22). At 6.5 weeks, NMES training intensity was related to a change in strength (R(2)=.25) but not to a change in activation (R(2)=.00). Furthermore, quadriceps muscle fatigue occurred during NMES sessions at 3.5 and 6.5 weeks, whereas quadriceps muscle activation did not change.LimitationsSome participants reached the maximal stimulator output during at least 1 treatment session and might have tolerated more stimulation.ConclusionsHigher NMES training intensities were associated with greater quadriceps muscle strength and activation after TKA.

Dataset Information

Standardizing fatigue-resistance testing during electrical stimulation of paralysed human quadriceps muscles, a practical approach.

Background

Methods

Results

Conclusion

Publications

Standardizing fatigue-resistance testing during electrical stimulation of paralysed human quadriceps muscles, a practical approach.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets