Dataset Information

Reference evapotranspiration of Brazil modeled with machine learning techniques and remote sensing.

ABSTRACT: Reference evapotranspiration (ETo) is a fundamental parameter for hydrological studies and irrigation management. The Penman-Monteith method is the standard to estimate ETo and requires several meteorological elements. In developing countries, the number of weather stations is insufficient. Thus, free products of remote sensing with evapotranspiration information must be used for this purpose. In this context, the objective of this study was to estimate monthly ETo from potential evapotranspiration (PET) made available by MOD16 product. In this study, the monthly ETo estimated by Penman-Monteith method was considered as the standard. For this, data from 265 weather station of the National Institute of Meteorology (INMET), spread all over the Brazilian territory, were acquired for the period from 2000 to 2014 (15 years). For these months, monthly PET values from MOD16 product for all Brazil were also downloaded. By using machine learning algorithms and information from WorldClim as covariates, ETo was estimated through images from the MOD16 product. To perform the modeling of ETo, eight regression algorithms were tested: multiple linear regression; random forest; cubist; partial least squares; principal components regression; adaptive forward-backward greedy; generalized boosted regression and generalized linear model by likelihood-based boosting. Data from 2000 to 2012 (13 years) were used for training and data of 2013 and 2014 (2 years) were used to test the models. The PET made available by the MOD16 product showed higher values than those of ETo for different periods and climatic regions of Brazil. However, the MOD16 product showed good correlation with ETo, indicating that it can be used in ETo estimation. All models of machine learning were effective in improving the performance of the metrics evaluated. Cubist was the model that presented the best metrics for r2 (0.91), NSE (0.90) and nRMSE (8.54%) and should be preferred for ETo prediction. MOD16 product is recommended to be used to predict monthly ETo, which opens possibilities for its use in several other studies.

SUBMITTER: Dias SHB

PROVIDER: S-EPMC7872264 | biostudies-literature | 2021

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Reference evapotranspiration of Brazil modeled with machine learning techniques and remote sensing.

Dias Santos Henrique Brant SHB Filgueiras Roberto R Fernandes Filho Elpídio Inácio EI Arcanjo Gemima Santos GS Silva Gustavo Henrique da GHD Mantovani Everardo Chartuni EC Cunha Fernando França da FFD

PloS one 20210209 2

Reference evapotranspiration (ETo) is a fundamental parameter for hydrological studies and irrigation management. The Penman-Monteith method is the standard to estimate ETo and requires several meteorological elements. In developing countries, the number of weather stations is insufficient. Thus, free products of remote sensing with evapotranspiration information must be used for this purpose. In this context, the objective of this study was to estimate monthly ETo from potential evapotranspirat ...[more]

PMID: 33561147

Similar Datasets

Project description:Background:Above-ground biomass (AGB) is a basic agronomic parameter for field investigation and is frequently used to indicate crop growth status, the effects of agricultural management practices, and the ability to sequester carbon above and below ground. The conventional way to obtain AGB is to use destructive sampling methods that require manual harvesting of crops, weighing, and recording, which makes large-area, long-term measurements challenging and time consuming. However, with the diversity of platforms and sensors and the improvements in spatial and spectral resolution, remote sensing is now regarded as the best technical means for monitoring and estimating AGB over large areas. Results:In this study, we used structural and spectral information provided by remote sensing from an unmanned aerial vehicle (UAV) in combination with machine learning to estimate maize biomass. Of the 14 predictor variables, six were selected to create a model by using a recursive feature elimination algorithm. Four machine-learning regression algorithms (multiple linear regression, support vector machine, artificial neural network, and random forest) were evaluated and compared to create a suitable model, following which we tested whether the two sampling methods influence the training model. To estimate the AGB of maize, we propose an improved method for extracting plant height from UAV images and a volumetric indicator (i.e., BIOVP). The results show that (1) the random forest model gave the most balanced results, with low error and a high ratio of the explained variance for both the training set and the test set. (2) BIOVP can retain the largest strength effect on the AGB estimate in four different machine learning models by using importance analysis of predictors. (3) Comparing the plant heights calculated by the three methods with manual ground-based measurements shows that the proposed method increased the ratio of the explained variance and reduced errors. Conclusions:These results lead us to conclude that the combination of machine learning with UAV remote sensing is a promising alternative for estimating AGB. This work suggests that structural and spectral information can be considered simultaneously rather than separately when estimating biophysical crop parameters.

Project description:BACKGROUND:Diabetes Mellitus is an increasingly prevalent chronic disease characterized by the body's inability to metabolize glucose. The objective of this study was to build an effective predictive model with high sensitivity and selectivity to better identify Canadian patients at risk of having Diabetes Mellitus based on patient demographic data and the laboratory results during their visits to medical facilities. METHODS:Using the most recent records of 13,309 Canadian patients aged between 18 and 90 years, along with their laboratory information (age, sex, fasting blood glucose, body mass index, high-density lipoprotein, triglycerides, blood pressure, and low-density lipoprotein), we built predictive models using Logistic Regression and Gradient Boosting Machine (GBM) techniques. The area under the receiver operating characteristic curve (AROC) was used to evaluate the discriminatory capability of these models. We used the adjusted threshold method and the class weight method to improve sensitivity - the proportion of Diabetes Mellitus patients correctly predicted by the model. We also compared these models to other learning machine techniques such as Decision Tree and Random Forest. RESULTS:The AROC for the proposed GBM model is 84.7% with a sensitivity of 71.6% and the AROC for the proposed Logistic Regression model is 84.0% with a sensitivity of 73.4%. The GBM and Logistic Regression models perform better than the Random Forest and Decision Tree models. CONCLUSIONS:The ability of our model to predict patients with Diabetes using some commonly used lab results is high with satisfactory sensitivity. These models can be built into an online computer program to help physicians in predicting patients with future occurrence of diabetes and providing necessary preventive interventions. The model is developed and validated on the Canadian population which is more specific and powerful to apply on Canadian patients than existing models developed from US or other populations. Fasting blood glucose, body mass index, high-density lipoprotein, and triglycerides were the most important predictors in these models.

Dataset Information

Reference evapotranspiration of Brazil modeled with machine learning techniques and remote sensing.

Publications

Reference evapotranspiration of Brazil modeled with machine learning techniques and remote sensing.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets