Dataset Information

Solvothermal Synthesis Combined with Design of Experiments-Optimization Approach for Magnetite Nanocrystal Clusters.

ABSTRACT: Magnetite nanocrystal clusters are being investigated for their potential applications in catalysis, magnetic separation, and drug delivery. Controlling their size and size distribution is of paramount importance and often requires tedious trial-and-error experimentation to determine the optimal conditions necessary to synthesize clusters with the desired properties. In this work, magnetite nanocrystal clusters were prepared via a one-pot solvothermal reaction, starting from an available protocol. In order to optimize the experimental factors controlling their synthesis, response surface methodology (RSM) was used. The size of nanocrystal clusters can be varied by changing the amount of stabilizer (tribasic sodium citrate) and the solvent ratio (diethylene glycol/ethylene glycol). Tuning the experimental conditions during the optimization process is often limited to changing one factor at a time, while the experimental design allows for variation of the factors' levels simultaneously. The efficiency of the design to achieve maximum refinement for the independent variables (stabilizer amount, diethylene glycol/ethylene glycol (DEG/EG) ratio) towards the best conditions for spherical magnetite nanocrystal clusters with desirable size (measured by scanning electron microscopy and dynamic light scattering) and narrow size distribution as responses were proven and tested. The optimization procedure based on the RSM was then used in reverse mode to determine the factors from the knowledge of the response to predict the optimal synthesis conditions required to obtain a good size and size distribution. The RSM model was validated using a plethora of statistical methods. The design can facilitate the optimization procedure by overcoming the trial-and-error process with a systematic model-guided approach.

SUBMITTER: Medinger J

PROVIDER: S-EPMC7912753 | biostudies-literature | 2021 Feb

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Solvothermal Synthesis Combined with Design of Experiments-Optimization Approach for Magnetite Nanocrystal Clusters.

Medinger Joelle J Nedyalkova Miroslava M Lattuada Marco M

Nanomaterials (Basel, Switzerland) 20210201 2

Magnetite nanocrystal clusters are being investigated for their potential applications in catalysis, magnetic separation, and drug delivery. Controlling their size and size distribution is of paramount importance and often requires tedious trial-and-error experimentation to determine the optimal conditions necessary to synthesize clusters with the desired properties. In this work, magnetite nanocrystal clusters were prepared via a one-pot solvothermal reaction, starting from an available protoco ...[more]

PMID: 33535568

Similar Datasets

Project description:Realization of graphene-based sensors and electronic devices remains challenging, in part due to integration challenges with current fabrication and manufacturing processes. Thus, scalable methods for in situ fabrication of high-quality graphene-like materials are essential. Low-cost CO2 laser engravers can be used for site-selective conversion of polyimide under ambient conditions to create 3-D, rotationally disordered, few-layer, porous, graphene-like electrodes. However, the influences of non-linear parameter terms and interactions between key parameters on the graphitization process present challenges for rapid, resource-efficient optimization. An iterative optimization strategy was developed to identify promising regions in parameter space for two key parameters, laser power and scan speed, with the goal of optimizing electrode performance while maximizing scan speed and hence fabrication throughput. The strategy employed iterations of Design of Experiments Response Surface (DoE-RS) methods combined with choices of readily measurable parameters to minimize measurement resources and time. The initial DoE-RS experiment set employed visual response parameters, while subsequent iterations used sheet resistance as the optimization parameter. The final model clearly demonstrates that laser graphitization through raster scanning is a highly non-linear process requiring polynomial terms in scan speed and laser power up to fifth order. Two regions of interest in parameter space were identified using this strategy: Region 1 represents the global minimum for sheet resistance for this laser (∼16 Ω/sq), found at a low scan speed (70 mm/s) and a low average power (2.1 W) . Region 2 is a local minimum for sheet resistance (36 Ω/sq), found at higher values for scan speed (340 mm/s) and average power (3.4 W), allowing ∼5-fold reduction in write time. Importantly, these minima do not correspond to constant ratios of average laser power to scan speed. This highlights the benefits of DoE-RS methods in rapid identification of optimum parameter combinations that would be difficult to discover using traditional one-factor-at-a-time optimization. Verification data from Raman spectroscopy showed sharp 2D peaks with mean full-width-at-half-maximum intensity values <80 cm-1 for both regions, consistent with high-quality 3D graphene-like carbon. Graphene-based electrodes fabricated using the parameters from the respective regions yielded similar performance when employed as capacitive humidity sensors with hygroscopic dielectric layers. Devices fabricated using Region 1 parameters (16 Ω/sq) yielded capacitance responses of 0.78 ± 0.04 pF at 0% relative humidity (RH), increasing to 31 ± 7 pF at 85.1% RH. Region 2 devices (36 Ω/sq) showed comparable responses (0.88 ± 0.04 pF at 0% RH, 28 ± 5 pF at 85.1% RH).

Dataset Information

Solvothermal Synthesis Combined with Design of Experiments-Optimization Approach for Magnetite Nanocrystal Clusters.

Publications

Solvothermal Synthesis Combined with Design of Experiments-Optimization Approach for Magnetite Nanocrystal Clusters.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets