Dataset Information

Three-dimensional shear wave elastography on conventional ultrasound scanners with external vibration.

ABSTRACT: Two-dimensional (2D) ultrasound shear wave elastography (SWE) has been widely used for soft tissue properties assessment. Given that shear waves propagate in three dimensions (3D), extending SWE from 2D to 3D is important for comprehensive and accurate stiffness measurement. However, implementation of 3D SWE on a conventional ultrasound scanner is challenging due to the low volume rate (tens of Hertz) associated with limited parallel receive capability of the scanner's hardware beamformer. Therefore, we developed an external mechanical vibration-based 3D SWE technique allowing robust 3D shear wave tracking and speed reconstruction for conventional scanners. The aliased shear wave signal detected with a sub-Nyquist sampling frequency was corrected by leveraging the cyclic nature of the sinusoidal shear wave generated by the external vibrator. Shear wave signals from different sub-volumes were aligned in temporal direction to correct time delays from sequential pulse-echo events, followed by 3D speed reconstruction using a 3D local frequency estimation algorithm. The technique was validated on liver fibrosis phantoms with different stiffness, showing good correlation (r = 0.99, p < 0.001) with values measured from a state-of-the-art SWE system (GE LOGIQ E9). The phantoms with different stiffnesses can be well-differentiated regardless of the external vibrator position, indicating the feasibility of the 3D SWE with regard to different shear wave propagation scenarios. Finally, shear wave speed calculated by the 3D method correlated well with magnetic resonance elastography performed on human liver (r = 0.93, p = 0.02), demonstrating the in vivo feasibility. The proposed technique relies on low volume rate imaging and can be implemented on the widely available clinical ultrasound scanners, facilitating its clinical translation to improve liver fibrosis evaluation.

SUBMITTER: Huang C

PROVIDER: S-EPMC7880611 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Similar Datasets

Project description:BackgroundThe histopathological classification of salivary gland tumors is extremely complex. The imaging manifestations of some tumors are nonspecific. It is particularly important to improve the value of ultrasound in the diagnosis of salivary gland tumors. This study aimed to analyze the diagnostic value of different parameters of shear wave elastography (SWE) in the quantitative diagnosis of salivary gland tumors, and to evaluate the value of SWE combined with conventional ultrasound.MethodsThe study was conducted retrospectively. Patients who underwent salivary gland tumor resection from April 2021 to November 2022 in the Ninth People's Hospital, Shanghai Jiaotong University School of Medicine were randomly recruited to the study. A total of 305 masses were divided into an elastography group (150 cases) and a control group (155 cases). The control group underwent conventional ultrasonography, whereas the elastography group underwent conventional ultrasonography and elastography. The Young's modulus E of the mass was quantitatively measured in the elastography group, including maximum cross-sectional area (S), maximum Young's modulus (Emax), mean Young's modulus (Emean), and Young's modulus standard deviation (SD). Pathologic diagnosis was used as the reference standard to determine the cut-off of shear wave elastography of salivary gland tumors, and the diagnostic performance of the 2 groups was compared.ResultsIn the elastography group, the diagnostic value of Emax·S (the product of the maximum Young's modulus of the mass and the maximum cross-sectional area of the mass) in the differential diagnosis of malignant tumors (MT) and non-malignant tumors (NMT) was the highest, with a sensitivity and specificity of 72.0% and 80.0%, respectively. The diagnostic value of Emax/D (the quotient of the maximum Young's modulus of the mass and the maximum diameter of the mass) in the differential diagnosis of pleomorphic adenoma (PA) and adenolymphoma (AL) was the highest, with a sensitivity and specificity of 62.3% and 82.4%, respectively. The receiver operating characteristic (ROC) curves for the diagnosis of salivary gland tumors were compared between the elastography group and the control group. The area under the curve (AUC) of the elastography group was 0.915, the sensitivity, specificity, and Youden index were 84.0%, 88.0%, and 0.720, respectively. The AUC of the control group was 0.906, the sensitivity, specificity, and Youden index were 76.0%, 90.0%, and 0.660, respectively, which is the main finding of the study.ConclusionsSWE can be used as a complementary method for the diagnosis of salivary gland tumors, which has certain value in improving the diagnostic performance. As a result, the sensitivity is improved but the specificity is worsened by addition of SWE to B-mode ultrasound and color Doppler flow imaging (CDFI).

Project description:Background and aimsWe investigated the usefulness of combining two-dimensional shear wave elastography and the ultrasound-guided attenuation parameter for assessing the risk of progressive non-alcoholic steatohepatitis, defined as non-alcoholic steatohepatitis with a non-alcoholic fatty liver disease activity score of ≥4 and a fibrosis stage of ≥2.MethodsThis prospective study included 202 patients with non-alcoholic fatty liver disease who underwent two-dimensional shear wave elastography, ultrasound-guided attenuation parameter, vibration-controlled transient elastography, the controlled attenuation parameter, and liver biopsy on the same day. Patients were grouped according to liver stiffness measurement using two-dimensional shear wave elastography and the attenuation coefficient, assessed using the ultrasound-guided attenuation parameter: A, low liver stiffness measurement/low attenuation coefficient; B, low liver stiffness measurement/high attenuation coefficient; C, high liver stiffness measurement/low attenuation coefficient; and D, high liver stiffness measurement/high attenuation coefficient.ResultsTwo-dimensional shear wave elastography and vibration-controlled transient elastography had equivalent diagnostic performance for fibrosis. The areas under the curve of the ultrasound-guided attenuation parameter for identifying steatosis grades ≥S1, ≥S2, and S3 were 0.89, 0.91, and 0.92, respectively, which were significantly better than those of the controlled attenuation parameter (P<0.05). The percentages of progressive non-alcoholic steatohepatitis in Groups A, B, C, and D were 0.0%, 7.7%, 35.7%, and 50.0%, respectively (P<0.001). The prediction model was established as logit (p) = 0.5414 × liver stiffness measurement (kPa) + 7.791 × attenuation coefficient (dB/cm/MHz)-8.401, with area under the receiver operating characteristic curve, sensitivity, and specificity values of 0.832, 80.9%, and 74.6%, respectively; there was no significant difference from the FibroScan-aspartate aminotransferase score.ConclusionCombined assessment by two-dimensional shear wave elastography and the ultrasound-guided attenuation parameter is useful for risk stratification of progressive non-alcoholic steatohepatitis and may be convenient for evaluating the necessity of specialist referral and liver biopsy.

Project description:Thromboembolism in a cerebral blood vessel is associated with high morbidity and mortality. Mechanical thrombectomy (MT) is one of the emergenc proceduresperformed to remove emboli. However, the interventional approaches such as aspiration catheters or stent retriever are empirically selected. An inappropriate selection of surgical devices can influence the success rate during embolectomy, which can lead to an increase in brain damage. There has been growing interest in the study of clot composition and using a priori knowledge of clot composition to provide guidance for an appropriate treatment strategy for interventional physicians. Developing imaging tools which can allow interventionalists to understand clot composition could affect management and device strategy. In this study, we investigated how clots of different compositions can be characterized by using acoustic radiation force optical coherence elastography (ARF-OCE) and compared with ultrasound shear wave elastography (SWE). Five different clots compositions using human blood were fabricated into cylindrical forms from fibrin-rich (21% red blood cells, RBCs) to RBC-rich (95% RBCs). Using the ARF-OCE and SWE, we characterized the wave velocities measured in the time-domain. In addition, the semi-analytical finite element model was used to explore the relationship between the phase velocities with various frequency ranges and diameters of the clots. The study demonstrated that the wave group velocities generally decrease as RBC content increases in ARF-OCE and SWE. The correlation of the group velocities from the OCE and SWE methods represented a good agreement as RBC composition is larger than 39%. Using the phase velocity dispersion analysis applied to ARF-OCE data, we estimated the shear wave velocities decoupling the effects of the geometry and material properties of the clots. The study demonstrated that the composition of the clots can be characterized by elastographic methods using ARF-OCE and SWE, and OCE demonstrated better ability to discriminate between clots of different RBC compositions, compared to the ultrasound-based approach, especially in clots with low RBC compositions.

Dataset Information

Three-dimensional shear wave elastography on conventional ultrasound scanners with external vibration.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets