Dataset Information

Numerical study of probe parameters on performance of a transonic axial compressor.

ABSTRACT: The paper shows the effect of the probe on the performance of a transonic axial speed compressor. The unobstructed flow case with the experimental data was validated and used as a guide for all subsequent study cases. The aerodynamic performance for different probe parameters were calculated numerically using ANSYS-CFX. This covered the results on compressor output from changing probe axial positions, the radial immersion depths, the size of the probe, and the total number of probes. The findings were evaluated in relation to the total pressure ratio, performance, margin of deflation and stability. The velocity part distributions further showed that the probe block and raises the flow Mach value, which is the explanation why the compressor rotor's total pressure ratio is lost. In fact, the parameters of the sample will significantly influence the calculation outcomes and affect the standard margin. The range of stability was also affected, which changes the performance trend from the choke to the stall. Consequently, the collection of correct probe parameters with fewer impact on compressor output is addressed.

SUBMITTER: Islam A

PROVIDER: S-EPMC7833163 | biostudies-literature | 2021

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Numerical study of probe parameters on performance of a transonic axial compressor.

Islam Asad A Ma Hongwei H

PloS one 20210125 1

The paper shows the effect of the probe on the performance of a transonic axial speed compressor. The unobstructed flow case with the experimental data was validated and used as a guide for all subsequent study cases. The aerodynamic performance for different probe parameters were calculated numerically using ANSYS-CFX. This covered the results on compressor output from changing probe axial positions, the radial immersion depths, the size of the probe, and the total number of probes. The finding ...[more]

PMID: 33493220

Similar Datasets

Project description:BackgroundPrevious masticatory studies have focused on a variety of measurements of foods and boluses or kinematic parameters and sound during mastication. To date, the masticatory sound research of has been limited due to the difficulties of sound collection and accurate analysis. Therefore, significant progress in masticatory sound has not been made. Meanwhile, the correlation between acoustic parameters and mastication performance remains unclear. For the purpose of exploring the acoustic parameters in measuring mastication performance, the bone-conduction techniques and sound analysis were used, and a statistical analysis of acoustic and occlusal parameters were conducted.MethodsThe gnathosonic and chewing sounds of fifty-six volunteers with healthy dentate were recorded by a bone-conduction microphone and further analyzed by Praat 5.4.04 when intercuspally occluding natural foods (peanuts) were consumed. The granulometry of the expectorated boluses from the peanuts was characterized by the median particle size of the whole chewing sequence (D50a) and the median particle size during the fixed chewing strokes (D50b). The chewing time of the whole chewing sequence (CTa), the chewing time of the fixed chewing strokes (CTb), the chewing cycles (CC), and the chewing frequency (CF) were recorded and analyzed by the acoustic software. The acoustic parameters, including gnathosonic pitch, gnathosonic intensity, mastication sound pitch of the whole chewing sequence (MPa), mastication sound pitch of the fixed chewing strokes (MPb), mastication sound intensity of the whole chewing sequence (MIa) and mastication sound intensity of the fixed chewing strokes (MIb), were analyzed. Independent sample t-test, Spearman and Pearson correlation analyses were used where applicable.ResultsSignificant difference in parameters CC, MIa, CF and D50a were found by sex (t-test, p < 0.01). The masticatory degree of the test foods was higher in women (CC, 24.25 ± 5.23; CF, 1.70 ± 0.21 s-1; D50a, 1655.07 ± 346.21 μm) than in men (CC, 18.14 ± 6.38; CF, 1.48 ± 0.18 s-1; D50a, 2159.21 ± 441.26 μm). In the whole chewing sequence study, a highly negative correlation was found between MIa and D50a, and a highly positive correlation was found between MIa and CF (r = - 0.94, r = 0.82, respectively, p < 0.01). No significant correlation was found between the remaining acoustic parameters and mastication parameters. In the fixed chewing strokes study, a highly negative correlation was found between MIb and D50b (r = - 0.85, p < 0.01). There was no significant correlation between the rest of the acoustic parameters and the mastication parameters.ConclusionsMastication sound intensity may be a valuable indicator for assessing mastication. Acoustic analysis can provide a more convenient and quick method of assessing mastication performance.

Dataset Information

Numerical study of probe parameters on performance of a transonic axial compressor.

Publications

Numerical study of probe parameters on performance of a transonic axial compressor.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets