Improving the performance of opportunistic routing using min-max range and optimum energy level for relay node selection in wireless sensor networks.
Ontology highlight
ABSTRACT:
SUBMITTER: Yee PL
PROVIDER: S-EPMC7924681 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:Wireless Sensor Network monitor and control the physical world via large number of small, low-priced sensor nodes. Existing method on Wireless Sensor Network (WSN) presented sensed data communication through continuous data collection resulting in higher delay and energy consumption. To conquer the routing issue and reduce energy drain rate, Bayes Node Energy and Polynomial Distribution (BNEPD) technique is introduced with energy aware routing in the wireless sensor network. The Bayes Node Energy Distribution initially distributes the sensor nodes that detect an object of similar event (i.e., temperature, pressure, flow) into specific regions with the application of Bayes rule. The object detection of similar events is accomplished based on the bayes probabilities and is sent to the sink node resulting in minimizing the energy consumption. Next, the Polynomial Regression Function is applied to the target object of similar events considered for different sensors are combined. They are based on the minimum and maximum value of object events and are transferred to the sink node. Finally, the Poly Distribute algorithm effectively distributes the sensor nodes. The energy efficient routing path for each sensor nodes are created by data aggregation at the sink based on polynomial regression function which reduces the energy drain rate with minimum communication overhead. Experimental performance is evaluated using Dodgers Loop Sensor Data Set from UCI repository. Simulation results show that the proposed distribution algorithm significantly reduce the node energy drain rate and ensure fairness among different users reducing the communication overhead.
| S-EPMC4591332 | biostudies-literature
Project description:Ad-hoc wireless sensor networks face challenges of optimized node deployment for maximizing coverage and efficiently routing data to control centers in post disaster events. These challenges impact the outcome for extending the lifetime of wireless sensor networks. This study presents a uav assisted reactive zone based EHGR (energy efficient hierarchical gateway routing protocol) that is deployed in a situation where the natural calamity has caused communication and infrastructure damage to a major portion of the sensor network. EHGR is a hybrid multi layer routing protocol for large heterogeneous sensor nodes (smart nodes, basic nodes, user handheld devices etc.) EHGR is tailored to meet two important concerns for a disaster hit wsn ie. optimized deployment and energy efficient routing. The first part of EGHR focuses on maximized coverage during node deployments. Maximized coverage is an important aspect to be considered during the event of disaster since most of the nodes loose coverage and are detached from the wireless sensor network. The first part of EHGR uses state of the art game theory approach to build a model that maximizes the coverage of nodes during the deployment phase from all participating entities i.e. nodes and uavs. Rather than fixing the cluster head as is the case in traditional cluster-based approaches EHGR uses the energy centroid nodes. Energy centroid nodes evolve on the basis of aggregated energy of the zone. This approach is superior to simply electing cluster head nodes on the basis of some probability function. The nodes that fail to achieve any successful outcome from the game theory matching model fail to get any association. These nodes will use multi hop d2d relay approach to reach the energy centroid nodes. Gateway relay nodes used with the game theory approach during the deployment of the uav assisted wsn improves the overall coverage by 25% against traditional leach based hierarchical approaches. Once the optimum deployment phase is completed the routing phase is initiated. Aggregated data is sent by the energy centroid nodes from the ECN nodes to the servicing micro controller enabled un manned aerial vehicles. The routing process places partial burden of zone formation and data transmission to the control center for each phase on the servicing uavs. Energy centroid nodes engage only in the data aggregation process and transmission of data to servicing uav. Servicing-uavs reduce energy dissipated of the entire zone which result in gradual decrease of energy for the zone thus increasing the network lifetime. Node deployment phase and the routing phase of EHGR utilize the computations provide by the mirco controller enabled unmanned aerial vehicles such that the computationally intensive calculations are offloaded to the servicing uav. Experiment results indicate an increase in the first dead node report, half dead node report, and last dead node report. Network lifetime is extended to approximately 1800 rounds which is an increase by ratio of 100% against the traditional leach approach and increase by 50% percent against the latest approaches as highlighted in the literature.
| S-EPMC10752518 | biostudies-literature
Project description:This paper proposed a "Probabilistic and Deterministic Tree-based Routing for WSNs (PDTR)". The PDTR builds a tree from the leaves to the head (sink), according to the best elements in the initial probabilistic routing table, measured by the product of hops-count distribution, and transmission distance distribution, to select the best tree-paths. Each sender node forwards the received data to the next hop via the deterministic built tree. After that, when any node loses of its energy, PDTR updates the tree at that node. This update links probabilistically one of that node's children to a new parent, according to the updated probabilistic routing table, measured by the product of the updated: Hops-count distribution, transmission distance distribution, and residual energy distribution at the loss of ? e energy. By implementing the control parameters in each distribution, PDTR shows the impact of each distribution in the routing path. These control parameters are oriented by the user for different performances. The simulation results prove that selecting the initial best paths to root the packets via unicast, then improving the tree at the node with loss of energy by rooting the packets via anycast, leads to better performance in terms of energy consumption and network lifetime.
| S-EPMC7146286 | biostudies-literature
Project description:Designing a Wireless Sensor Network (WSN) to achieve a high Quality of Service (QoS) (network performance and durability) is a challenging problem. We address it by focusing on the performance of the 802.15.4 communication protocol because the IEEE 802.15.4 Standard is actually considered as one of the reference technologies in WSNs. In this paper, we propose to control the sustainable use of resources (i.e., energy consumption, reliability and timely packet transmission) of a wireless sensor node equipped with photovoltaic cells by an adaptive tuning not only of the MAC (Medium Access Control) parameters but also of the sampling frequency of the node. To do this, we use one of the existing control approaches, namely the viability theory, which aims to preserve the functions and the controls of a dynamic system in a set of desirable states. So, an analytical model, describing the evolution over time of nodal resources, is derived and used by a viability algorithm for the adaptive tuning of the IEEE 802.15.4 MAC protocol. The simulation analysis shows that our solution allows ensuring indefinitely, in the absence of hardware failure, the operations (lifetime duration, reliability and timely packet transmission) of an 802.15.4 WSN and one can temporarily increase the sampling frequency of the node beyond the regular sampling one. This latter brings advantages for agricultural and environmental applications such as precision agriculture, flood or fire prevention. Main results show that our current approach enable to send more information when critical events occur without the node runs out of energy. Finally, we argue that our approach is generic and can be applied to other types of WSN.
| S-EPMC5325272 | biostudies-literature
Project description:Due to the lack of dependency for routing initiation and an inadequate allocated sextant on responding messages, the secure geographic routing protocols for Wireless Sensor Networks (WSNs) have attracted considerable attention. However, the existing protocols are more likely to drop packets when legitimate nodes fail to respond to the routing initiation messages while attackers in the allocated sextant manage to respond. Furthermore, these protocols are designed with inefficient collection window and inadequate verification criteria which may lead to a high number of attacker selections. To prevent the failure to find an appropriate relay node and undesirable packet retransmission, this paper presents Secure Region-Based Geographic Routing Protocol (SRBGR) to increase the probability of selecting the appropriate relay node. By extending the allocated sextant and applying different message contention priorities more legitimate nodes can be admitted in the routing process. Moreover, the paper also proposed the bound collection window for a sufficient collection time and verification cost for both attacker identification and isolation. Extensive simulation experiments have been performed to evaluate the performance of the proposed protocol in comparison with other existing protocols. The results demonstrate that SRBGR increases network performance in terms of the packet delivery ratio and isolates attacks such as Sybil and Black hole.
| S-EPMC5266307 | biostudies-literature
Project description:Wireless sensor networks (WSN) are among the most prominent current technologies. Its popularity has skyrocketed because of its capacity to operate in difficult situations. The WSN market encompasses various industries, including building automation, security networks, healthcare systems, logistics, and military operations. Therefore, increasing the energy efficiency of these networks is of utmost importance. Hierarchical topology, which typically uses a clustering methodology, is one of the most well-known methods for WSN energy optimization. To achieve energy efficiency in WSN, hierarchical topology low-energy adaptive clustering hierarchy (LEACH) was first introduced, and this served as the foundation. However, conventional LEACH has several limitations, which have led to extensive research into improving LEACH's efficacy in its current form. The use of particular algorithms and strategies to enhance the functionality of the conventional LEACH protocol forms the basis of ongoing efforts. Utilizing this enhanced LEACH, performance in terms of throughput and network life may be enhanced by concentrating on elements such as cluster head formation and transmission energy consumption. The enhanced LEACH algorithm demonstrates significant improvements in both throughput and network lifetime compared with conventional LEACH. Through rigorous experimentation, it was found that the enhanced algorithm increases the throughput by 25% on average, which is attributed to its dynamic clustering and optimized routing strategies. Furthermore, the network lifetime is extended by approximately 30%, primarily because of enhanced energy efficiency through adaptive clustering and transmission power control.
| S-EPMC11232628 | biostudies-literature
Project description:This paper presents a leader-based approach to routing in Mobile Wireless Sensor Networks (MWSN). Using local information from neighbour nodes, a leader election mechanism maintains a spanning tree in order to provide the necessary adaptations for efficient routing upon the connectivity changes resulting from the mobility of sensors or sink nodes. We present two protocols following the leader election approach, which have been implemented using Castalia and OMNeT++. The protocols have been evaluated, besides other reference MWSN routing protocols, to analyse the impact of network size and node velocity on performance, which has demonstrated the validity of our approach.
| S-EPMC5539741 | biostudies-other
Project description:Wireless sensor networks (WSNs) have been widely investigated in recent years. One of the fundamental issues in WSNs is packet routing, because in many application domains, packets have to be routed from source nodes to destination nodes as soon and as energy efficiently as possible. To address this issue, a large number of routing approaches have been proposed. Although every existing routing approach has advantages, they also have some disadvantages. In this paper, a multi-agent framework is proposed that can assist existing routing approaches to improve their routing performance. This framework enables each sensor node to build a cooperative neighbour set based on past routing experience. Such cooperative neighbours, in turn, can help the sensor to effectively relay packets in the future. This framework is independent of existing routing approaches and can be used to assist many existing routing approaches. Simulation results demonstrate the good performance of this framework in terms of four metrics: average delivery latency, successful delivery ratio, number of live nodes and total sensing coverage.
| S-EPMC4481995 | biostudies-other
Project description:Wireless Sensor Networks (WSNs) are becoming ubiquitous in everyday life due to their applications in weather forecasting, surveillance, implantable sensors for health monitoring and other plethora of applications. WSN is equipped with hundreds and thousands of small sensor nodes. As the size of a sensor node decreases, critical issues such as limited energy, computation time and limited memory become even more highlighted. In such a case, network lifetime mainly depends on efficient use of available resources. Organizing nearby nodes into clusters make it convenient to efficiently manage each cluster as well as the overall network. In this paper, we extend our previous work of grid-based hybrid network deployment approach, in which merge and split technique has been proposed to construct network topology. Constructing topology through our proposed technique, in this paper we have used analytical network process (ANP) model for cluster head selection in WSN. Five distinct parameters: distance from nodes (DistNode), residual energy level (REL), distance from centroid (DistCent), number of times the node has been selected as cluster head (TCH) and merged node (MN) are considered for CH selection. The problem of CH selection based on these parameters is tackled as a multi criteria decision system, for which ANP method is used for optimum cluster head selection. Main contribution of this work is to check the applicability of ANP model for cluster head selection in WSN. In addition, sensitivity analysis is carried out to check the stability of alternatives (available candidate nodes) and their ranking for different scenarios. The simulation results show that the proposed method outperforms existing energy efficient clustering protocols in terms of optimum CH selection and minimizing CH reselection process that results in extending overall network lifetime. This paper analyzes that ANP method used for CH selection with better understanding of the dependencies of different components involved in the evaluation process.
| S-EPMC5515436 | biostudies-other
Project description:Wireless sensor networks (WSNs) form an important part of industrial application. There has been growing interest in the potential use of WSNs in applications such as environment monitoring, disaster management, health care monitoring, intelligence surveillance and defence reconnaissance. In these applications, the sensor nodes (SNs) are envisaged to be deployed in sizeable numbers in an outlying area, and it is quite difficult to replace these SNs after complete deployment in many scenarios. Therefore, as SNs are predominantly battery powered devices, the energy consumption of the nodes must be properly managed in order to prolong the network lifetime and functionality to a rational time. Different energy-efficient and energy-balanced routing protocols have been proposed in literature over the years. The energy-efficient routing protocols strive to increase the network lifetime by minimizing the energy consumption in each SN. On the other hand, the energy-balanced routing protocols protract the network lifetime by uniformly balancing the energy consumption among the nodes in the network. There have been various survey papers put forward by researchers to review the performance and classify the different energy-efficient routing protocols for WSNs. However, there seems to be no clear survey emphasizing the importance, concepts, and principles of load-balanced energy routing protocols for WSNs. In this paper, we provide a clear picture of both the energy-efficient and energy-balanced routing protocols for WSNs. More importantly, this paper presents an extensive survey of the different state-of-the-art energy-efficient and energy-balanced routing protocols. A taxonomy is introduced in this paper to classify the surveyed energy-efficient and energy-balanced routing protocols based on their proposed mode of communication towards the base station (BS). In addition, we classified these routing protocols based on the solution types or algorithms, and the input decision variables defined in the routing algorithm. The strengths and weaknesses of the choice of the decision variables used in the design of these energy-efficient and energy-balanced routing protocols are emphasised. Finally, we suggest possible research directions in order to optimize the energy consumption in sensor networks.
| S-EPMC5470474 | biostudies-literature