Dataset Information

Accumulation of airborne microplastics in lichens from a landfill dumping site (Italy).

ABSTRACT: The aim of this study was to assess if lichens (Flavoparmelia caperata) surrounding a landfill dumping site in Italy accumulated higher amounts of microplastics compared with lichens at more distant sites. Lichen samples were collected at three sites along a transect from the landfill: close (directly facing the landfill), intermediate (200 m), and remote (1500 m). Anthropogenic microparticles (fibres and fragments) were determined visually after wet peroxide digestion of the samples, and microplastics were identified based on a hot needle test; the type of plastic was identified by micro-Raman analysis. The results showed that lichens collected in the vicinity of the landfill accumulated the highest number of anthropogenic microfibres and fragments (147 mp/g dw), and consequently microplastics (79 mp/g dw), suggesting that the impact of landfill emissions is spatially limited. The proportion of fibres and fragments identified as microplastics was 40% across all sites and the most abundant polymer type was polyester or polyethylene terephthalate (68%). These results clearly indicated that lichens can effectively be used to monitor the deposition of microplastics.

SUBMITTER: Loppi S

PROVIDER: S-EPMC7907242 | biostudies-literature | 2021 Feb

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Accumulation of airborne microplastics in lichens from a landfill dumping site (Italy).

Loppi Stefano S Roblin Brett B Paoli Luca L Aherne Julian J

Scientific reports 20210225 1

The aim of this study was to assess if lichens (Flavoparmelia caperata) surrounding a landfill dumping site in Italy accumulated higher amounts of microplastics compared with lichens at more distant sites. Lichen samples were collected at three sites along a transect from the landfill: close (directly facing the landfill), intermediate (200 m), and remote (1500 m). Anthropogenic microparticles (fibres and fragments) were determined visually after wet peroxide digestion of the samples, and microp ...[more]

PMID: 33633254

Similar Datasets

Project description:In cooperation with the U.S. Environmental Protection Agency (EPA), the U.S. Geological Survey (USGS) collected numerous types of geophysical data at a site in Fredericktown, Missouri, in June 2018. Various geophysical surveys were collectively used to help evaluate the overall suitability of the site for use as a mine waste-soil and sediment repository, and to evaluate the suite of geophysical methods for rapid collection and preliminary assessment of sites with shallow sediments. Land-based geophysical methods, which included frequency-domain electromagnetic induction (FDEM), electrical resistivity tomography (ERT), horizontal-to-vertical spectral ratio passive seismic (HVSR), and shear-wave refraction, were used to determine the depths to crystalline bedrock and characterize the overlying unconsolidated sediments (or regolith). Water-borne FDEM profiles and forward-looking infrared (FLIR) thermal image surveys were conducted along the Fredericktown City Lake shoreline to identify locations of potential interactions between groundwater and surface water. Sediment temperature profilers were installed at two locations along the shoreline to characterize shallow unconsolidated sediment thermal properties and support the interpretation of the other geophysical surveys. Geophysical reconnaissance methods including the FDEM and HVSR methods, were used to rapidly evaluate the vertical and lateral extent of overburden, or unconsolidated sediments, overlying the bedrock at the site. The results of these methods were compared to reference geophysical methods of ERT and shear-wave refraction surveys that have greater accuracy and are more labor intensive and time-consuming. A goal of the project was the evaluation of the validity and reliability of this suite of reconnaissance geophysical methods as a means by which shallow (less than 3 meters (m)) sediments can be rapidly assessed. Two orthogonal ERT survey profiles, which used 28 electrodes spaced 1 m apart in dipole-dipole and combined Wenner-Schlumberger configurations, were collected to determine the subsurface resistivity. The results were inverted to produce electrical resistivity profiles that were compared to the FDEM and HVSR survey results. The FDEM data were collected along cleared paths through the proposed disposal cell locations. The data were inverted to generate depth-dependent estimates of electrical conductivity along the transects. An analysis of the depth of investigation (DOI) indicated the FDEM imaged to depths of about 3 m below land surface. The ERT, FDEM, and HVSR indicated the depth to crystalline bedrock was approximately 1.5 m below land surface with shallower and deeper areas. Results from this investigation indicate this suite of methods will likely perform well at sites with shallow depths to bedrock and strong conductivity and acoustic impedance contrasts, where the FDEM and HVSR methods can provide estimates of the depth to bedrock, and ERT and shear-wave refraction surveys might not be worth the added time and expense.

Dataset Information

Accumulation of airborne microplastics in lichens from a landfill dumping site (Italy).

Publications

Accumulation of airborne microplastics in lichens from a landfill dumping site (Italy).

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets