Author Correction: All-optical switching of an epsilon-near-zero plasmon resonance in indium tin oxide.
Ontology highlight
ABSTRACT:
SUBMITTER: Bohn J
PROVIDER: S-EPMC7933241 | biostudies-literature | 2021 Mar
REPOSITORIES: biostudies-literature
Publications
Author Correction: All-optical switching of an epsilon-near-zero plasmon resonance in indium tin oxide.
Bohn Justus J Luk Ting Shan TS Tollerton Craig C Hutchings Sam W SW Brener Igal I Horsley Simon S Barnes William L WL Hendry Euan E
Nature communications 20210304 1
Similar Datasets
Project description:Nonlinear optical devices and their implementation into modern nanophotonic architectures are constrained by their usually moderate nonlinear response. Recently, epsilon-near-zero (ENZ) materials have been found to have a strong optical nonlinearity, which can be enhanced through the use of cavities or nano-structuring. Here, we study the pump dependent properties of the plasmon resonance in the ENZ region in a thin layer of indium tin oxide (ITO). Exciting this mode using the Kretschmann-Raether configuration, we study reflection switching properties of a 60 nm layer close to the resonant plasmon frequency. We demonstrate a thermal switching mechanism, which results in a shift in the plasmon resonance frequency of 20 THz for a TM pump intensity of 70 GW cm-2. For degenerate pump and probe frequencies, we highlight an additional two-beam coupling contribution, not previously isolated in ENZ nonlinear optics studies, which leads to an overall pump induced change in reflection from 1% to 45%.
| S-EPMC7884677 | biostudies-literature
Project description:We report a novel optical waveguide design of a hollow step index fiber modified with a thin layer of indium tin oxide (ITO). We show an excitation of highly confined waveguide mode in the proposed fiber near the wavelength where permittivity of ITO approaches zero. Due to the high field confinement within thin ITO shell inside the fiber, the epsilon-near-zero (ENZ) mode can be characterized by a peak in modal loss of the hybrid waveguide. Our results show that such in-fiber excitation of ENZ mode is due to the coupling of the guided core mode to the thin-film ENZ mode. We also show that the phase matching wavelength, where the coupling takes place, varies depending on the refractive index of the constituents inside the central bore of the fiber. These ENZ nanostructured optical fibers have many potential applications, for example, in ENZ nonlinear and magneto-optics, as in-fiber wavelength-dependent filters, and as subwavelength fluid channel for optical and bio-photonic sensing.
| S-EPMC5799369 | biostudies-literature
Project description:Epsilon-near-zero (ENZ) polaritons in a thin transparent conducting-oxide film exhibit a significant electric field enhancement and localization within the film at frequencies close to their plasma frequency, but do not propagate. Meanwhile, plasmon polariton modes in thin metallic films can propagate for several microns, but are more loosely confined in the metal. Here, we propose a strongly coupled bilayered structure of a thin gold film on a thin indium tin oxide (ITO) film that supports hybrid polariton modes. We experimentally characterize the dispersion of these modes and show that they have propagation lengths of 4-8 μm while retaining mode confinement greater than that of the polariton in gold films by nearly an order of magnitude. We study the tunability of this coupling strength by varying the thickness of the ITO film and show that ultrastrong coupling is possible at certain thicknesses. The unusual linear and nonlinear optical properties of ITO at ENZ frequencies make these bifilms useful for the active tuning of strong coupling, ultrafast switching, and enhanced nonlinear interactions at near-infrared frequencies.
| S-EPMC9853859 | biostudies-literature
Project description:Optical nonlocalities are elusive and hardly observable in traditional plasmonic materials like noble and alkali metals. Here we report experimental observation of viscoelastic nonlocalities in the infrared optical response of epsilon-near-zero nanofilms made of low-loss doped cadmium-oxide. The nonlocality is detectable thanks to the low damping rate of conduction electrons and the virtual absence of interband transitions at infrared wavelengths. We describe the motion of conduction electrons using a hydrodynamic model for a viscoelastic fluid, and find excellent agreement with experimental results. The electrons' elasticity blue-shifts the infrared plasmonic resonance associated with the main epsilon-near-zero mode, and triggers the onset of higher-order resonances due to the excitation of electron-pressure modes above the bulk plasma frequency. We also provide evidence of the existence of nonlocal damping, i.e., viscosity, in the motion of optically-excited conduction electrons using a combination of spectroscopic ellipsometry data and predictions based on the viscoelastic hydrodynamic model.
| S-EPMC6008458 | biostudies-literature
Project description:In this work, we propose a micro-scale modulator architecture with compact size, low insertion loss, high extinction ratio, and low energy/bit while being compatible with the silicon-on-insulator (SOI) platform. This is achieved through the utilization of epsilon-near-zero (ENZ) effect of indium-tin-oxide (ITO) to maximize the attainable change in the effective index of the optical mode. It also exploits the ITO layer in a hybrid plasmonic ring resonator which further intensifies the effect of the changes in both the real and imaginary parts of the effective index. By electrically inducing carriers in the indium tin oxide (ITO), to reach the ENZ state, the resonance condition shifts, and the losses of the hybrid plasmonic ring resonator increases significantly. This mechanism is optimized to maximize the extinction ratio and minimize the insertion loss. The proposed structure is designed to maximize the coupling to and from standard SOI waveguide, used as access ports. In addition, the operational region is reconfigurable by changing the bias voltage.
| S-EPMC6491601 | biostudies-literature
Project description:We propose a general, easy-to-implement scheme for broadband coherent perfect absorption (CPA) using epsilon-near-zero (ENZ) multilayer films. Specifically, we employ indium tin oxide (ITO) as a tunable ENZ material, and theoretically investigate CPA in the near-infrared region. We first derive general CPA conditions using the scattering matrix and the admittance matching methods. Then, by combining these two methods, we extract analytic expressions for all relevant parameters for CPA. Based on this theoretical framework, we proceed to study ENZ CPA in a single layer ITO film and apply it to all-optical switching. Finally, using an ITO multilayer of different ENZ wavelengths, we implement broadband ENZ CPA structures and investigate multi-wavelength all-optical switching in the technologically important telecommunication window. In our design, the admittance matching diagram was employed to graphically extract not only the structural parameters (the film thicknesses and incident angles), but also the input beam parameters (the irradiance ratio and phase difference between two input beams). We find that the multi-wavelength all-optical switching in our broadband ENZ CPA system can be fully controlled by the phase difference between two input beams. The simple but general design principles and analyses in this work can be widely used in various thin-film devices.
| S-EPMC4786804 | biostudies-literature
Project description:The field of plasmonics has substantially affected the study of light-matter interactions at the subwavelength scale. However, dissipation losses still remain an inevitable obstacle in the development of plasmonic-based wave propagation. Although different materials with moderate losses are being extensively studied, absorption arguably continues to be the key challenge in the field. Here, we theoretically and numerically investigate a different route toward the reduction of loss in propagating plasmon waves. Rather than focusing on a material-based approach, we take advantage of structural dispersion in waveguides to manipulate effective material parameters, thus leading to smaller losses. The potential of this approach is illustrated with two examples: plane-wave propagation within a bulk epsilon-near-zero medium and surface plasmon polariton propagation at the interface of a medium with negative permittivity. We provide the recipe for a practical implementation at mid-infrared frequencies. Our results might represent an important step toward the development of low-loss plasmonic technologies.
| S-EPMC6788869 | biostudies-literature
Project description:A wide variety of nanophotonic applications require controlling the optical phase without changing optical absorption, which in silicon (Si) photonics has been mostly pursued electrically. Here, we investigate the unique light-matter interaction exhibited by epsilon-near-zero (ENZ) materials for all-optical phase control in nanophotonic silicon waveguides. Thermo-optic all-optical phase tuning is achieved using an ENZ material as a compact, low-loss, and efficient optical heat source. For a 10-[Formula: see text]m-long ENZ/Si waveguide, insertion loss below 0.5 dB for the transverse electric (TE) polarization is predicted together with a high control efficiency of [Formula: see text] [Formula: see text]. Our proposal provides a new approach to achieve all-optical, on-chip, and low-loss phase tuning in silicon photonic circuits.
| S-EPMC8096950 | biostudies-literature
Project description:We demonstrate an electrically tunable ultracompact plasmonic modulator with large modulation strength (>10?dB) and a small footprint (~1 ?m in length) via plasmon-induced transparency (PIT) configuration. The modulator based on a metal-oxide-semiconductor (MOS) slot waveguide structure consists of two stubs embedded on the same side of a bus waveguide forming a coupled system. Heavily n-doped indium tin oxide (ITO) is used as the semiconductor in the MOS waveguide. A large modulation strength is realized due to the formation of the epsilon-near-zero (ENZ) layer at the ITO-oxide interface at the wavelength of the modulated signal. Numerical simulation results reveal that such a significant modulation can be achieved with a small applied voltage of ~3V. This result shows promise in developing nanoscale modulators for next generation compact photonic/plasmonic integrated circuits.
| S-EPMC6391484 | biostudies-literature
Project description:In this work, we observe plasmon-induced hot electron extraction in a heterojunction between indium tin oxide nanocrystals and monolayer molybdenum disulfide. We study the sample with ultrafast differential transmission, exciting the sample at 1750 nm where the intense localized plasmon surface resonance of the indium tin oxide nanocrystals is and where the monolayer molybdenum disulfide does not absorb light. With the excitation at 1750 nm, we observe the excitonic features of molybdenum disulfide in the visible range, close to the exciton of molybdenum disulfide. Such a phenomenon can be ascribed to a charge transfer between indium tin oxide nanocrystals and monolayer molybdenum disulfide upon plasmon excitation. These results are a first step toward the implementation of near-infrared plasmonic materials for photoconversion.
| S-EPMC9619877 | biostudies-literature