Dataset Information

Gemini Surfactant with Unsaturated Long Tails for Viscoelastic Surfactant (VES) Fracturing Fluid Used in Tight Reservoirs.

ABSTRACT: The high dosage of surfactant terribly restrains the extensive application of viscoelastic surfactant (VES) fracturing fluid. In this study, a novel gemini surfactant (GLO) with long hydrophobic tails and double bonds was prepared and a VES fracturing fluid with a low concentration of GLO was developed. Because of the long tails bending near the double bonds, there is a significant improvement of the surfactant aggregate architecture, which realized the favorable viscosity of the VES fluid at a more economical concentration than the conventional VES fracturing fluids. Fourier transform infrared spectrometry (FT-IR), nuclear magnetic resonance spectrometry (¹H NMR, ¹³C NMR), and high-resolution mass spectrometry (HRMS) were employed to study the formation of the product and the structure of GLO. The designed GLO was produced according to the results of the structure characterizations. The formula of the VES fracturing fluid was optimized to be 2.0 wt % GLO + 0.4 wt % sodium salicylate (NaSal) + 1.0 wt % KCl based on the measurements of the viscosity. The viscosity of the VES fluid decreased from 405.5 to 98.7 mPa·s as the temperature increased from 18 to 80 °C and reached equilibrium at about 70.2 mPa·s. The VES fluid showed a typical elastic pseudoplastic fluid with a yield stress of 0.5 Pa in the rheological tests. It realized a proppant setting velocity as low as 0.08 g/min in the dynamic proppant transport test carried by GLO-based VES fracturing fluid. Compared to the formation water, the filtrate of the VES fracturing fluid decreased the water contact angle (CA) from 56.2 to 45.4° and decreased the water/oil interfacial tension (IFT) from 19.5 to 1.6 mN/m. Finally, the VES fracturing fluid induced a low permeability loss rate of 10.4% and a low conductivity loss rate of 5.4% for the oil phase in the experiments of formation damage evaluation.

SUBMITTER: Huang F

PROVIDER: S-EPMC7818589 | biostudies-literature | 2021 Jan

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Gemini Surfactant with Unsaturated Long Tails for Viscoelastic Surfactant (VES) Fracturing Fluid Used in Tight Reservoirs.

Huang Feifei F Pu Chunsheng C Lu Leichao L Pei Ze Z Gu Xiaoyu X Lin Shujun S Wu Feipeng F Liu Jing J

ACS omega 20210108 2

The high dosage of surfactant terribly restrains the extensive application of viscoelastic surfactant (VES) fracturing fluid. In this study, a novel gemini surfactant (GLO) with long hydrophobic tails and double bonds was prepared and a VES fracturing fluid with a low concentration of GLO was developed. Because of the long tails bending near the double bonds, there is a significant improvement of the surfactant aggregate architecture, which realized the favorable viscosity of the VES fluid at a ...[more]

PMID: 33490819

Similar Datasets

Project description:Surfactant-based viscoelastic (SBVE) fluids are innovative nonpolymeric non-newtonian fluid compositions that have recently gained much attention from the oil industry. SBVE can replace traditional polymeric fracturing fluid composition by mitigating problems arising during and after hydraulic fracturing operations are performed. In this study, SBVE fluid systems which are entangled with worm-like micellar solutions of cationic surfactant: cetrimonium bromide or CTAB and counterion inorganic sodium nitrate salt are synthesized. The salt reagent concentration is optimized by comparing the rheological characteristics of different concentration fluids at 25 °C. The study aims to mitigate the primary issue concerning these SBVE fluids: significant drop in viscosity at high temperature and high shear rate (HTHS) conditions. Hence, the authors synthesized a modified viscoelastic fluid system using ZnO nanoparticle (NPs) additives with a hypothesis of getting fluids with improved rheology. The rheology of optimum fluids of both categories: with (0.6 M NaNO3 concentration fluid) and without (0.8 M NaNO3 concentration fluid) ZnO NPs additives were compared for a range of shear rates from 1 to 500 Sec-1 at different temperatures from 25 °C to 75 °C to visualize modifications in viscosity values after the addition of NPs additives. The rheology in terms of viscosity was higher for the fluid with 1% dispersed ZnO NPs additives at all temperatures for the entire range of shear rate values. Additionally, rheological correlation function models were derived for the synthesized fluids using statistical analysis methods. Subsequently, Herschel-Bulkley models were developed for optimum fluids depending on rheological correlation models. In the last section of the study, the pressure-drop estimation method is described using given group equations for laminar flow in a pipe depending on Herschel-Bulkley-model parameters have been identified for optimum fluids are consistency, flow index and yield stress values.

Project description:Surfactants are functional molecules comprising a water-compatible head group and a hydrophobic tail. One of their features is the formation of self-assembled structures in contact with water, for instance, micelles, vesicles, or lyotropic liquid crystals. One way to increase the functionality of surfactants is to implement moieties containing transition-metal species. Ferrocene-based surfactants represent an excellent example because of the distinguished redox features. In most existing ferrocene-based amphiphiles, an alkyl chain is classically used as the hydrophobic tail. We report the synthesis and properties of 1-triisopropylsilylethynyl-1'-trimethylammoniummethylferrocene (FcNMe3TIPS). In FcNMe3TIPS, ferrocene is part of the head group (Gemini design) but is also attached to a (protected) π-conjugated ethynyl group. Although this architecture differs from that of classical amphiphiles and those of other ferrocene-based amphiphiles, the compound shows marked surfactant properties comparable to those of lipids, exhibiting a very low value of critical aggregation concentration in water (cac = 0.03 mM). It forms classical micelles only in a very narrow concentration range, which then convert into monolayer vesicles. Unlike classical surfactants, aggregates already form at a very low concentration, far beneath that required for the formation of a monolayer at the air-water interface. At even higher concentration, FcNMe3TIPS forms lyotropic liquid crystals, not only in contact with water, but also in a variety of organic solvents. As an additional intriguing feature, FcNMe3TIPS is amenable to a range of further modification reactions. The TIPS group is easily cleaved, and the resulting ethynyl function can be used to construct heterobimetallic platinum-ferrocene conjugates with trans-Pt(PEt3)2X (X = Cl, I) complex entities, leading to a heterobimetallic surfactant. We also found that the benzylic α-position of FcNMe3TIPS is rather reactive and that the attached ammonium group can be exchanged by other substituents (e.g., -CN), which offers additional opportunities for further functionalization. Although FcNMe3TIPS is reversibly oxidized in voltammetric and UV-vis spectroelectrochemical experiments, the high reactivity at the α-position is also responsible for the instability of the corresponding ferrocenium ion, leading to a polymerization reaction.

Dataset Information

Gemini Surfactant with Unsaturated Long Tails for Viscoelastic Surfactant (VES) Fracturing Fluid Used in Tight Reservoirs.

Publications

Gemini Surfactant with Unsaturated Long Tails for Viscoelastic Surfactant (VES) Fracturing Fluid Used in Tight Reservoirs.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets