Browse
Submit Data
Databases
API
Help

Dataset Information

26 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Minimally Invasive High Tibial Osteotomy Using a Patient-Specific Cutting Guide.

ABSTRACT: Medial opening wedge high tibial osteotomy (OW-HTO) is an excellent surgical option for patients with varus knee osteoarthritis. This article presents a technique of performing a minimally invasive OW-HTO using a patient-specific cutting guide (PSCG). Preoperative 3-dimensional planning with computed tomography imaging is essential. The correction parameters, the final plate position, as well as the 3-dimensional position of the hinge as well as wedge are verified preoperatively before the PSCG is produced. After exposure with an oblique incision over the posteromedial tibia, the hamstring tendons are released for later re-attachment and the medial collateral ligament is released slightly. The PSCG is then used to perform the OW-HTO with protection of the posterior neurovascular structures by a retractor placed posterior to the medial collateral ligament. The final fixation of the osteotomy is achieved with a low-profile locking plate and a femoral head allograft wedge.

SUBMITTER: Bin Abd Razak HR

PROVIDER: S-EPMC7917192 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Three-Dimensional Patient Specific Instrumentation and Cutting Guide for Medial Closing Wedge High Tibial Osteotomy to Correct Valgus Malalignment.

Project description:Achievement of appropriate mechanical knee alignment is crucial to ensure optimal clinical outcomes following osteotomy procedures about the knee. The use of patient-specific instrumentation (PSI) to assist in preoperative planning and intraoperative realignment has gained increasing popularity. The purpose of this article is to describe a surgical technique involving a medial closing wedge high tibial osteotomy performed using three-dimensional (3D) PSI and cutting guide to revise residual valgus deformity following failed distal femoral osteotomy. The correction angle, 3D position of the hinge and wedge, as well as final plate and screw position are planned preoperatively using virtual software and computed tomography imaging to allow precise surgical execution.

| S-EPMC8807722 | biostudies-literature

Total Knee Arthroplasty with Concomitant Corrective Tibial Osteotomy Using Patient-Specific Instrumentation and Computed Tomography-Based Navigation in Severe Post-High Tibial Osteotomy Valgus Collapse.

Project description:We report the case of a 78-year-old woman with lateral knee osteoarthritis and severe valgus knee deformity after high tibial osteotomy. The patient's severe valgus tibial deformity with a valgus angle of 45° was evaluated using a 3-dimensional bone model, and a closing-wedge osteotomy was planned. Combined total knee arthroplasty and closing-wedge tibial osteotomy were performed using patient-specific instrumentation and a computed tomography-based navigation system. A semiconstrained total knee system with a long stem was implanted for fixation of the osteotomy site in the tibia. The patient was able to walk without pain 2 years postoperatively. The Knee Society Score improved from 13 to 73 points, and the functional score improved from 30 to 65 points. This preoperative planning method and the treatment procedure would be beneficial for clinical decision-making and treatment of severe valgus knee deformities.

| S-EPMC7476213 | biostudies-literature

Open-Wedge High Tibial Osteotomy Using a Protective Cutting System: Technical Advancement for the Accuracy of the Osteotomy and Avoiding Intraoperative Complications.

Project description:Open-wedge high tibial osteotomy for medial unicompartmental arthritis of the knee joint is a successful treatment option but is associated with potential intraoperative complications such as tibial plateau fracture, dislocation of the osteotomy hinge, under- or over-correction of the posterior slope, and neurovascular injury. Therefore we devised a protective cutting system and describe our method for the prevention of these complications. The potential advantages of this system are protection of the posterior neurovascular structures using a curved protector, bone cutting along the natural tibial slope using a superior surface aligning with the natural tibial slope, and complete 1-plane sawing of the posterior wall before the lateral hinge.

| S-EPMC4809661 | biostudies-literature

Posteromedial Opening-Wedge Tibial Osteotomy for Metaphyseal Varus and Abnormal Posterior Slope Correction in Failed Anterior Cruciate Ligament Reconstructions Using a Custom Cutting Guide.

Project description:Anterior cruciate ligament reconstruction after graft failure may need associated bone correction to ensure stability of the knee. This article presents a technique of posteromedial opening-wedge osteotomy using a custom cutting guide to correct increased tibial slope and metaphyseal varus deformity after recurrent graft failure. An autograft quadriceps tendon graft was selected for the revision anterior cruciate ligament graft. After exposure with an anteromedial incision a patient specific cutting guide was used to make the high tibial osteotomy. The final fixation of the posteromedial opening was achieved using a low-profile locking plate and a femoral head allograft bone wedge. The tibial tunnel was planned and included in the patient-specific cutting guide. The femoral tunnel was placed using an outside to in manner. Bioabsorbable screws were used as fixation devices.

| S-EPMC7451726 | biostudies-literature

A Right Angle Guide for Distal Tuberosity Osteotomy With Medial Open Wedge High Tibial Osteotomy for Varus Knee Osteoarthritis.

Project description:Medial open wedge high tibial osteotomy (OWHTO) is usually performed with proximal tuberosity osteotomy or setting the osteotomy line proximal to the tuberosity. However, OWHTO can result in patellofemoral complications due to postoperative patella infera. A new OWHTO technique, biplanar osteotomy with a distal tuberosity osteotomy, was reported in 2004 to prevent postoperative patella infera. To ensure that the 2 osteotomy lines maintain perpendicular, we describe the OWHTO procedure with a distal tuberosity osteotomy technique using a TriS Medial HTO Plate System (Olympus Terumo Biomaterials Corp., Tokyo, Japan) and a right angle guide we developed. In this Technical Note, we describe the procedure and advantages, risks, and limitations, as well as the pearls and pitfalls based on our experience.

| S-EPMC8084846 | biostudies-literature

Midterm Results Following Minimally Invasive Distal Chevron Osteotomy: Comparison With the Minimally Invasive Reverdin-Isham Osteotomy by Means of Meta-analysis.

Project description:Background/aimTo date, multiple different surgical techniques have been established for hallux valgus surgery, with each technique having its unique advantages and limitations. The open distal chevron osteotomy is widely accepted, but increasing patient demands have led several minimally invasive (MIS) techniques to be described in recent years. The aim of this study was to compare outcomes after minimally invasive (MIS) distal chevron osteotomy and the minimally invasive Reverdin-Isham method.Patients and methodsWe assessed clinical and radiographic outcomes after MIS chevron osteotomy in 57 feet of 49 consecutive patients with a mean follow-up of 58.9 (range=39.0-85.4) months. Outcomes after MIS Reverdin-Isham osteotomy were analyzed by means of a systematic literature review with a minimum follow-up of 6 months.ResultsRadiographic outcomes were significantly better in the MIS chevron cohort for intermetatarsal angle (p<0.001), hallux valgus angle and distal metacarpal articular angle (p<0.05). Concerning clinical outcomes, both methods provided comparable improvement.ConclusionMIS distal chevron osteotomy in mild to moderate hallux valgus deformity correction results in superior radiographic outcomes compared to the MIS Reverdin-Isham osteotomy. Sufficient correction of IMA cannot be achieved with the MIS Reverdin-Isham osteotomy.

| S-EPMC8286526 | biostudies-literature

Opening gap width influences distal tibial rotation below the osteotomy site following open wedge high tibial osteotomy.

Project description:PURPOSE:Although rotation of the distal portion of the tibia below the osteotomy site is considered an inevitable change in the axial plane in open wedge high tibial osteotomy (HTO), several studies on this issue have shown contradictory results. The purpose of this study was, therefore, to determine the direction and amount of distal tibial rotation following open wedge HTO using a three-dimensional reconstructed model. METHODS:This study involved 41 patients (42 knees) undergoing open wedge HTO for primary medial osteoarthritis. Distal tibial rotation was measured on the overlaid tibial plateau of a preoperative and postoperative 3-dimensional reconstructed model based on computed tomography. RESULTS:The mean distal tibial external rotation was 2.7° ± 2.3° (range, -0.9° to 9.9°), and the opening gap was larger in the group with > 3° distal tibial rotation than in the group with ? 3° distal tibial rotation (11.4 mm vs. 9.6 mm, P = 0.027). Multiple regression analysis showed that the opening gap was the only predictor of distal tibial rotation. On receiver operating characteristics analysis, an opening gap of 10 mm was found to be the optimal cutoff value for achieving greater than 3° of distal tibial rotation. CONCLUSIONS:Following medial opening wedge HTO, the distal tibial portion below the osteotomy site rotated approximately 3° externally. The magnitude of the external rotation of the distal tibia was affected by the opening gap width.

| S-EPMC6964860 | biostudies-literature

Development and ex-vivo assessment of a novel patient specific guide and instrumentation system for minimally invasive total shoulder arthroplasty.

Project description:ObjectiveTo develop and assess a novel guidance technique and instrumentation system for minimally invasive short-stemmed total shoulder arthroplasty that will help to reduce the complications associated with traditional open replacement such as poor muscle healing and neurovascular injury. We have answered key questions about the developed system including (1) can novel patient-specific guides be accurately registered and used within a minimally invasive environment?; (2) can accuracy similar to traditional techniques be achieved?MethodsA novel intra-articular patient-specific guide was developed for use with a new minimally invasive posterior surgical approach that guides bone preparation without requiring muscle resection or joint dislocation. Additionally, a novel set of instruments were developed to enable bone preparation within the minimally invasive environment. The full procedure was evaluated in six cadaveric shoulders, using digitizations to assess accuracy of each step.ResultsPatient-specific guide registration accuracy in 3D translation was 2.2±1.2mm (RMSE±1 SD; p = 0.007) for the humeral component and 2.7±0.7mm (p<0.001) for the scapula component. Final implantation accuracy was 2.9±3.0mm (p = 0.066) in translation and 5.7-6.8±2.2-4.0° (0.001<p<0.009) across the humerus implants' three rotations. Similarly, the glenoid component's implantation accuracy was 3.0±1.7mm (p = 0.008) in translation and 2.3-4.3±2.2-4.4° (0.008<p<0.09) in rotation.ConclusionThis system achieves minimally invasive shoulder replacement with accuracy similar to traditional open techniques while avoiding common causes of complications.SignificanceThis novel technique could lead to a paradigm shift in shoulder arthroplasty for patients with moderate arthritis, which could significantly improve rehabilitation and functional outcomes.

| S-EPMC8139503 | biostudies-literature

Arthroscopic and computer-assisted high tibial osteotomy using standard total knee arthroplasty navigation software.

Project description:Opening-wedge high tibial osteotomy is an increasingly performed procedure for treatment of varus gonarthrosis and correction of malalignment during meniscal transplantation or cartilage restoration. Precise preoperative planning and meticulous surgical technique are required to achieve an appropriate mechanical axis correction. We describe our technique of arthroscopic and computer-assisted high tibial osteotomy using commonly available total knee arthroplasty navigation software as an intraoperative goniometer. We believe that our technique, by providing intraoperative real-time guidance of the degree of correction that is accurate and reliable, represents a useful tool for the surgeon who uncommonly performs high tibial osteotomy.

| S-EPMC3716232 | biostudies-literature

Patient Characteristics Related to Blood Loss in High Tibial Osteotomy in Novel Multiple Linear Regression Analysis.

Project description:The purpose of the study was to identify patient characteristics related to blood loss following high tibial osteotomy (HTO). We evaluated 48 patients undergoing HTO from August 2018 to August 2019. The data of 48 patients were collected, including gender, age, height, weight, body mass index (BMI), smoking, alcohol consumption, hypertension, diabetes, history of aspirin, and pre-postoperative hematocrit (Hct). Multiple linear regression analysis was used to analyze the risk factors related to blood loss in HTO. The mean age of patients was 56.6 ± 10.2 years, including 22 males and 26 females. The mean BMI was 28.5 ± 4.2?kg/m2, and the mean blood loss volume was 383.3 ± 181.3?mL, 13 patients with smoking (27.1%), 15 patients with alcohol consumption (31.3%), 23 patients with hypertension (47.9%), 10 patients with diabetes mellitus (20.8%), and 12 patients with history of aspirin (25.0%). Multiple linear regression model suggested alcohol consumption and BMI were associated with blood loss in HTO, R 2 = 0.451, F(9, 38) = 3.462 (P < 0.05). Our study indicates that alcohol consumption and BMI are important risk factors related to blood loss in HTO.

| S-EPMC7212310 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data