Dataset Information

Randomized controlled trial comparing the effectiveness of mass and spaced learning in microsurgical procedures using computer aided assessment.

ABSTRACT: Spaced-learning refers to teaching spread over time, compared to mass-learning where the same duration of teaching is completed in one session. Our hypothesis is that spaced-learning is better than mass-learning in retaining microsurgical suturing skills. Medical students were randomized into mass-learning (single 8-h session) and spaced-learning (2-h weekly sessions over 4 weeks) groups. They were taught to place 9 sutures in a 4 mm-wide elastic strip. The primary outcome was precision of suture placement during a test conducted 1 month after completion of sessions. Secondary outcomes were time taken, cumulative performance, and participant satisfaction. 42 students (24 in the mass-learning group; 18 in spaced-learning group) participated. 3 students in the spaced-learning group were later excluded as they did not complete all sessions. Both groups had comparable baseline suturing skills but at 1 month after completion of teaching, the total score for suture placement were higher in spaced-learning group (27.63 vs 31.60,p?=?0.04). There was no statistical difference for duration and satisfaction in either group. Both groups showed an improvement in technical performance over the sessions, but this did not differ between both groups. Microsurgical courses are often conducted in mass-learning format so spaced learning offers an alternative that enhances retention of complex surgical skills.

SUBMITTER: Teo WZW

PROVIDER: S-EPMC7854604 | biostudies-literature | 2021 Feb

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Randomized controlled trial comparing the effectiveness of mass and spaced learning in microsurgical procedures using computer aided assessment.

Teo Wendy Z W WZW Dong Xiaoke X Yusoff Siti Khadijah Bte Mohd SKBM Das De Soumen S Chong Alphonsus K S AKS

Scientific reports 20210202 1

Spaced-learning refers to teaching spread over time, compared to mass-learning where the same duration of teaching is completed in one session. Our hypothesis is that spaced-learning is better than mass-learning in retaining microsurgical suturing skills. Medical students were randomized into mass-learning (single 8-h session) and spaced-learning (2-h weekly sessions over 4 weeks) groups. They were taught to place 9 sutures in a 4 mm-wide elastic strip. The primary outcome was precision of sutur ...[more]

PMID: 33531563

Similar Datasets

Project description:IntroductionCustom insoles are a routine treatment for many foot pathologies, and the use of computer-aided design and computer-aided manufacturing (CAD/CAM) is well established within clinical practice in the UK. The method of foot shape capture used to produce insoles varies throughout orthotic services. This trial aims to investigate the effectiveness of two common shape-capture techniques on patient-reported outcomes in people who require insoles for a foot or ankle pathology.Methods and analysisThis double-blinded randomised controlled trial will involve two intervention groups recruited from a National Health Service orthotic service. Participants will be randomly assigned to receive a pair of custom CAD/CAM insoles, manufactured either from a direct digital scan or a foam box cast of their feet and asked to wear the insoles for 12 weeks. The primary outcome measure will be the Foot Health Status Questionnaire (FHSQ) pain subdomain, recorded at baseline (immediately after receiving the intervention), 4, 8 and 12 weeks post intervention. Secondary outcome measures will include FHSQ foot function and foot health subdomains recorded at baseline, 4, 8 and 12 weeks. The Orthotic and Prosthetic User Survey Satisfaction with Device will be recorded at 12 weeks. The transit times associated with each arm will be measured as the number of days for each insole to be delivered after foot shape capture. Tertiary outcome measures will include participant recruitment and dropout rates, and intervention adherence measured as the daily usage of the insoles over 12 weeks. The change in FHSQ scores for the subdomains and insole usage will be compared between the groups and time points, and between group differences in time in transit, cost-time analysis and environmental impact will be compared.Ethics and disseminationEthical approval was obtained from the Health Research Authority, London Stanmore Research Ethics Committee (22/LO/0579). Study findings will be submitted for publication in peer-reviewed journals, conference presentations and webinars.Trial registration numberNCT05444192.

Project description:Chest X-ray (CXR) imaging is one of the most feasible diagnosis modalities for early detection of the infection of COVID-19 viruses, which is classified as a pandemic according to the World Health Organization (WHO) report in December 2019. COVID-19 is a rapid natural mutual virus that belongs to the coronavirus family. CXR scans are one of the vital tools to early detect COVID-19 to monitor further and control its virus spread. Classification of COVID-19 aims to detect whether a subject is infected or not. In this article, a model is proposed for analyzing and evaluating grayscale CXR images called Chest X-Ray COVID Network (CXRVN) based on three different COVID-19 X-Ray datasets. The proposed CXRVN model is a lightweight architecture that depends on a single fully connected layer representing the essential features and thus reducing the total memory usage and processing time verse pre-trained models and others. The CXRVN adopts two optimizers: mini-batch gradient descent and Adam optimizer, and the model has almost the same performance. Besides, CXRVN accepts CXR images in grayscale that are a perfect image representation for CXR and consume less memory storage and processing time. Hence, CXRVN can analyze the CXR image with high accuracy in a few milliseconds. The consequences of the learning process focus on decision making using a scoring function called SoftMax that leads to high rate true-positive classification. The CXRVN model is trained using three different datasets and compared to the pre-trained models: GoogleNet, ResNet and AlexNet, using the fine-tuning and transfer learning technologies for the evaluation process. To verify the effectiveness of the CXRVN model, it was evaluated in terms of the well-known performance measures such as precision, sensitivity, F1-score and accuracy. The evaluation results based on sensitivity, precision, recall, accuracy, and F1 score demonstrated that, after GAN augmentation, the accuracy reached 96.7% in experiment 2 (Dataset-2) for two classes and 93.07% in experiment-3 (Dataset-3) for three classes, while the average accuracy of the proposed CXRVN model is 94.5%.

Project description:BackgroundAlthough miniscrews are widely used in orthodontic treatment as temporary anchorage devices, their correct and safe placement has attracted little attention. This study aimed to introduce a novel cone beam CT (CBCT) image-based computer aided design and computer aided manufacturing (CAD-CAM) template for orthodontic miniscrew implantation and to evaluate the effectiveness of miniscrews implanted under the guidance of this template.MethodsThe CBCT scans of ten patients requiring miniscrews as anchorage were analyzed in NNT software to predetermine the insertion sites of miniscrew implants. The DICOM data of the scans, along with virtual miniscrews acquired in Solidworks software, were imported into Mimics software to construct three-dimensional (3D) images of teeth and bone and to determine the virtual position of miniscrews and 3D virtual templates were designed following consideration of the virtual implantation plans. A STL (Stereolithography) file of the virtual template was output, and the resin template was then fabricated with a stereolithographic appliance (SLA). 24 Miniscrews were then implanted guided by the template and clinical evaluation of their safety and stability, as well as their placement deviations, were made. A dental casts model and cephalometric analysis before and after orthodontic treatment were made to assess the dentomaxillofacial changes.ResultsAll 24 miniscrews had no contact with adjacent roots. 18 miniscrews had a grade I safety score and six had a grade II. The miniscrews were stable at 1, 3, 6, and 9 months after implantation, although there was mild inflammation around two miniscrews. Implantation deviation of miniscrew in the crown was (1.03±0.65) and (1.26±0.72) mm in the apex, on average. Satisfactory dentomaxillofacial changes in 10 patients with these 24 miniscrews as anchorage were acquired.ConclusionsMiniscrews could be implanted in the targeted position safely and precisely when guided by the novel templates, and remained stable during orthodontic treatment. Patients treated with these miniscrews as anchorage in orthodontic treatment acquired satisfactory dentomaxillofacial changes.

Project description:BackgroundColposcopy is widely used to detect cervical cancer, but developing countries lack the experienced colposcopists necessary for accurate diagnosis. Artificial intelligence (AI) is being widely used in computer-aided diagnosis (CAD) systems. In this study, we developed and validated a CAD model based on deep learning to classify cervical lesions on colposcopy images.MethodsPatient data, including clinical information, colposcopy images, and pathological results, were collected from Qilu Hospital. The study included 15,276 images from 7,530 patients. We performed two tasks in this study: normal cervix (NC) vs. low grade squamous intraepithelial lesion or worse (LSIL+) and high-grade squamous intraepithelial lesion (HSIL)- vs. HSIL+. The residual neural network (ResNet) probability was calculated for each patient to reflect the probability of lesions through a ResNet model. Next, a combination model was constructed by incorporating the ResNet probability and clinical features. We divided the dataset into a training set, validation set, and testing set at a ratio of 7:1:2. Finally, we randomly selected 300 patients from the testing set and compared the results with the diagnosis of a senior colposcopist and a junior colposcopist.ResultsThe model that combines ResNet and clinical features performs better than ResNet alone. In the classification of NC and LSIL+, the area under the receiver operating characteristic curve (AUC), accuracy, sensitivity, specificity, positive predictive value (PPV) and negative predictive value (NPV) were 0.953, 0.886, 0.932, 0.846, 0.838, and 0.936, respectively. In the classification of HSIL- and HSIL+, the AUC, accuracy, sensitivity, specificity, PPV, and NPV were 0.900, 0.807, 0.823, 0.800, 0.618, and 0.920, respectively. In the two classification tasks, the diagnostic performance of the model was determined to be comparable to that of the senior colposcopist and exhibited a stronger diagnostic performance than the junior colposcopist.ConclusionsThe CAD system for cervical lesion diagnosis based on deep learning performs well in the classification of cervical lesions and can provide an objective diagnostic basis for colposcopists.

Dataset Information

Randomized controlled trial comparing the effectiveness of mass and spaced learning in microsurgical procedures using computer aided assessment.

Publications

Randomized controlled trial comparing the effectiveness of mass and spaced learning in microsurgical procedures using computer aided assessment.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets