Dataset Information

Optimal Technique for Measurement of Linear Left Ventricular Dimensions.

ABSTRACT:

Introduction

Echocardiographic assessment of the left ventricle (LV) begins with the measurement of linear dimensions that approximate its ellipsoid diameter. These linear dimensions have historically been measured at the basal level of the LV, which is not representative of its true diameter. The objective of this study was to determine the optimal level to measure LV cavity dimensions to more accurately estimate its size and mass.

Methods

The derivation study included 75 patients who had a clinically indicated cardiac magnetic resonance (CMR) exam for ischemic heart disease (n = 15), nonischemic cardiomyopathy (n = 25), or normal studies (n = 35). The three-chamber bright blood cine sequence was analyzed using a custom MATLAB program to measure the LV cavity diameter and wall thickness at 15 equidistant levels from base to apex. The linear measurements from each of these levels were compared against the CMR volumetric reference standard. The validation study included 100 patients who had a clinically indicated echocardiogram and CMR within 3 days for ischemic heart disease (n = 20), nonischemic cardiomyopathy (n = 44), and normal or near-normal studies (n = 36). The parasternal long-axis cine sequence was analyzed to measure the LV cavity diameter and wall thickness at the traditional basal level and the midventricular level, which were compared against the CMR volumetric reference standard.

Results

In both the derivation and validation studies, the midventricular linear dimensions, defined as those located at the true (maximal) diameter of the LV ellipsoid cavity, were found to be more closely correlated with the volumetric reference standard for LV mass, LV end-diastolic size, and LV ejection fraction.

Conclusions

Measurement of linear dimensions at the midventricular level better reflects the ellipsoid geometry of the LV cavity and provides a more accurate estimate of LV mass, size, and systolic function as compared with the traditionally recommended basal level.

SUBMITTER: Chetrit M

PROVIDER: S-EPMC7861507 | biostudies-literature | 2019 Apr

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Optimal Technique for Measurement of Linear Left Ventricular Dimensions.

Chetrit Michael M Roujol Sébastien S Picard Michael H MH Timmins Logan L Manning Warren J WJ Rudski Lawrence G LG Levine Robert A RA Afilalo Jonathan J

Journal of the American Society of Echocardiography : official publication of the American Society of Echocardiography 20190228 4

<h4>Introduction</h4>Echocardiographic assessment of the left ventricle (LV) begins with the measurement of linear dimensions that approximate its ellipsoid diameter. These linear dimensions have historically been measured at the basal level of the LV, which is not representative of its true diameter. The objective of this study was to determine the optimal level to measure LV cavity dimensions to more accurately estimate its size and mass.<h4>Methods</h4>The derivation study included 75 patient ...[more]

PMID: 30826223

Similar Datasets

Project description:Background Radiofrequency ablation of intramural ventricular substrate is often limited by insufficient tissue penetration despite high energy settings. As lesion dimensions have a direct and negative relationship to impedance, reducing the baseline impedance may increase the ablation effect on deep ventricular tissue. Methods This study included 16 patients with ventricular tachycardia or frequent ventricular premature complexes refractory to ablation with irrigated catheters. After a failed response to radiofrequency ablation, impedance was modulated by adding or repositioning return patches in an attempt to decrease the circuit impedance. Ablation was repeated at a similar location and power settings, and the effect on arrhythmia suppression and adverse effects were evaluated. Results Six patients with idiopathic ventricular premature complexes originating from the left ventricular summit (n=4) or papillary muscles (n=2), 6 patients with noninfarct related ventricular tachycardia and 4 patients with infarct-related ventricular tachycardia had unsuccessful response to radiofrequency ablation at critical sites (number of applications: 10.4±3.1, power: 42.3±2.9 W, duration: 55.3±25.5 seconds, impedance reduction: 14.6±3.5 Ω, low-ionic solution was used in 81.25%). Modulating the return patches resulted in reduced baseline impedance (111.7±8.2 versus 134.7±6.6 Ω, P<0.0001), increased current output (0.6±0.02 versus 0.56±0.02 Amp; P<0.0001) and greater impedance drop (16.8±3.0 Ω, P<0.001). Repeat ablation at similar locations had a successful effect in 12 out of 16 (75.0%) patients. During a follow-up duration of 13±5 months, 10 out of 12 (83.3%) patients remained free of arrhythmia recurrence. The frequency of steam pops was similar between the higher and lower baseline impedance settings (7.1 versus 8.2%; P=0.74). Conclusions In patients with deep ventricular substrate, reducing the baseline impedance is a simple, safe, and effective technique for increasing the effect of radiofrequency ablation. However, its combination with low-ionic solutions may increase the risk for steam pops and neurological events.

Dataset Information

Optimal Technique for Measurement of Linear Left Ventricular Dimensions.

Introduction

Methods

Results

Conclusions

Publications

Optimal Technique for Measurement of Linear Left Ventricular Dimensions.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets