Dataset Information

Force-velocity profiling in athletes: Reliability and agreement across methods.

ABSTRACT: The aim of the study was to examine the test-retest reliability and agreement across methods for assessing individual force-velocity (FV) profiles of the lower limbs in athletes. Using a multicenter approach, 27 male athletes completed all measurements for the main analysis, with up to 82 male and female athletes on some measurements. The athletes were tested twice before and twice after a 2- to 6-month period of regular training and sport participation. The double testing sessions were separated by ~1 week. Individual FV-profiles were acquired from incremental loading protocols in squat jump (SJ), countermovement jump (CMJ) and leg press. A force plate, linear encoder and a flight time calculation method were used for measuring force and velocity during SJ and CMJ. A linear regression was fitted to the average force and velocity values for each individual test to extrapolate the FV-variables: theoretical maximal force (F0), velocity (V0), power (Pmax), and the slope of the FV-profile (SFV). Despite strong linearity (R2>0.95) for individual FV-profiles, the SFV was unreliable for all measurement methods assessed during vertical jumping (coefficient of variation (CV): 14-30%, interclass correlation coefficient (ICC): 0.36-0.79). Only the leg press exercise, of the four FV-variables, showed acceptable reliability (CV:3.7-8.3%, ICC:0.82-0.98). The agreement across methods for F0 and Pmax ranged from (Pearson r): 0.56-0.95, standard error of estimate (SEE%): 5.8-18.8, and for V0 and SFV r: -0.39-0.78, SEE%: 12.2-37.2. With a typical error of 1.5 cm (5-10% CV) in jump height, SFV and V0 cannot be accurately obtained, regardless of the measurement method, using a loading range corresponding to 40-70% of F0. Efforts should be made to either reduce the variation in jumping performance or to assess loads closer to the FV-intercepts. Coaches and researchers should be aware of the poor reliability of the FV-variables obtained from vertical jumping, and of the differences across measurement methods.

SUBMITTER: Lindberg K

PROVIDER: S-EPMC7850492 | biostudies-literature | 2021

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Force-velocity profiling in athletes: Reliability and agreement across methods.

Lindberg Kolbjørn K Solberg Paul P Bjørnsen Thomas T Helland Christian C Rønnestad Bent B Thorsen Frank Martin M Haugen Thomas T Østerås Sindre S Kristoffersen Morten M Midttun Magnus M Sæland Fredrik F Paulsen Gøran G

PloS one 20210201 2

The aim of the study was to examine the test-retest reliability and agreement across methods for assessing individual force-velocity (FV) profiles of the lower limbs in athletes. Using a multicenter approach, 27 male athletes completed all measurements for the main analysis, with up to 82 male and female athletes on some measurements. The athletes were tested twice before and twice after a 2- to 6-month period of regular training and sport participation. The double testing sessions were separate ...[more]

PMID: 33524058

Similar Datasets

Project description:The purposes of this study were to establish test-retest reliability of calculating load-velocity profiles in front crawl swimming using five and three different external loads, and if outcome results were comparable between calculation methods for monitoring performance over time. Fifteen swimmers at either national or international competition level (seven females and eight males) participated in this study. The subjects performed 25 m of semi-tethered swimming with maximal effort with five progressive loads (females 1, 2, 3, 4, and 5 kg and males 1, 3, 5, 7, and 9 kg) as well as 50 m maximal front crawl on 2 different days. The mean velocity during three stroke cycles in mid-pool was calculated and plotted as a function of the external load. Relationship between the load and velocity was expressed by a linear regression line and established for each swimmer. The intercepts between the axes of the plot and the established regression line were defined as theoretical maximum velocity (V0) and load (L0). In addition, L0 was also expressed as a percentage of body mass (rL0). The coefficient of determination (R2) and the slope (Slv) of the linear load-velocity relationship were calculated. The intra-class correlation coefficient (ICC) showed excellent agreement (ICC ≥0.902) for all variables. The coefficient of variation was ≤3.14% and typical error was rated as "good" in all variables. A difference was found between day 1 and 2 in V0 for three- and five-load calculations and for 50 m front crawl time (p < 0.05). No difference was found between the load-velocity profile outcomes variables compared between the three- and five-trial protocols on neither day 1 nor 2. The Bland-Altman plots showed a small bias across all resistance conditions for five loads, L0: 0.04 kg, rL0: 0.13%, V0: -0.03 m/s, and Slv: 0.003 -m/s/kg and for three loads, L0: -0.24 kg, rL0: -0.27%, V0: -0.04 m/s, Slv: 0.002 -m/s/kg. In conclusion, the load-velocity profile for front crawl swimming can be calculated with high reliability from both five and three external loads and comparable results in outcome variables were established. These methods can be used to monitor performance parameters over time, and to investigate and compare swimmers' velocity and strength capabilities to allow for individualized training prescription to improve performance.

Project description:PurposeThe main aim of this investigation was to quantify differences in sprint mechanical variables across sports and within each sport. Secondary aims were to quantify sex differences and relationships among the variables.MethodsIn this cross-sectional study of elite athletes, 235 women (23 ± 5 y and 65 ± 7 kg) and 431 men (23 ± 4 y and 80 ± 12 kg) from 23 different sports (including 128 medalists from World Championships and/or Olympic Games) were tested in a 40-m sprint at the Norwegian Olympic Training Center between 1995 and 2018. These were pre-existing data from quarterly or semi-annual testing that the athletes performed for training purposes. Anthropometric and speed-time sprint data were used to calculate the theoretical maximal velocity, horizontal force, horizontal power, slope of the force-velocity relationship, maximal ratio of force, and index of force application technique.ResultsSubstantial differences in mechanical profiles were observed across sports. Athletes in sports in which sprinting ability is an important predictor of success (e.g., athletics sprinting, jumping and bobsleigh) produced the highest values for most variables, whereas athletes in sports in which sprinting ability is not as important tended to produce substantially lower values. The sex differences ranged from small to large, depending on variable of interest. Although most of the variables were strongly associated with 10- and 40-m sprint time, considerable individual differences in sprint mechanical variables were observed among equally performing athletes.ConclusionsOur data from a large sample of elite athletes tested under identical conditions provides a holistic picture of the force-velocity-power profile continuum in athletes. The data indicate that sprint mechanical variables are more individual than sport specific. The values presented in this study could be used by coaches to develop interventions that optimize the training stimulus to the individual athlete.

Project description:Background: Properly performed training is a matter of importance for endurance athletes (EA). It allows for achieving better results and safer participation. Recently, the development of machine learning methods has been observed in sports diagnostics. Velocity at anaerobic threshold (VAT), respiratory compensation point (VRCP), and maximal velocity (Vmax) are the variables closely corresponding to endurance performance. The primary aims of this study were to find the strongest predictors of VAT, VRCP, Vmax, to derive and internally validate prediction models for males (1) and females (2) under TRIPOD guidelines, and to assess their machine learning accuracy. Materials and Methods: A total of 4001 EA (nmales = 3300, nfemales = 671; age = 35.56 ± 8.12 years; BMI = 23.66 ± 2.58 kg·m−2; VO2max = 53.20 ± 7.17 mL·min−1·kg−1) underwent treadmill cardiopulmonary exercise testing (CPET) and bioimpedance body composition analysis. XGBoost was used to select running performance predictors. Multivariable linear regression was applied to build prediction models. Ten-fold cross-validation was incorporated for accuracy evaluation during internal validation. Results: Oxygen uptake, blood lactate, pulmonary ventilation, and somatic parameters (BMI, age, and body fat percentage) showed the highest impact on velocity. For VAT R2 = 0.57 (1) and 0.62 (2), derivation RMSE = 0.909 (1); 0.828 (2), validation RMSE = 0.913 (1); 0.838 (2), derivation MAE = 0.708 (1); 0.657 (2), and validation MAE = 0.710 (1); 0.665 (2). For VRCP R2 = 0.62 (1) and 0.67 (2), derivation RMSE = 1.066 (1) and 0.964 (2), validation RMSE = 1.070 (1) and 0.978 (2), derivation MAE = 0.832 (1) and 0.752 (2), validation MAE = 0.060 (1) and 0.763 (2). For Vmax R2 = 0.57 (1) and 0.65 (2), derivation RMSE = 1.202 (1) and 1.095 (2), validation RMSE = 1.205 (1) and 1.111 (2), derivation MAE = 0.943 (1) and 0.861 (2), and validation MAE = 0.944 (1) and 0.881 (2). Conclusions: The use of machine-learning methods allows for the precise determination of predictors of both submaximal and maximal running performance. Prediction models based on selected variables are characterized by high precision and high repeatability. The results can be used to personalize training and adjust the optimal therapeutic protocol in clinical settings, with a target population of EA.

Dataset Information

Force-velocity profiling in athletes: Reliability and agreement across methods.

Publications

Force-velocity profiling in athletes: Reliability and agreement across methods.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets