Browse
Submit Data
Databases
API
Help

Dataset Information

34 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Removal of Cu(II) Contamination from Aqueous Solution by Ethylenediamine@?-Zeolite Composite.

ABSTRACT: The low cost ?-zeolite and ethylenediamine modified ?-zeolite (EDA@?-zeolite) were prepared by self-assembly method and used for Cu(II) removal from contaminated aqueous solution. Removal ability of ?-zeolite toward Cu(II) was greatly improved after ethylenediamine (EDA) modification, the removal performance was greatly affected by environmental conditions. XPS results illustrated that the amide group played important role in the removal process by forming complexes with Cu(II). The EDA@?-zeolite showed desirable recycling ability. The finding herein suggested that the proposed composite is a promising and suitable candidate for the removal of Cu(II) from contaminated natural wastewater and aquifer.

SUBMITTER: Liu P

PROVIDER: S-EPMC7917737 | biostudies-literature | 2021 Feb

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Removal of Cu(II) Contamination from Aqueous Solution by Ethylenediamine@β-Zeolite Composite.

Liu Peng P Ruan Hui H Li Tiantian T Chen Jiaqi J Ma Fuqiu F Pan Duoqiang D Wu Wangsuo W

Molecules (Basel, Switzerland) 20210212 4

The low cost β-zeolite and ethylenediamine modified β-zeolite (EDA@β-zeolite) were prepared by self-assembly method and used for Cu(II) removal from contaminated aqueous solution. Removal ability of β-zeolite toward Cu(II) was greatly improved after ethylenediamine (EDA) modification, the removal performance was greatly affected by environmental conditions. XPS results illustrated that the amide group played important role in the removal process by forming complexes with Cu(II). The EDA@β-zeolit ...[more]

PMID: 33673249

Similar Datasets

Cellulose nanocrystals/graphene oxide composite for the adsorption and removal of levofloxacin hydrochloride antibiotic from aqueous solution.

Project description:Residual antibiotics in water are often persistent organic pollutants. The purpose of this study was to prepare a cellulose nanocrystals/graphene oxide composite (CNCs-GO) with a three-dimensional structure for the removal of the antibiotic levofloxacin hydrochloride (Levo-HCl) in water by adsorption. The scanning electron microscope, Fourier transform infrared (FT-IR), energy-dispersive spectroscopy, X-ray photoelectron spectroscopy and other characterization methods were used to study the physical structure and chemical properties of the CNCs-GO. The three-dimensional structure of the composite material rendered a high surface area and electrostatic attraction, resulting in increased adsorption capacity of the CNCs-GO for Levo-HCl. Based on the Box-Behnken design, the effects of different factors on the removal of Levo-HCl by the CNCs-GO were explored. The composite material exhibited good antibiotic adsorption capacity, with a removal percentage exceeding 80.1% at an optimal pH of 4, the adsorbent dosage of 1.0 g l-1, initial pollutant concentration of 10.0 mg l-1 and contact time of 4 h. The adsorption isotherm was well fitted by the Sips model, and kinetics studies demonstrated that the adsorption process conformed to a quasi-second-order kinetics model. Consequently, the as-synthesized CNCs-GO demonstrates good potential for the effective removal of antibiotics such as levofloxacin hydrochloride from aqueous media.

| S-EPMC7657919 | biostudies-literature

Fabrication of a GNP/Fe-Mg Binary Oxide Composite for Effective Removal of Arsenic from Aqueous Solution.

Project description:Graphene nanoplates (GNPs) can be used as a platform for homogeneous distribution of adsorbent nanoparticles to improve electron exchange and ion transport for heavy-metal adsorption. In this study, we report a facile thermal decomposition route to fabricate a graphene-supported Fe-Mg oxide composite. The prepared composite was characterized using scanning electron microscopy, transmission electron microscopy, energy-dispersive spectrometry, X-ray diffraction, and X-ray photoelectron spectroscopy. Batch experiments were carried out to evaluate the arsenic adsorption behavior of the GNP/Fe-Mg oxide composite. Both the Langmuir and Freundlich models were employed to describe the adsorption isotherm, in which the sorption kinetics of the arsenic adsorption process by the composite was found to be pseudo-second-order. Furthermore, the reusability and regeneration of the adsorbent were investigated by an assembled-column filter test. The GNP/Fe-Mg oxide composite exhibited significant fast adsorption of arsenic over a wide range of solution pHs, with exceptional durability and recyclability, which could make this composite a very promising candidate for effective removal of arsenic from aqueous solutions.

| S-EPMC6640957 | biostudies-literature

Data on Arsenic(III) removal using zeolite-reduced graphene oxide composite.

Project description:This data article proposes a mechanisms of Arsenic(III) removal from water using zeolite-reduced graphene oxide (ZrGO) composite. Here, the adsorption kinetic and adsorption isotherm analysis for the data obtained by removal of Arsenic(III) using ZrGO is presented. The kinetic model fits the pseudo second order kinetics and indicates the adsorption mechanism to be chemisorption. Redlich Peterson isotherm model best describes the adsorption isotherm. The data are related to the research article "Synthesis of Fly ash based zeolite-reduced graphene oxide composite and its evaluation as an adsorbent for arsenic removal" (Soni and Shukla, 2019).

| S-EPMC6352290 | biostudies-literature

Biosorption characteristic of Alcaligenes sp. BAPb.1 for removal of lead(II) from aqueous solution.

Project description:In this study, strain BAPb.1 was isolated from lead mining area and used as an adsorbent to remove lead(II) ions from aqueous solution. The physicochemical characteristics, heavy metal resistance and antibiotic sensitivity of strain BAPb.1 were investigated. Biosorption capacity was evaluated by batch biosorption experiments, and isothermal characteristics were discussed. Atomic force microscopy (AFM), scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDX) and Fourier transform infrared spectrometry (FTIR) were conducted to explore the mechanism for lead(II) adsorption. Based on morphological and physiological characteristics as well as the phylogenetic analysis of 16S rDNA sequences, strain BAPb.1 was identified as a member of the genus Alcaligenes. It exhibited high resistances to multiple heavy metals such as lead(II), copper(II), zinc(II), nickel(II) and chromium(VI), and to antibiotics such as kanamycin, ampicillin, streptomycin, chloramphenicol, and tetracycline. The optimum conditions for maximum biosorption rate of 85.2% and maximum capacity of 56.8 mg g-1 were found at pH of 5, adsorbent dosage of 1.5 g L-1 (dry weight), initial lead(II) concentration of 100 mg L-1, and contact time of 30 min at 30 °C. Biosorption isotherms were well fitted with Langmuir isotherm model. Mechanism analysis reveals that the lead(II) ions may exchange with sodium and potassium ions, and the hydroxyl, carbonyl and phosphate groups on the cell surface can chelate the lead(II) ions, therefore, surface adsorption play significant role in the biosorption process.

| S-EPMC5451355 | biostudies-literature

Geopolymer/Zeolite composite materials with adsorptive and photocatalytic properties for dye removal.

Project description:This study investigated the adsorption capacities and photocatalytic activities of geopolymer-zeolite composite materials by incorporating different amounts of zeolite and TiO2 in a geopolymer matrix for dye removal. Geopolymers with SiO2/Al2O3 molar ratio of 2.5 were synthesized from metakaolin. The geopolymers containing zeolite and TiO2-doped zeolite exhibited similar behavior in terms of mineral compositions, microstructures and chemical frameworks. The compressive strength of geopolymer-zeolite composite materials decreased with increasing amount of zeolite and TiO2-doped zeolite (0-40 wt%) because of the increase in the porosity of composite materials. The maximum methylene blue adsorption capacity and photocatalytic efficiency of the powdered geopolymer composites with 40 wt% TiO2-doped zeolite was 99.1% and was higher than that of the composites with 40 wt% zeolite without TiO2-doping (92.5%). In addition, the geopolymer composites with TiO2-doped zeolite exhibited excellent stability after repeated usage as photocatalysts. The adsorption capacity and photocatalytic activity of pelletized geopolymer composites decreased because of the reduction in their specific surface area.

| S-EPMC7598482 | biostudies-literature

Facile Synthesis of Calcite-Impregnated Hydrochar with High Sorption Capacity for Cu(II) from Aqueous Solution.

Project description:Calcite-impregnated hydrochar (Ca-HC) was successfully synthesized by a one-step hydrothermal method and used as an adsorbent for Cu(II) remediation. Characterization techniques showed that Ca-HC contained calcite and oxygen-containing functional groups. A series of Cu(II) sorption experiments onto Ca-HC showed that the initial Cu(II) concentration, contact time, sorption temperature, and initial pH of the solution influenced the sorption of Cu(II). The actual achievable sorption capacity of Ca-HC for Cu(II) was 130.57 mg g-1 at 303 K, and the sorption process obeyed the Langmuir model and pseudo-second-order kinetic equation. The precipitation and surface complexation rather than ion exchange were mainly ascribed to the removal of Cu(II) onto Ca-HC. The calcite provided the active site to produce posnjakite precipitation during the sorption process and enhance the sorption capacity of the hydrochar. Therefore, these results demonstrated that Ca-HC is an effective sorbent that can remove Cu(II) from water.

| S-EPMC6751695 | biostudies-literature

Waste foundry sand/MgFe-layered double hydroxides composite material for efficient removal of Congo red dye from aqueous solution.

Project description:We aimed to obtain magnesium/iron (Mg/Fe)-layered double hydroxides (LDHs) nanoparticles-immobilized on waste foundry sand-a byproduct of the metal casting industry. XRD and FT-IR tests were applied to characterize the prepared sorbent. The results revealed that a new peak reflected LDHs nanoparticles. In addition, SEM-EDS mapping confirmed that the coating process was appropriate. Sorption tests for the interaction of this sorbent with an aqueous solution contaminated with Congo red dye revealed the efficacy of this material where the maximum adsorption capacity reached approximately 9127.08?mg/g. The pseudo-first-order and pseudo-second-order kinetic models helped to describe the sorption measurements, indicating that the physical and chemical forces governed the removal process.

| S-EPMC7005020 | biostudies-literature

Effective Removal of Pb(II) from Aqueous Media by a New Design of Cu-Mg Binary Ferrite.

Project description:Metal oxides and their composites have been extensively studied as effective adsorbents for the removal of heavy metals from aqueous solutions in environmental remediation. In this work, Cu0.5Mg0.5Fe2O4 was synthesized by a co-precipitation method followed by calcination (900 °C) and investigated for Pb(II) adsorption. The resultant samples were characterized by various analytical techniques including X-ray diffraction, N2 adsorption-desorption, scanning electron microscopy, thermogravimetric analysis, and Fourier transform infrared spectroscopy. The results revealed that single-phase cubic spinel was obtained by the calcination of as-synthesized samples at a temperature of 900 °C. Cu0.5Mg0.5Fe2O4 ferrite is a mesoporous material with a surface area, a total pore volume, and an average pore size of 41.3 m2/g, 0.2 cm3/g, and 15.1 nm, respectively. Pb(II) adsorption on Cu0.5Mg0.5Fe2O4 fitted well to the Langmuir model, indicating monolayer adsorption with a maximum capacity of 57.7 mg/g. The pseudo-second-order kinetic model can exactly describe Pb(II) adsorption with the normalized standard deviation (?q) of 1.24%. The obtained results confirmed that the Cu0.5Mg0.5Fe2O4 ternary oxides exhibit a high adsorption capacity toward Pb(II), thanks to the increase in active adsorptive sites of ferrite.

| S-EPMC7144175 | biostudies-literature

Removal of Mn (II) by Sodium Alginate/Graphene Oxide Composite Double-Network Hydrogel Beads from Aqueous Solutions.

Project description:After the successful preparation of empirical double network hydrogel beads from graphene oxide/sodium alginate(GO/SA), its cationic metal adsorption performance in aqueous solutions were investigated. Taking Mn(II) as an example, the contribution of several factors including pH, bead dosage, temperature, contact time and initial concentration ions to adsorption efficiency were examined. The Transmission Electron Microscopy (TEM) results indicate that the GO/SA double (GAD) network hydrogel bead strongly interpenetrate and the adsorption of Mn(II) is mainly influenced by solution pH, bead dose and temperature. The GAD beads exhibit an excellent adsorption capacity of 56.49?mg?g-1. The adsorption process fit both Pseudo-second order kinetic model (R2?>?0.97) and the Freundlich adsorption isotherm (R2?>?0.99) and is spontaneous. After seven rounds of adsorption-desorption cycle, the adsorption capacity of GAD hydrogel remained unchanged at 18.11?mg/g.

| S-EPMC6048064 | biostudies-literature

Preconcentration of Fe(III), Co(II), Ni(II), Cu(II), Zn(II) and Pb(II) with ethylenediamine-modified graphene oxide.

Project description:We describe a novel solid phase sorbent that was synthesized by coupling graphene oxide (GO) to ethylenediamine (EDA). This nanomaterial (referred to as GO-EDA) is capable of adsorbing the ions of iron, cobalt, nickel, copper, zinc and lead. The ethylenediamine-modified graphene oxide was characterized by X-ray photoelectron spectroscopy, scanning electron microscopy and Fourier transform infrared spectroscopy. The analytical procedure relies on (a) sorption of metal ions on GO-EDA dispersed in aqueous samples; (b) filtering, and (c) direct submission of the filter paper to energy-dispersive X-ray fluorescence spectrometry. This kind of dispersive micro-solid phase extraction was optimized with respect to pH values, concentration of GO-EDA, contact time, and the effects of interfering ions and humic acid on recovery of determined elements. Under optimized conditions, the recoveries of spiked samples range from 90 to 98 %. The detection limits are 0.07, 0.10, 0.07, 0.08, 0.06 and 0.10 ng mL-1 for Fe(III), Co(II), Ni(II), Cu(II), Zn(II) and Pb(II), respectively. The method has a relative standard deviation of <6 %, and its accuracy was verified by analysis of two standard reference materials [LGC6016 (estuarine water) and BCR-610 (groundwater)]. It was successfully applied to the determination of trace amounts of these metal ions in water samples. Graphical AbstractGraphene oxide was coupled to ethylenediamine in order to obtain an effective sorbent (GO-EDA) for preconcentration of Fe(III), Co(II), Ni(II), Cu(II), Zn(II) and Pb(II) from environmental water samples.

| S-EPMC4701767 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data