Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Parameter adaptive terminal sliding mode control for Full-Bridge DC-DC converter.

ABSTRACT: The poor dynamic performance problem of a Full-Bridge converter under a traditional control strategy is investigated in this study. A new parameter adaptive terminal sliding mode control policy is developed for a Full-Bridge DC-DC converter, by combining the integral part with the power function and differential function in the design of the sliding surface. In theory, the steady-state error of the system can approach zero within a short time. To manage the un-ideal situation after using a fixed value of power ?, an improved ? adaptive algorithm is proposed. The system output is tracked and ? is adjusted in real time. The effect of the system can be guaranteed always in an optimal state. Finally, simulation results are provided to verify the performance of the proposed design method under different conditions.

SUBMITTER: Zhou K

PROVIDER: S-EPMC7906401 | biostudies-literature | 2021

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Parameter adaptive terminal sliding mode control for Full-Bridge DC-DC converter.

Zhou Kai K Yuan Chengxiang C Sun Dongyang D Jin Ningzhi N Wu Xiaogang X

PloS one 20210225 2

The poor dynamic performance problem of a Full-Bridge converter under a traditional control strategy is investigated in this study. A new parameter adaptive terminal sliding mode control policy is developed for a Full-Bridge DC-DC converter, by combining the integral part with the power function and differential function in the design of the sliding surface. In theory, the steady-state error of the system can approach zero within a short time. To manage the un-ideal situation after using a fixed ...[more]

PMID: 33630901

Similar Datasets

High-performance fractional order terminal sliding mode control strategy for DC-DC Buck converter.

Project description:This paper presents an adaption of the fractional order terminal sliding mode control (AFTSMC) strategy for DC-DC Buck converter. The following strategy aims to design a novel nonlinear sliding surface function, with a double closed-loop structure of voltage and current. This strategy is a fusion of two characteristics: terminal sliding mode control (TSMC) and fractional order calculation (FOC). In addition, the influence of "the controller parameters" on the "performance of double closed-loop system" is investigated. It is observed that the value of terminal power has to be chosen to make a compromise between start-up and transient response of the converter. Therefore the AFTSMC strategy chooses the value of the terminal power adaptively, and this strategy can lead to the appropriate number of fractional order as well. Furthermore, through the fractional order analysis, the system can reach the sliding mode surface in a finite time. And the theoretical considerations are verified by numerical simulation. The performance of the AFTSMC and TSMC strategies is tested by computer simulations. And the comparison simulation results show that the AFTSMC exhibits a considerable improvement in terms of a faster output voltage response during load changes. Moreover, AFTSMC obtains a faster dynamical response, smaller steady-state error rate and lower overshoot.

| S-EPMC5662226 | biostudies-literature

Full-order adaptive sliding mode control with extended state observer for high-speed PMSM speed regulation.

Project description:In order to achieve speed control of high-speed permanent magnet synchronous motor with high precision, the sliding mode control (SMC) is usually adopted. However, the inherent chattering phenomenon affects the speed control performance. In order to solve this problem, a composite speed regulator is proposed in this paper, which is made up of two parts: the adaptive full-order SMC and extended state observer (ESO). Switching gain adaption law is proposed for minimizing chattering as much as possible while ensuring the robustness of sliding mode control. The total disturbance is estimated by the ESO and through feedforward, thus improving the system anti-disturbance ability. Finally, the effectiveness of the proposed speed regulator has been validated in the test bench.

| S-EPMC10110560 | biostudies-literature

An improved large signal model of full-bridge LLC converter.

Project description:For the full-bridge LLC converter, it is necessary to establish a large signal model with low-complexity and high-precision when the current of filter inductor works under the continuous conduction mode (CCM) situation. In terms of low complexity, peak values of resonant state variables and average values of slow state variables are taken as the measured indexes between models and actual converter. Models based on the first harmonic approximation (FHA) are studied in depth because they have lower complexity than the existing models. From prospective of high precision, deficiencies of typical FHA model are explained in the light of harmonic generation mechanism of primary current and influence of Fourier series on the typical equivalent circuit. Therefore, transient process of each metallic oxide semiconductor field effect transistor (MOSFET) and its related fast recovery diode, transient process of Schottky rectifier diodes, piecewise equivalent circuit, appropriate selection of variables, and simplified modified dynamic equations are all considered. Furthermore, the unified proposed model is achieved according to the equivalent principle of indexes between aforementioned improved analyses and proposed model. Numerical results of typical FHA model and proposed model are given in accordance with the key indexes. Then, corresponding experimental results are also presented. Differences of indexes between the two models and the actual converter are compared respectively. Though complexity of proposed model is the same as that of typical FHA model, precision of proposed model is higher than that of typical FHA model.

| S-EPMC6195276 | biostudies-literature

Design and analysis of adaptive Super-Twisting sliding mode control for a microgyroscope.

Project description:This paper proposes a novel adaptive Super-Twisting sliding mode control for a microgyroscope under unknown model uncertainties and external disturbances. In order to improve the convergence rate of reaching the sliding surface and the accuracy of regulating and trajectory tracking, a high order Super-Twisting sliding mode control strategy is employed, which not only can combine the advantages of the traditional sliding mode control with the Super-Twisting sliding mode control, but also guarantee that the designed control system can reach the sliding surface and equilibrium point in a shorter finite time from any initial state and avoid chattering problems. In consideration of unknown parameters of micro gyroscope system, an adaptive algorithm based on Lyapunov stability theory is designed to estimate the unknown parameters and angular velocity of microgyroscope. Finally, the effectiveness of the proposed scheme is demonstrated by simulation results. The comparative study between adaptive Super-Twisting sliding mode control and conventional sliding mode control demonstrate the superiority of the proposed method.

| S-EPMC5751982 | biostudies-literature

An improved power loss model of full-bridge converter under light load condition.

Project description:When the full-bridge converter works under the light load condition, the power efficiency obtained by the theoretical model is much different from that of the actual converter. Facing with this situation, an improved power loss model based on the typical power loss model is proposed. In this paper, the typical power loss model is called typical model for short and the improved power loss model is called proposed model for short. Firstly, the antiparallel freewheeling diodes at the arms of full-bridge circuit are taken into account. Every barrier junction capacitance of Schottky diode in the rectifier circuit is neglected. Then, the turning-off loss of full-bridge and the core loss of inductive components (the transformer and the filter inductor) in the typical model are compensated and modified by combining the theoretical values with the measured input current under the minimum and the maximum output current. In addition, it also corrects the equivalent resistance related to the conduction loss of converter. Eventually, the proposed model is established. The rise time and fall time of the midpoint voltage of two arms, and the fluctuation degree of the reverse bias voltage related to the Schottky rectifier diodes are regarded as the local indexes. The conduction time of the metal oxide semiconductor field effect transistor (MOSFET) in each switching period, and the power efficiency of converter are regarded as the global indexes. Based on the analyses, the local indexes are compared qualitatively, while the global indexes are compared quantitatively. It is found that the differences of the local indexes between the proposed model and the experiment are smaller than those between the typical model and the experiment. Meanwhile, the global indexes of the proposed model are closer to the experimental results. Therefore, it can be further demonstrated that the proposed model is more approximate to the actual converter than the typical model.

| S-EPMC6283570 | biostudies-literature

Parameter adaptive sliding mode trajectory tracking strategy with initial value identification for the swing in a hydraulic construction robot.

Project description:A novel trajectory tracking strategy is developed for a double actuated swing in a hydraulic construction robot. Specifically, a nonlinear hydraulic dynamics model of a double actuated swing is established, and a parameter adaptive sliding mode control strategy is designed to enhance the trajectory tracking performance. When an object is grabbed and unloaded, the moment of inertia of a swing considerably changes, and the performance of the estimation algorithm is generally inadequate. Thus, it is necessary to establish an algorithm to identify the initial value of the moment of inertia of the object. To this end, this paper proposes a novel initial value identification algorithm based on a two-DOF robot gravity force identification method combined with stereo vision information. The performance of the identification algorithm is enhanced. Simulations and experiments are performed to verify the effect of the novel control scheme.

| S-EPMC10090183 | biostudies-literature

Sensorless load torque estimation and passivity based control of buck converter fed DC motor.

Project description:Passivity based control of DC motor in sensorless configuration is proposed in this paper. Exact tracking error dynamics passive output feedback control is used for stabilizing the speed of Buck converter fed DC motor under various load torques such as constant type, fan type, propeller type, and unknown load torques. Under load conditions, sensorless online algebraic approach is proposed, and it is compared with sensorless reduced order observer approach. The former produces better response in estimating the load torque. Sensitivity analysis is also performed to select the appropriate control variables. Simulation and experimental results fully confirm the superiority of the proposed approach suggested in this paper.

| S-EPMC4393902 | biostudies-other

Performance analysis of PID controller and fuzzy logic controller for DC-DC boost converter.

Project description:Demand of Power electronics converter is increased due to the rapid increase of green re-sources. The distributed nature of uncontrolled renewable energy resources are connected with the grid via power electronics converter. DC-DC converters are high-frequency current conversion circuits that use transformers, inductors, and capacitors to smooth switching noise into regulated DC voltages. In this study, a comparative performance analysis of Proportional integral Derivative (PID) and fuzzy logic controller (FLC) for DC-DC Boost Converter is presented. PID-based controller for dynamic boosting of DC-DC boost converter was replaced by Fuzzy Inference system (FIS) to study the system behavior. Five different membership functions were performed to observe the response of the system for DC -DC boost converter with FIS controller. The performances of FIS-based controller and PID-based controller for DC-DC boost converter were compared in detail. Also, the proposed techniques for the switching mode of DC-DC converter have been applied. The performance analysis of both PID and fuzzy controller was simulated using MAT LAB. The results of FIS based approach are better than PID based controller in terms of transient responses.

| S-EPMC10586690 | biostudies-literature

Adaptive fuzzy sliding control of single-phase PV grid-connected inverter.

Project description:In this paper, an adaptive fuzzy sliding mode controller is proposed to control a two-stage single-phase photovoltaic (PV) grid-connected inverter. Two key technologies are discussed in the presented PV system. An incremental conductance method with adaptive step is adopted to track the maximum power point (MPP) by controlling the duty cycle of the controllable power switch of the boost DC-DC converter. An adaptive fuzzy sliding mode controller with an integral sliding surface is developed for the grid-connected inverter where a fuzzy system is used to approach the upper bound of the system nonlinearities. The proposed strategy has strong robustness for the sliding mode control can be designed independently and disturbances can be adaptively compensated. Simulation results of a PV grid-connected system verify the effectiveness of the proposed method, demonstrating the satisfactory robustness and performance.

| S-EPMC5552357 | biostudies-literature

Smooth super-twisting sliding mode control for the class of underactuated systems.

Project description:In this article, Smooth Super-twisting Sliding Mode Control (SSTWSMC) is investigated for the class of underactuated system. In underactuated systems, the control design is not directly applicable as for other systems (known as fully actuated systems). Therefore, at initial step, a nonlinear uncertain model of systems is transformed into the controllable canonical form, and then Smooth Super Twisting (SSTW) based Sliding Mode Control (SMC) is devised for the control design purpose for the considered class. In addition, closed loop stability of the proposed technique is presented in a fascinating way. The effectiveness and supremacy of the proposed control technique is proven by extensive analysis between conventional Sliding Mode Control (SMC), Super twisting (STW) sliding mode control and Smooth Super-twisting Sliding Mode Control (SSTWSMC). The comprehensive analysis evaluates the attributes like robustness enhancement, settling time, control effort, chattering reduction, overshoot, sliding mode convergence, etc. and is supported by simulations as well as practical implementation on ball and beam balancer (which is considered as application example).

| S-EPMC6169871 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data