Browse
Submit Data
Databases
API
Help

Dataset Information

9 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Influence of extrusion cooking on phytochemical, physical and sorption isotherm properties of rice extrudate infused with microencapsulated anthocyanin.

ABSTRACT: The effect of extrusion cooking on the quality of rice extrudate with infused microencapsulated anthocyanin was investigated. The moisture sorption isotherm of the extrudate was also studied. The rotatable central composite design was used to optimize the extrusion process and the optimized conditions were: screw speed, 121 rpm; barrel temperature, 91.89 °C; and moisture content, 22.03%. The extrudate showed anthocyanin content of 0.218 mg/L; true density, 1.48 g/cc; water activity 0.51, water solubility index, 7.49%; and specific mechanical energy, 31.39 kJ/kg. The antioxidant activity and solubility of the extrudate were higher as compared with native extrudate. The moisture sorption isotherm of the extrudate was found to follow type III isotherm behavior according to the Brunauer-Emmett-Teller classification. The sorption isotherm was analyzed using several models and the Caurie and Peleg models were best fitted with the extrudate isotherm data. The present work manifested a way to develop antioxidant rich extrudate.

SUBMITTER: Das AB

PROVIDER: S-EPMC7847424 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Controlling extrudate volume fraction through poroelastic extrusion of entangled looped fibers.

Project description:When a suspension of spherical or near-spherical particles passes through a constriction the particle volume fraction either remains the same or decreases. In contrast to these particulate suspensions, here we observe that an entangled fiber suspension increases its volume fraction up to 14-fold after passing through a constriction. We attribute this response to the entanglements among the fibers that allows the network to move faster than the liquid. By changing the fiber geometry, we find that the entanglements originate from interlocking shapes or high fiber flexibility. A quantitative poroelastic model is used to explain the increase in velocity and extrudate volume fraction. These results provide a new strategy to use fiber volume fraction, flexibility, and shape to tune soft material properties, e.g., suspension concentration and porosity, during delivery, as occurs in healthcare, three-dimensional printing, and material repair.

| S-EPMC9985605 | biostudies-literature

Sorption Isotherm of Southern Yellow Pine-High Density Polyethylene Composites.

Project description:Temperature and relative humidity (RH) are two major external factors, which affect equilibrium moisture content (EMC) of wood-plastic composites (WPCs). In this study, the effect of different durability treatments on sorption and desorption isotherms of southern yellow pine (SYP)-high density polyethylene (HDPE) composites was investigated. All samples were equilibriumed at 20 °C and various RHs including 16%, 33%, 45%, 66%, 75%, 85%, 93%, and100%. EMCs obtained from desorption and absorption for different WPC samples were compared with Nelson's sorption isotherm model predictions using the same temperature and humidity conditions. The results indicated that the amount of moisture absorbed increased with the increases in RH at 20 °C. All samples showed sorption hysteresis at a fixed RH. Small difference between EMC data of WPC samples containing different amount of ultraviolet (UV) stabilizers were observed. Similar results were observed among the samples containing different amount of zinc borate (ZB). The experimental data of EMCs at various RHs fit to the Nelson's sorption isotherm model well. The Nelson's model can be used to predicate EMCs of WPCs under different RH environmental conditions.

| S-EPMC5455233 | biostudies-other

Three-Dimensional (3D) Printed Microneedles for Microencapsulated Cell Extrusion.

Project description:Cell-hydrogel based therapies offer great promise for wound healing. The specific aim of this study was to assess the viability of human hepatocellular carcinoma (HepG2) cells immobilized in atomized alginate capsules (3.5% (w/v) alginate, d = 225 µm ± 24.5 µm) post-extrusion through a three-dimensional (3D) printed methacrylate-based custom hollow microneedle assembly (circular array of 13 conical frusta) fabricated using stereolithography. With a jetting reliability of 80%, the solvent-sterilized device with a root mean square roughness of 158 nm at the extrusion nozzle tip (d = 325 μm) was operated at a flowrate of 12 mL/min. There was no significant difference between the viability of the sheared and control samples for extrusion times of 2 h (p = 0.14, α = 0.05) and 24 h (p = 0.5, α = 0.05) post-atomization. Factoring the increase in extrusion yield from 21.2% to 56.4% attributed to hydrogel bioerosion quantifiable by a loss in resilience from 5470 (J/m³) to 3250 (J/m³), there was no significant difference in percentage relative payload (p = 0.2628, α = 0.05) when extrusion occurred 24 h (12.2 ± 4.9%) when compared to 2 h (9.9 ± 2.8%) post-atomization. Results from this paper highlight the feasibility of encapsulated cell extrusion, specifically protection from shear, through a hollow microneedle assembly reported for the first time in literature.

| S-EPMC6164407 | biostudies-literature

Effect of extrusion conditions on the physicochemical and phytochemical properties of red rice and passion fruit powder based extrudates.

Project description:The passion fruit powder blended rice flour based extrudate was developed and investigated in terms of physicochemical and phytochemical properties. The extrusion process was performed using a twin screw extruder and optimized using rotatable central composite design followed by response surface methodology. The effect of process parameters such as temperature (80-150 °C), screw speed (200-400 rpm), moisture content (20-30%) and passion fruit powder (0-15%) on product quality was investigated. The optimum extrusion conditions of temperature, screw speed, feed moisture content, and passion fruit powder were 97.50 °C, 250 rpm, 25.20% and 11.25%, respectively. At optimum condition, the predicted values of responses were expansion ratio 8.05, water absorption index 2.77, total phenolic content 129.492 mg GAE/100 g and DPPH scavenging activity 65.79%. A comparison between optimized and control extrudates revealed that thermal, crystallinity and morphological properties of extrudates differed significantly. The comparison was also conducted in terms of FT-IR, SEM-EDS and HPLC analysis. The phytochemical properties showed that ?-carotene, cyanidin-3-glucoside, peonidin-3-D-glucoside chloride were higher in control whereas the optimized sample evinced more (±)-?-tocopherol and D-?-tocopherol.

| S-EPMC6233432 | biostudies-literature

Extrusion-Cooking Modifies Physicochemical and Nutrition-Related Properties of Wheat Bran.

Project description:The potential of extrusion-cooking to change the physicochemical characteristics of wheat bran, increase its nutritional value and decrease its recalcitrance towards fermentation was investigated in this study. The conditions in a twin-screw extruder were varied by changing screw configuration, moisture content and barrel temperature. The former was not previously investigated in studies on bran extrusion. Extrusion-cooking resulted in an increased water-holding capacity and extract viscosity of bran, suggesting shear-induced structure degradation and structure loosening due to steam explosion at the extruder outlet. Modelling showed that the extent of these modifications mainly correlates with the amount of specific mechanical energy (SME) input, which increases with an increasing number of work sections in the screw configuration and a decreasing moisture content and barrel temperature. Extrusion led to solubilisation of arabinoxylan and ferulic acid. Moreover, it led to starch melting and phytate degradation. Upon fermentation of the most modified sample using a human faecal inoculum, small numeric pH decreases and short-chain fatty acid production increases were observed compared to the control bran, while protein fermentation was decreased. Overall, extrusion-cooking can improve the nutrition-related properties of wheat bran, making it an interesting technique for the modification of bran before further use or consumption as an extruded end product.

| S-EPMC7353595 | biostudies-literature

Moisture migration analysis of Chinese naked oat during different storage conditions by sorption isotherm model and low-field NMR.

Project description:Moisture migration is considered to be one of the most important influencer on crop quality during storage, which is easily affected by storage conditions, such as ambient humidity and temperature. The aim of this work was to determine the effect of storage condition on moisture content of Chinese naked oat by simulating 9 equilibrium relative humidity (ERH) and 5 temperatures. The equilibrium moisture content (EMC) of dry sample was achieved by adsorption, while EMC of wet one was achieved by desorption. EMC of oat increased with the increase in ERH and decreased when temperature increased. The sorption isotherm was a typical "S" shape and fitted using current EMC/ERH models. Modified Chung-Pfost (MCPE) model was the most suitable for describing the dynamic sorption process of Chinese naked oat during storage with a ERH range from 10% to 90%. There was an obvious hysteresis between adsorption and desorption isotherms, whose range decreased with the increase of temperature. High temperature accelerated moisture migration by increasing the hydrophilicity of oat surface. Moreover, dynamic moisture migration was imaged by low-field nuclear magnetic resonance (NMR), showing that moisture migrated between ambient environment and oat mainly through endosperm where most moisture accumulated. During sorption, free water migrated firstly, followed by bound water and the change in content of bound water was more stable than that of free water. The results of this study can provide a useful information for future work on quality control of oat during storage.

| S-EPMC7063355 | biostudies-literature

Sorption Properties of PET Copolyesters and New Approach for Foaming with Filament Extrusion Additive Manufacturing.

Project description:The mass transfer process of binary esters of acetic acid in polyethylene terephthalate (PET), polyethylene terephthalate with a high degree of glycol modification (PETG), and glycol-modified polycyclohexanedimethylene terephthalate (PCTG) was studied. It was found that the desorption rate of the complex ether at the equilibrium point is significantly lower than the sorption rate. The difference between these rates depends on the type of polyester and temperature and allows the accumulation of ester in the volume of the polyester. For example, the stable content of acetic ester in PETG at 20 °C is 5 wt.%. The remaining ester, which has the properties of a physical blowing agent, was used in the filament extrusion additive manufacturing (AM) process. By varying the technological parameters of the AM process, foams of PETG with densities ranging from 150 to 1000 g/cm3 were produced. Unlike conventional polyester foams, the resulting foams are not brittle.

| S-EPMC10006899 | biostudies-literature

The Profile and Bioaccessibility of Phenolic Compounds in Cereals Influenced by Improved Extrusion Cooking Treatment.

Project description:The aim of this study was to investigate the effect of Improved Extrusion Cooking Treatment (IECT) on the phenolics and its bioaccessibility in cereals, represented by brown rice, wheat, and oat. Data showed that total phenolic content and total antioxidant activity in free form were significantly decreased, while the bound form was increased after IECT. After IECT, the total free phenolic acids of brown rice and wheat were significantly decreased by 5.88% and 45.66%, respectively, while the total bound phenolic acids of brown rice, wheat, and oat were significantly increased by 6.45%, 8.78%, and 9.10%, respectively. Brown rice provided the most bioaccessible phenolics and antioxidant compounds, followed by oat and wheat. IECT significantly decreased the bioaccessible phenolics of brown rice and oat by 31.09% and 30.95%, while it had minimal effect on the bioaccessible phenolics of wheat. These results showed that IECT greatly affected the phenolics and its bioaccessibiltiy of cereals, with the effect depending on cereal matrix and the sensitivity of free and bound phenolics. Furthermore, bioaccessible phenolic acids of raw and processed cereals were considerably low, and it slightly contributed to the bioaccessible phenolics.

| S-EPMC4981441 | biostudies-literature

A Rice B-Box Protein, OsBBX14, Finely Regulates Anthocyanin Biosynthesis in Rice.

Project description:Anthocyanins are responsible pigments for giving attractive colors of plant organs and nutraceutical benefits of grains. Anthocyanin biosynthesis is known to be regulated by transcription factors and other regulatory proteins. In rice (Oryza sativa), the R2R3 MYB transcription factor (TF) OsC1 and a bHLH TF, OsB2, were previously reported to control anthocyanin biosynthesis in vegetative tissues and seeds, respectively; however, the regulatory mechanisms of the anthocyanin biosynthesis by TFs remain largely unknown. In this study, we identified OsBBX14, a homolog of Arabidopsis thaliana B-box domain protein 22 (AtBBX22), and investigated its function. The transcript level of OsBBX14 was high in pigmented rice seeds and gradually increased as the seeds matured. The ectopic expression of OsBBX14 in Arabidopsis resulted in a dramatic increase in anthocyanin accumulation in its seedlings. Using a steroid receptor-based inducible activation system, OsBBX14 and OsHY5 were found to directly activate OsC1 or OsB2 in an independent or collaborative manner. Yeast two hybrid revealed that the second B-box domain of OsBBX14 physically interacts with the bZIP domain of OsHY5. These results suggest that the anthocyanin biosynthesis in rice is induced and finely tuned by OsBBX14 in collaboration with OsHY5.

| S-EPMC6121638 | biostudies-literature

Quality attributes and cooking properties of commercial Thai rice noodles.

Project description:One of the most popular and abundant traditional foods in Asian countries is dried rice noodles. In fact, the demand for this product has increased steadily around the world in recent years. The qualities of rice noodles are directly related to the specific preferences of consumers. Hence, the present study aimed to determine the properties of eight commercial dried rice noodles that are readily available in most Thai markets. The specific properties under investigation and comparison in this study were proximate composition, amylose content, color, pasting quality, cooking quality, texture, and sensory properties. The specimens were divided into two groups: white (A, B, C, D, and E) and colored rice noodles (F, G, and H). The results showed that the proximate composition, amylose content, and color of both white and colored rice noodles were significantly different (p < 0.05). The lowest cooking losses in white and colored rice noodles were 0.11% (B) and 2.03% (G) (p < 0.05), respectively. Higher values of pasting (setback and final viscosities) and texture properties (tensile strength and extensibility) provided higher overall acceptability. The highest scores for acceptability of white and colored rice noodles were 7.00 (B) and 5.87 (H) (p < 0.05), respectively.

| S-EPMC8034366 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data