Browse
Submit Data
Databases
API
Help

Dataset Information

12 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Biofunctionalization of Water-Soluble poly(Phenylene Ethynylene)s.

ABSTRACT: We report the use of amide coupling chemistry to covalently link five different biofunctional groups onto an anionic water-soluble poly(phenylene ethynylene) (PPE) polymer. Two of the biofunctionalized PPEs are used in prototype applications, including pH sensing and flow cytometry labeling. The PPE is functionalized with carboxylate (R-CO₂^-) and sulfonate (R-SO₃^-) ionic groups. By using an activated ester, the amine-functionalized groups are covalently linked to the PPE polymer via amide linkages. The reaction chemistry is optimized using biotin-ethylene diamine, making it possible to control the loading of the biotin functionality on the PPE chains. Using the optimized approach, a family of five PPEs were prepared that contain biotin, rhodamine, cholesterol, mannose, or folic acid moieties appended to the polymer backbones. The rhodamine- and biotin-modified PPEs were further applied for pH response and flow cytometry applications. The reported approach can be utilized for other classes of water-soluble conjugated polymers, allowing facile development of a variety of new functionalized water-soluble conjugated polymers for a range of applications including sensing, bioimaging, and flow cytometry analysis.

SUBMITTER: Sun H

PROVIDER: S-EPMC7927151 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

A Facile Synthetic Route to Amphiphilic Poly(Meta-Phenylene Ethynylene) and Poly(Meta-Phenylene Ethynylene)-Block-Polyisocyanide Using a Single Catalyst.

Project description:An optically active, amphiphilic meta-phenylene ethynylene (m-PE) bearing a chiral amide pendant was designed and synthesized. Living polymerization of m-PE using alkyne-Pd(II) as the initiator afforded well-defined poly(meta-phenylene ethynylene) (m-PPE). These m-PPEs were found to have a stable helical conformation in THF, 1,4-dioxane, and CH₃CN and showed split Cotton effects over the range of 245⁻400 nm. The positive first Cotton effect was observed at a wavelength of approximately 308 nm, and the negative second Cotton effect was observed at a wavelength of approximately 289 nm. The m-PPEs exhibited helical conformational changes in different mixed solvents and showed effective solvent-dependent helix inversion in CHCl₃/THF solutions. The sign of the Cotton effect of m-PPE was inverted at 25 °C by varying the mixing ratio of THF and CHCl₃. Finally, amphiphilic poly(meta-phenylene ethynylene)-block-polyisocyanide containing hydrophilic PPE and hydrophobic PPI segments were facilely prepared using Pd(II)-terminated m-PPE as the macroinitiator. This block copolymer can self-assemble into well-defined spherical nanostructures in a selective THF/CH₃OH solution. This efficient polymerization will open up enormous opportunities for the preparation of functional amphiphilic block copolymers in a wide variety of fields.

| S-EPMC6403950 | biostudies-literature

Saccharide Detection Based on the Amplified Fluorescence Quenching of a Water-Soluble Poly(phenylene ethynylene) by a Boronic Acid Functionalized Benzyl Viologen Derivative.

Project description:The amplified quenching of an anionic conjugated polymer, sulfonated poly(phenylene ethynylene) (PPE-SO3 -), by a cationic quencher comprising a boronic acid functionalized benzyl viologen (p-BV2+), has been used to optically detect sugars. In the absence of sugar, a strong polymer/quencher interaction leads to superlinear quenching. In the presence of sugar at pH 7.4, the dicationic viologen derivative forms a neutral zwitterionic species, reducing its ability to complex with and quench the anionic polymer's emission. Addition of sugar to the polymer/quencher system leads a large increase in the fluorescence intensity (up to 70-fold in one case). Spectral data, quenching parameters, and sugar titration curves are presented and discussed in terms of future development of glucose sensors.

| S-EPMC7067143 | biostudies-literature

Effects of Neutral, Anionic and Cationic Polymer Brushes Grafted from Poly(para-phenylene vinylene) and Poly(para-phenylene ethynylene) on the Polymer's Photoluminescent Properties.

Project description:The conformation of a fluorescent polymer, in the solid state or in solution, plays a critical role in the polymer's fluorescent properties. Thus, grafted side chains on a fluorescent polymer can directly influence its optical properties. In this study, the effect of grafted polymeric side chains on the photoluminescent properties of poly(para-phenylene vinylene) (PPV) and poly(para-phenylene ethynylene) (PPE) were investigated. Low- and high-molecular-weight grafts of neutral poly(n-butyl acrylate), cationic poly(trimethylaminoethyl methacrylate) and anionic poly(sulfopropyl acrylate) were grafted onto PPVs and PPEs, and the effect of the grafting on the graft copolymer's absorption and emission wavelengths, the fluorescence intensity and the quantum yield were studied. The results indicate that in the case of the ionic grafts, contrary to the expectations, the polymers have a reduced quantum yield. This contrasts with the copolymers with uncharged side chains (PnBA), where a major increase in the quantum yield is seen for the self-quenching conjugated pristine polymers. These results reinforce that the molecular conformation of the polymer in a solid or solution plays a critical role in fluorescent polymers photoluminescent properties.

| S-EPMC9322352 | biostudies-literature

Triptycene diols: a strategy for synthesizing planar π systems through catalytic conversion of a poly(p-phenylene ethynylene) into a poly(p-phenylene vinylene).

Project description: Not available

| S-EPMC3496247 | biostudies-literature

Synthesis and Photophysical and Electroluminescent Properties of Poly(1,4-phenylene-ethynylene)-<i>alt</i>-poly(1,4-phenylene-vinylene)s with Various Dissymmetric Substitution of Alkoxy Side Chains.

Project description:The synthesis and characterization of a set of conjugated polymers, poly(1,4-phenylene-ethynylene)-alt-poly(1,4-phenylene-vinylene)s (PPE-PPVs), with a dissymmetrical configuration (partial or total) of alkoxy side chains is reported. Five new polymers bearing octyloxy and/or octadecyloxy side chains at the phenylene-ethynylene and phenylene-vinylene segments, respectively, were obtained. Two symmetrical substituted polymers were used for comparison. Polymers with weight-average molecular weight, Mw, up to 430 000 g/mol and degree of polymerization between 17 and 322 were obtained by a Horner-Wadsworth-Emmons olefination polycondensation reaction of the respective luminophoric dialdehydes and bisphosphonates. As expected, identical conjugated backbones in all polymers results in very similar photophysical response in dilute solution, with high fluorescence quantum yields between 50% and 80%. In contrast, the thin film properties are dependent on the combinatorial effects of side chain configuration, molecular weight, and film thickness parameters, which are the basis of the resulting comparison and discussion.

| S-EPMC4730230 | biostudies-literature

Sensitizing TADF Absorption Using Variable Length Oligo(phenylene ethynylene) Antennae.

Project description:Beyond their applications in organic light-emitting diodes (OLEDs), thermally activated delayed fluorescence (TADF) materials can also make good photonic markers. Time-gated measurement of their delayed emission enables "background-free" imaging in, for example, biological systems, because no naturally-occurring compounds exhibit such long-lived emission. Attaching a strongly-absorbing antenna, such as a phenylene ethynylene oligomer, to the TADF core would be of interest to increase their brightness as photonic markers. With this motivation, we study a sequence of TADF-oligomer conjugates with oligomers of varying length and show that, even when the absorption of the oligomer is almost resonant with the charge-transfer absorption of the TADF core, the antenna transfers energy to the TADF core. We study this series of compounds with time resolved emission and transient absorption spectroscopy and find that the delayed fluorescence is essentially turned-off for the longer antennae. Interestingly, we find that the turn-off of the delayed fluorescence is not caused by quenching of the TADF charge-transfer triplet state due to triplet energy transfer of the lower-lying triplet state to the antenna, but must be associated with a decrease in the reverse intersystem crossing rate. These results are of relevance for the further development of TADF "dyes" and also, in the broader context, for understanding the dynamics of TADF molecules in the vicinity of energy donors/acceptors (i.e., in fluorescent OLEDs wherein TADF molecules are used as an assistant dopant).

| S-EPMC7054278 | biostudies-literature

On-surface synthesis of poly(p-phenylene ethynylene) molecular wires via in situ formation of carbon-carbon triple bond.

Project description:The carbon-carbon triple bond (-C≡C-) is an elementary constituent for the construction of conjugated molecular wires and carbon allotropes such as carbyne and graphyne. Here we describe a general approach to in situ synthesize -C≡C- bond on Cu(111) surface via homo-coupling of the trichloromethyl groups, enabling the fabrication of individual and arrays of poly(p-phenylene ethynylene) molecular wires. Scanning tunneling spectroscopy reveals a delocalized electronic state extending along these molecular wires, whose structure is unraveled by atomically resolved images of scanning tunneling microscopy and noncontact atomic force microscopy. Combined with density functional theory calculations, we identify the intermediates formed in the sequential dechlorination process, including surface-bound benzyl, carbene, and carbyne radicals. Our method overcomes the limitation of previous on-surface syntheses of -C≡C- incorporated systems, which require the precursors containing alkyne group; it therefore allows for a more flexible design and fabrication of molecular architectures with tailored properties.

| S-EPMC5998079 | biostudies-literature

Poly(catecholamine) coated CsPbBr<sub>3</sub> perovskite microlasers: lasing in water and biofunctionalization.

Project description:Lead halide perovskite (LHP) is a promising material for various optoelectronic applications. Surface coating on particles is a common strategy to improve their functionality and environmental stability, but LHP is not amenable to most coating chemistries because of its intrinsic weakness against polar solvents. Here, we describe a novel method of synthesizing LHP microlasers in a super-saturated polar solvent using sonochemistry and applying various functional coatings on individual microlasers in situ. We synthesize cesium lead bromine perovskite (CsPbBr3) microcrystals capped with organic poly-norepinephrine (pNE) layers. The catechol group of pNE coordinates to bromine-deficient lead atoms, forming a defect-passivating and diffusion-blocking shell. The pNE layer enhances the material lifetime of CsPbBr3 in water by 2,000-folds, enabling bright luminescence and lasing from single microcrystals in water. Furthermore, the pNE shell permits biofunctionalization with proteins, small molecules, and lipid bilayers. Luminescence from CsPbBr3 microcrystals is sustained in water over 1 hour and observed in live cells. The functionalization method may enable new applications of LHP laser particles in water-rich environments.

| S-EPMC8447242 | biostudies-literature

Open-Bandgap Graphene-Based Field-Effect Transistor Using Oligo(phenylene-ethynylene) Interfacial Chemistry.

Project description:Organic interfacial compounds (OICs) are required as linkers for the highly stable and efficient immobilization of bioprobes in nanobiosensors using 2D nanomaterials such as graphene. Herein, we first demonstrated the fabrication of a field-effect transistor (FET) via a microelectromechanical system process after covalent functionalization on large-scale graphene by introducing oligo(phenylene-ethynylene)amine (OPE). OPE was compared to various OICs by density functional theory simulations and was confirmed to have a higher binding energy with graphene and a lower band gap than other OICs. OPE can improve the immobilization efficiency of a bioprobe by forming a self-assembly monolayer via anion-based reaction. Using this technology, Magainin I-conjugated OGMFET (MOGMFET) showed a high sensitivity, high selectivity, with a limit of detection of 100 cfu mL-1 . These results indicate that the OPE OIC can be applied for stable and comfortable interfacing technology for biosensor fabrication.

| S-EPMC9826410 | biostudies-literature

Efficient synthesis of phenylene-ethynylene rods and their use as rigid spacers in divalent inhibitors.

Project description:The synthesis of phenylene-ethynylene rods and their use as rigid spacers is described. Alternation of a Sonogashira reaction and silyl group cleavage was used to obtain rigid spacers with even and odd numbers of phenylene units. Preliminary applications of these rods in divalent systems are shown. Inhibition studies with Pseudomonas Aeruginosa lectin LecA showed that the rigid spacer proved greatly beneficial for the inhibitory potency.

| S-EPMC3566787 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data